Butler & Cook, Inc. v. Ozark Warehouses, Inc. , 2015 Ark. App. LEXIS 251 ( 2015 )

Cite as 2015 Ark. App. 214
ARKANSAS COURT OF APPEALS
DIVISION III
No. CV-14-843
Opinion Delivered April 1, 2015
BUTLER & COOK, INC. APPEAL FROM THE SEBASTIAN
APPELLANT COUNTY CIRCUIT COURT, FORT
SMITH DISTRICT
[No. CV-2013-569]
V.
HONORABLE J. MICHAEL
OZARK WAREHOUSES, INC., d/b/a FITZHUGH, JUDGE
CORRUGATED SPECIALTIES
APPELLEE REVERSED and DISMISSED
LARRY D. VAUGHT, Judge
Appellant Butler & Cook, Inc. (B&C), appeals the order entered by the Sebastian County
Circuit Court, finding in favor of appellee Ozark Warehouses, Inc., d/b/a Corrugated Specialties
(Corrugated), on its negligence claim and awarding Corrugated $12,000 damages. On appeal,
B&C argues that the trial court clearly erred in (1) finding that Corrugated suffered damages, (2)
finding that B &C was negligent, and (3) failing to assign comparative fault to Corrugated. We
agree with B&C’s first and second points on appeal; therefore, we reverse and dismiss.
Corrugated produces boxes and packaging supplies. In January 2012, Corrugated sought
to purchase a used rotary die-cutter machine from a company in Pennsylvania. The rotary die-
cutter machine was a thirty-six-year-old, eighty-foot-long industrial machine used to print and
die-cut corrugated boxes. Corrugated’s plant manager, Rodney Canada, testified that Corrugated
was interested in the machine because it had two print sections, which had the capability of
printing two colors on a box. Each print section was supposed to have a top (called the print-
Cite as 2015 Ark. App. 214
impression roller) and bottom roller, and box material was fed between the rollers for printing.
The rollers are approximately nine feet long and made of cast iron.
Rodney Canada traveled to Pennsylvania to inspect the machine and observed that only
one of the print sections worked. The other print section was inoperable because its print-
impression roller was missing. According to Canada, the roller had been removed from the
machine and was sitting outside under a covered dock. He testified that the roller had been
sitting outside in the moisture and humidity, it was rusted, it had two cracks in it (one was a foot
long and the other was six inches long), and it was missing an end plate, which prevented it from
being installed into the machine and rotating on its axis. Canada testified that the roller was an
unusable “pile of junk.” He said that Corrugated opted to purchase the machine, with the
broken roller “as is,” for a $20,000 reduction in the sales price.
The machine was transported to Arkansas, and in February 2012, Canada contacted Ivan
Cummings, a machinist and mechanic for B&C, to provide an estimate to repair the broken
print-impression roller. Canada said that he showed Cummings the broken roller and told him
that he wanted it to operate like the print-impression roller that was operable. Canada said that
the repairs would include welding the two cracks in the roller and adding an end plate. Canada
said that Cummings asked whether the roller needed to be “turned down.”1 Canada testified that
he told Cummings the most the roller could be turned down was twenty one-thousandths of an
inch. Canada said, “It has got to be parallel, it has got to be straight; that is the whole key to it.”
1
According to the testimony at trial, to “turn down” (also known as “true up”) the roller
meant that a lathe shaved or trimmed down the roller so that its diameter was the same
thickness all the way around it.
2
Cite as 2015 Ark. App. 214
Canada stated that if the roller was turned down too far, it would not work because the roller
would not touch the boxes running underneath it and would not be able to print on them.
Neither Canada nor Cummings took measurements of the roller.
On February 27, 2012, B&C tendered a sales order to Canada, offering to do the repairs
to the roller for $7032.38. The sales order also provided:
REBUILD ROLLER FROM OLD ROLLER
***CAST IRON ROLLER, NO WARRANTY ***
Canada conceded that he did not include the specification that the roller could not be turned
down more than twenty one-thousandths of an inch in the sales order and that, in hindsight, he
should have. Nevertheless, he signed the sales order on March 28, 2012, and later that day B&C
picked up the roller and transported it to its shop.
