Transitron Electronic Corporation v. Hughes Aircraft Company, Transitron Electronic Corporation v. Hughes Aircraft Company , 649 F.2d 871 ( 1981 )

649 F.2d 871

210 U.S.P.Q. 161

TRANSITRON ELECTRONIC CORPORATION, Plaintiff, Appellant,
v.
HUGHES AIRCRAFT COMPANY, Defendant, Appellee.
TRANSITRON ELECTRONIC CORPORATION, Plaintiff, Appellee,
v.
HUGHES AIRCRAFT COMPANY, Defendant, Appellant.

Nos. 80-1234, 80-1235.

United States Court of Appeals,
First Circuit.

Argued Sept. 10, 1980.
Decided April 15, 1981.

David Wolf, with whom Louis Orenbuch, Milton Oliver, Boston, Mass., and Wolf, Greenfield & Sacks, P. C., Boston, Mass., were on brief, for Transitron Electronic Corp.

John R. Hally, Boston, Mass., with whom Mary Lee Jacobs, and Nutter, McClennen & Fish, Boston, Mass., were on brief, for Hughes Aircraft Co.

Before CAMPBELL and BOWNES, Circuit Judges, and NELSON,* District Judge.

LEVIN H. CAMPBELL, Circuit Judge.

1

This case requires us to explore the kind of showing a patent licensee needs to make in order to recover royalties already paid under a license agreement when the patent itself is subsequently declared invalid. The main appeal is brought by Transitron Electronic Corporation from a judgment rendered by the district court in favor of Hughes Aircraft Company, the defendant in Transitron's action for restitution and damages arising out of a patent licensing agreement.

I. Background

2

On March 31, 1950, Hughes filed a patent application for a "glass-sealed semi-conductor crystal device," which had been invented by Harper Q. North and Justice N. Carman, Jr. The invention is described in this court's opinion in General Instrument Corp. v. Hughes Aircraft Co., 399 F.2d 373, 374 (1st Cir. 1968), as well as in the opinion of the district court, 487 F.Supp. 885, 889 (D.Mass.1980). The patent, No. 2,694,168, was issued on November 9, 1954. On different occasions in the period 1950 through 1954, Hughes amended its application by adding claims purporting to describe in greater detail the invention itself and the process of producing it. The present case involves two of these amendments, filed on July 27, 1954 as claims 102 and 103, which the patent office allowed on September 2, 1954 as claims 60 and 61.

3

On March 20, 1951, a year after it had first filed for the United States patent, Hughes applied for a British patent on the same invention. The British patent was issued on November 24, 1954, as No. 721,201. The same material embodied in claims 60 and 61 of the United States patent, together with a three-page preamble, was filed in Great Britain, on November 8, 1954, not as a claim under the parent patent, but as a separate improvement in an application for a British Patent of Addition.

4

Beginning in 1954, Hughes investigated possible infringement of its patent rights by several manufacturers, including Transitron. Notices were sent out charging infringement and offering non-exclusive licenses. On June 1, 1962, Hughes and Transitron executed a five-year license agreement, giving Transitron the right to manufacture diodes covered by claims 60 and 61 of Hughes' patent in exchange for a one percent royalty and for licenses under certain patents held by Transitron. Transitron manufactured under this license until October 1, 1962, at which time it notified Hughes that it had switched to a manufacturing process outside the Hughes patent. In 1966, Hughes discovered that Transitron was once again manufacturing diodes covered by the license. After Hughes demanded back royalties, the parties agreed to a lump sum settlement and renewal of the license agreement. Transitron operated under the license for several months and then again announced that it had switched to another method.

5

In 1967, Hughes sued General Instrument Corporation for infringement of claims 60 and 61. Hughes Aircraft Co. v. General Instrument Corp., 275 F.Supp. 961 (D.R.I.1967). General Instrument responded by challenging the validity of these claims. Hughes prevailed in the district court; on appeal, however, this court reversed, holding that claim 60 was new matter, not supported by the original patent application, in violation of 35 U.S.C. § 132.1 General Instrument Corp. v. Hughes Aircraft Co., 399 F.2d 373 (1st Cir. 1968).2 Noting that commercial sales of the diode embodying the new matter had commenced over a year prior to filing, we declared claim 60 to be invalid, 399 F.2d at 377, 380. In reaching that conclusion, this court emphasized the preamble that was filed as part of Hughes' application for the British Patent of Addition, but that had not been provided to the United States patent office.3 Id., at 376.

6

Transitron brought this action in 1970. Count I was in antitrust, resting on the theory that Hughes had used the patent (in particular claims 60 and 61), which it was said to have procured through fraud on the patent office and in violation of the Invention Secrecy Act, 35 U.S.C. §§ 181-188, to coerce Transitron and others to enter into licensing agreements. Treble damages were sought. Count II, relying on much the same factual allegations, sought the return of all royalties for patent misuse. Count III likewise sought the return of royalties, but on the theory that Hughes' false and misleading representations to the patent office as reflected in the file wrapper were material misrepresentations which induced Transitron to take a license. Alternatively, return of royalties was sought on the theory that the parties' belief that claims 60 and 61 were valid constituted a mutual mistake of fact.

7

Hughes counterclaimed for certain back royalties, asserting that the 1966 settlement was invalid because Transitron had misrepresented to Hughes the extent of its use of Hughes' patent between 1962 and 1966.

8

After an eight-day trial, the district court granted judgment for Hughes on all of Transitron's claims and for Transitron on Hughes' counterclaim. Both parties have appealed, although Hughes indicates that it chooses not to press its cross-appeal should we now hold against Transitron on Transitron's claim. We affirm the judgment of the district court in both cases.

9

On appeal, Transitron presses exclusively its tort and contract theories for recovery of back royalties.4 These have been somewhat amplified from their presentation in the district court, and appear to be, in essence, as follows: (1) In causing Transitron to accept a license and pay royalties, Hughes benefited from conduct that was, at least, negligently deceptive and, at worst, deliberately fraudulent, and that, in either event, such conduct amounted to a tort entitling Transitron to the return of its royalties and to consequential damages; (2) Whether or not Hughes' conduct amounted to fraud or another tort, Transitron is entitled to rescind the licensing agreement and have its royalties returned as the agreement was invalid for lack of consideration. Under each of its theories Transitron asserts a right to recover all royalties paid to Hughes under the license. Since the claim of failure of consideration is just another way of saying that the patent is invalid, we do not treat this theory separately. We begin by considering the law on recovery of royalties by a patent licensee.

10

II. The Legal Standard for Restitution of Royalties

11

In Lear, Inc. v. Adkins, 395 U.S. 653, 89 S.Ct. 1902, 23 L.Ed.2d 610 (1969), the Supreme Court held that a patent licensee would no longer be estopped from challenging the validity of the patent under which he was licensed and, if successful, from rescinding the licensing agreement. Circuit courts since Lear are agreed, however, that while such an adjudication of the patent's invalidity will permit rescission of the agreement, it will not, without more, allow the licensee to recover royalties paid prior to bringing suit. St. Regis Paper Co. v. Royal Industries, 552 F.2d 309, 313 (9th Cir.), cert. denied 434 U.S. 996, 98 S.Ct. 633, 54 L.Ed.2d 490 (1977); Zenith Laboratories v. Carter-Wallace, 530 F.2d 508 (3d Cir.), cert. denied, 429 U.S. 828, 97 S.Ct. 85, 50 L.Ed.2d 91 (1976); Troxel Manufacturing Co. v. Schwinn Bicycle Co., 465 F.2d 1253 (6th Cir. 1972). See also Nashua Corp. v. RCA Corp., 431 F.2d 220 (1st Cir. 1970); Drackett Chemical Co. v. Chamberlain Co., 63 F.2d 853, 854-55 (6th Cir. 1933). In Troxel the Sixth Circuit discussed the reasons for this rule, emphasizing the equities between licensor and licensee, and the policies favoring early adjudication of patent validity and encouragement of the use of the patent system by protecting the security of royalty income. The Troxel court pointed out how undesirable it would be if a patentee took all royalty payments subject to the danger of having to disgorge them at an uncertain future date to a licensee who, during the period in which the royalties were paid, had himself enjoyed the protection of the patent and immunity from suit under it. Were the law thus, the value of patents might be so diminished as to discourage inventors from procuring them, with the result that inventions would be kept secret rather than publicly disclosed as the patent system requires. We fully agree with the reasoning in Troxel and accept as a general rule that a licensee may not recover royalties he has already paid for use of a patent which is subsequently declared invalid.

12

Troxel and the above cases mention one exception to this rule. The exception occurs when a patent holder has induced the licensee to enter into the license agreement through fraud; in such event, the licensee is entitled to restitution of his royalty payments. While we have found only one case in which this exception was actually applied, Ampex v. Memorex Corp., 205 U.S.P.Q. 794 (N.D.Cal.1980),5 such an exception plainly exists. In addition to cases cited in the previous paragraph, see, e. g., In re Multidistrict Litigation Involving Frost Patent, 398 F.Supp. 1353 (D.Del.1975), aff'd in part, rev'd in part, 540 F.2d 601 (3d Cir. 1976); SCM Corp. v. RCA, 318 F.Supp. 433, 470-72 (S.D.N.Y.1970). The fraud exception does no violence to the policies described in Troxel. It does not unduly burden a patent holder's reasonable expectations since fraud, if ever alleged, would have to be proven by clear and convincing evidence, Norton v. Carborundum, 530 F.2d 435, 444 (1st Cir. 1976), and the patent holder would have to be proven not merely careless but to have intended to deceive. An honest patentee, therefore, will have little to fear, while a dishonest patentee can scarcely complain if later stripped of ill-gotten gains.