Cummings testified that Canada did not show him (Cummings) the roller from the
operable print section and did not tell him the specification that no more than twenty one-
thousandths of an inch could be taken off the roller. According to Cummings, the only
instruction given by Canada was that the broken roller needed to be “trued up.” Cummings said
that the roller would not work unless it was true. Cummings testified that he told Roger Lane,
the B&C machinist who turned down the roller, exactly what Canada instructed—that the roller
had to be “trued up.”
Matt Nicely, the fabrication-shop supervisor at B&C, testified that B&C welded the
cracks in and fabricated a new end plate for the broken roller. Nicely testified that he did have
concerns about the welds holding because of the age of the roller. He said that “[the roller was]
worn out, it [was] fatigued out, its life span [was] up, and what I am going to do to it is probably
3
Cite as 2015 Ark. App. 214
not going to hold.” He added that based on the condition of the roller, he was surprised that he
was asked to repair it. Accordingly, he asked that the sales order reflect that there was no
warranty on the work.
After the cracks in the roller had been welded and the end plate added, Lane testified that
he worked on the roller. Lane said that because the roller was “out of round,” he was instructed
by Cummings to “put [the roller] in the lathe and machine it until it was true across the diameter
and the length of [the roller].” Cummings said that the roller “needed to be turned until the
whole surface was true—100 percent clean up . . . until there is no deviation in the surface
whatsoever.” Lane said that Cummings did not give him any specifications or dimensions;
however, Lane said that he was told to take off the minimum amount to make the roller “one-
hundred percent cleaned up.” Lane testified that he did not know the dimensions of the roller
before he worked on it, he did not know how much iron he took off the roller, and he did not
know the dimensions of the roller after he had worked on it.
In May 2012, B&C delivered the repaired roller to Corrugated, and Corrugated paid B&C
$7032.38 for the repairs. Canada said that he did not take any measurements of the roller but
that it looked good. The roller was installed into the die-cutter machine in June 2012. When
Canada ran the first print job through the repaired print section, there was no print on the boxes
because the gap between the repaired roller and the bottom roller was too wide.2 Canada
2
The repaired roller did not print on 3/16-inch box material, which was the type of
boxes Corrugated worked with ninety percent of the time. The repaired roller did print on
thicker box material—three-eighths of an inch or half an inch. However, the evidence
demonstrated that Corrugated did not use 1/2-inch box material and used 3/8-inch box
material ten percent of the time.
4
Cite as 2015 Ark. App. 214
concluded that B&C had turned down the broken roller too much and reported his conclusion
to B&C. B&C’s response was that there was no warranty on their work. Corrugated’s negligence
complaint followed.3
On the issue of damages, Canada testified that the value of the roller before and after
B&C worked on it was zero or scrap value. Over the objection of B&C, Canada added that the
value of the roller—had it been properly repaired—would have been $20,000. Canada also
testified that in an effort to make the repaired roller work, he had a print-impression blanket
made. The blanket was wrapped around and adhered to the roller, adding approximately a
quarter of an inch in diameter to it. Using the blanket, Canada testified that the repaired roller
was able to print on boxes 3/16-inch thick and, while the printing was not perfect, for the past
two years the machine had been printing two colors. Canada said that Corrugated paid $2998
for the blanket, which Canada testified was a temporary fix.
Rick Watson, the chief operating officer at Corrugated, testified that the value of the
roller when it was purchased was $0 and that the current value of the roller was $0. He also
testified (over the objection of B&C) that had the roller been repaired so that it would print on
3/16-inch thick boxes, it would have had a value of $12,000–$15,000. Watson testified that
because the roller would not print on boxes 3/16-inch thick, Corrugated would have to purchase
a new print-impression roller or a new print-impression blanket. He added that Corrugated had
suffered and would suffer lost profits.
3
Corrugated’s complaint alleged that B&C failed to follow the instruction to reduce the
diameter of the roller by only twenty one-thousandths of an inch, failed to monitor and
measure the diameter of the roller as the repair work was being performed, and failed to
perform the repair work in a workmanlike and skillful manner.
5
Cite as 2015 Ark. App. 214
Thereafter, the trial court entered an order finding in favor of Corrugated on its
negligence claim. Specifically, the trial court found that the “no warranty” provision in the sales
order applied only to the welding work. The court further found that Canada told Cummings
that the roller could be turned down not more than twenty one-thousandths of an inch and that
this specification was not relayed to Lane. The trial court found that Lane was told by
Cummings to true up the roller and too much was trimmed off the roller, which resulted in a
roller that would not print on 3/16-inch box material. The court, applying the “before and after
valuation method,” found that Corrugated suffered $12,000 damages.4
B&C brings this appeal from the trial court’s order. In bench trials, the standard of
review on appeal is whether the trial court’s findings were clearly erroneous or clearly against the
preponderance of the evidence. Schueck v. Burris, 330 Ark. 780, 785, 957 S.W.2d 702, 704–05
(1997) (citing Superior Improvement Co. v. Mastic Corp., 270 Ark. 471, 604 S.W.2d 950 (1980); Ark.
R. Civ. P. 52).
In its negligence cause, Corrugated was required to prove that it sustained damages, that
B&C was negligent, and that B&C’s negligence was the proximate cause of its damages. Schueck
v. Burris, 330 Ark. at 785, 957 S.W.2d at 705 (citing Anselmo v. Tuck, 325 Ark. 211, 924 S.W.2d
798 (1996)). B&C’s first point on appeal is that the trial court clearly erred in finding that
Corrugated proved damages.
The parties agree that the measure of damages to personal property is calculated by
determining the difference in the fair market value of the property immediately before and
4
The trial court denied Corrugated’s request for lost profits and future damages, and
Corrugated has not cross-appealed that issue.
6
Cite as 2015 Ark. App. 214
immediately after the occurrence. Sw. Bell Tel. Co. v. Harris Co. of Fort Smith, 353 Ark. 487, 490,
109 S.W.3d 637, 638 (2003); see also Daughhetee v. Shipley, 282 Ark. 596, 600, 669 S.W.2d 886, 888
(1984). Arkansas Model Jury Instruction 2227 likewise provides that the measure of damages for
injury to personal property is the difference in the fair market value of the property immediately
before and immediately after the occurrence.5 AMI Civ. 2227 (2014).
There was significant evidence at trial concerning the value of the roller before B&C
began working on it. The roller was thirty-six-years old, rusty, cracked in two places, had no end
plate, and was “out of round.” Canada testified that it was a “a pile of junk.” Nicely, who
repaired the cracks and added the end plate, testified that the roller was worn out and fatigued.
He said that its “life span [was] up” and that he was surprised that he was asked to repair it.
Canada and Watson testified that the value of the roller when it was purchased was $0.
Therefore, based on the undisputed evidence, the fair market value of the roller before B&C
worked on it was $0. As for the fair market value of the roller after B&C worked on it, Canada
and Watson testified that its value was $0. Applying the before-and-after-valuation method,
Corrugated’s damages are $0—the difference between $0 and $0. Therefore, Corrugated failed
to prove the required element of damages.
We note that the trial court’s order cited the proper measure of damages; however, it did
not properly apply the evidence to that measure. The trial court found that Corrugated sought
an award of $12,000–$15,000 for the roller and awarded $12,000. These figures came from
5
The instruction includes a bracketed provision stating that “in determining this
difference you may take into consideration the reasonable cost of repairs.” The Note on Use
provides that the bracketed clause is to be used only when there is evidence of the cost of
repairs. There is no such evidence in the case.
7
Cite as 2015 Ark. App. 214
Watson’s testimony that the roller would have had the value of $12,000–$15,000 if it had been
repaired properly. This is not evidence of the fair market value of the roller either before or after
B&C worked on it.6 Therefore, we hold that the trial court clearly erred in awarding Corrugated
$12,000 damages. Accordingly, we reverse on this point.
B&C’s second point on appeal is that the trial court clearly erred in concluding that it was
negligent. Negligence is the failure to do something which a reasonably careful person would do,
or the doing of something which a reasonably careful person would not do. Mangrum v. Pigue, 359
Ark. 373, 383, 198 S.W.3d 496, 501 (2004). Negligence is never presumed. Id., 198 S.W.3d at 501
(citing Morehart v. Dillard Dep’t Stores, 322 Ark. 290, 908 S.W.2d 331 (1995)). The burden rests
upon the party asserting negligence to show by a preponderance of evidence that his injuries
were caused by some negligent act or omission of appellees. Id. at 386, 198 S.W.3d at 503. While
a party may establish negligence by direct or circumstantial evidence, he cannot rely upon
inferences based on conjecture or speculation. Id. at 383, 198 S.W.3d at 501.
Corrugated argued that B&C was negligent because it trimmed too much off the roller,
and the trial court agreed. However, it cannot be determined that B&C trimmed too much off
the roller because Corrugated never presented any evidence of the size of the roller before B&C
worked on it.7 It is undisputed that no one took any measurements of the roller before B&C
6
If Corrugated had sued in contract and prevailed, the figures used by the trial court may
have been appropriate because the purpose of damages in a contract action is to place the
injured party in the same position he or she would have been in had the contract been
performed. Cozart v. Logue, 2014 Ark. App. 626, at 4–5, 447 S.W.3d 133, 137.
7
There was some evidence that the die-cutter machine’s original roller would have had
a diameter of twenty-two inches; however, Canada stated—in direct response to the trial court’s
questioning—that he did not know if the roller at issue was the original.
8
Cite as 2015 Ark. App. 214
made repairs to it. Without evidence of the dimensions of the roller before B&C worked on it,
it is impossible to conclude that B&C removed more than twenty one-thousandths of an inch
from it. In fact, there is no evidence in this record how much B&C trimmed from the roller. All
that was proved was that B&C trimmed the roller an amount sufficient to make it round and
true—the precise amount is unknown. Because Corrugated failed to prove the size of the roller
before B&C worked on it, there was no proof that the roller could have been made round and
true by taking off twenty one-thousandths of an inch or less, and there was no proof that the
diameter that remained after the roller was trued up would be big enough to print on box
material.
Moreover, without knowing the measurements of the roller, it is entirely possible that the
diameter of the roller was too small to print before B&C worked on it. Canada testified that he
never observed the roller in operation in Pennsylvania, and there was no evidence that the
previous owner used it in its broken state. In its broken state, the roller was thirty-six-years old,
rusty, cracked, missing parts, out of round, and “worn out.” In that condition, it is possible that
it was too small to print on any thickness of box material and that no repairs could have made
it print.
For these reasons, we hold that Corrugated failed to present evidence to support its
negligence claim. And negligence is not imposed in the absence of proof. Mangrum, 359 Ark. at
386, 198 S.W.3d at 503. Without proof, the trial court must have relied on conjecture and
speculation, which cannot be permitted to supply the place of proof. Id., 198 S.W.3d at 503.
9
Cite as 2015 Ark. App. 214
Therefore, we hold that the trial court clearly erred in finding that B&C was negligent.
Accordingly, we reverse on this point as well.
B&C’s third and final point on appeal is that the trial court clearly erred in failing to
assign comparative fault to Corrugated. Because we hold that Corrugated failed to prove that
B&C was negligent, this point is moot.
Reversed and dismissed.
ABRAMSON and KINARD, JJ., agree.
Smith, Cohen & Horen, PLC, by: Matthew T. Horan, for appellant.
Robertson, Beasley, Shipley & Redd, PLLC, by: Mark E. Ford, for appellee.
10