13

Transitron asks us to broaden the fraud exception in two respects: First, it urges us to recognize a right in a licensee to recover royalties from a licensor following invalidation of a patent solely upon a showing that the licensor committed fraud on the patent office in procuring his patent, without any necessary showing of a fraudulent misrepresentation in the licensing transaction itself. Second, Transitron urges us to accept as fraud, for this purpose, a category of conduct involving something less than knowing and deliberate misrepresentation, such as gross negligence.6 Transitron cites no direct precedent for these proposed rules; it relies on state laws authorizing rescission of contracts7 and on the federal patent law policies requiring candor in dealings with the patent office.

14

As already indicated, the Troxel rule that we adopt rests on patent law policies and on the equities between licensor and licensee. Any exception must fit within those policies and equities. Transitron argues that the equities between licensor and licensee are shifted whenever a patent holder has committed misconduct against the patent office, and that to require a refund of royalties for such misconduct would punish a wrongdoer, not force the patent holder into the role of guarantor of the debatable legal conclusion of patent validity. But if fraud on the patent office, without more, were ground for recovery of royalties, a licensee who knew, suspected, or later found that a patent was fraudulently procured would be in the same position as one who suspected invalidity on other grounds; he would have an incentive to delay challenging the patent, enjoying the competitive advantage of the license and avoiding the necessity of defending an infringement suit, secure in the knowledge that he could recoup his royalty costs later. The relevant question, we think, is whether there was fraud perpetrated on the licensee at the time he entered into the license. It is when the deception infects the licensing transaction itself, so that one who might otherwise have chosen to risk suit and challenge the patent is induced to take a license, that the policy of encouraging early challenge is unaffected by allowing restitution. We hold that a licensee may recover royalties paid only upon showing that he was induced to accept a license through fraud on the part of the licensor. Proof of fraud on the patent office may, to be sure, be highly material to such a showing; if one defrauds the patent office, the same fraudulent misinformation may carry over to the licensing negotiations. A licensor may expect a potential licensee to rely on information contained in patent office records relative to the application and patent. Still, the ultimate issue is not patent office fraud but fraud on the licensee. Zenith Laboratories v. Carter-Wallace, 530 F.2d at 514.

15

We further believe that a definition of fraud not requiring proof of actual bad faith would be inconsistent with the policies stated in Troxel. Transitron argues that the equities of the situation, as well as the need for candor in patent disclosures, favor a broad definition of fraud. In recent years, courts in patent matters have characterized something less than knowing and wilful misrepresentation as constituting fraud for some purposes. See W. R. Grace & Co. v. Western U.S. Industries, 608 F.2d 1214 (9th Cir. 1979), cert. denied, 446 U.S. 953, 100 S.Ct. 2920, 64 L.Ed.2d 810 (1980) (denying enforcement of patent because of patentee's "calculated recklessness about the truth"); Norton v. Curtiss, 433 F.2d 779 (C.C.P.A.1970) (accepting "gross negligence" as basis for striking patent application); Monolith Portland Midwest Co. v. Kaiser Aluminum & Chemical Co., 407 F.2d 288 (9th Cir. 1969) (awarding attorney's fees against a patent holder because of its "calculated recklessness about the truth"). In none of these cases, however, was the question whether back royalties could be recovered.8 We do not disagree that patent holders should be encouraged to be candid and careful in their dealings with licensees as well as with the patent office. But, in practice, it would be too easy, with the benefit of hindsight, to show that certain information should have been disclosed, and to characterize the failure as some species of "technical" fraud. It would be difficult for patent holders to take effective measures to guard against claims of this nature, which might be used as leverage to impose expensive settlements where the alternative would be to risk a ruinous liability for royalties collected over a period of many years. Transitron's proposed rule would blur all too readily with acceptance of a broad principle contrary to Troxel, allowing recovery for mere errors affecting the validity of a patent; the patent holder would then be subject to a constant risk of being required to disgorge royalties, and its creditors would hesitate to rely on royalty income. Such a broadening of the exception for fraud would undermine the security of royalty income and erode the economic value of patent rights, encouraging inventors to avoid public disclosure and resort instead to trade secrets. We hold that a licensee who would recover royalties paid to a licensor must establish nothing less than that he was induced to accept the license as a result of fraud in the normal sense. Mere patent invalidity is not enough, nor is a showing of "technical" fraud on either the patent office or the licensee, nor is a showing based on some theory of restitution or mistake.

III. Transitron's claims of fraud

16

Applying this standard, we uphold the district court's determination that Transitron is not entitled to recover back royalties. As stated in Norton v. Carborundum, 530 F.2d at 444, "(a)n allegation of fraud must be proved by clear, unequivocal and convincing evidence and not by a mere preponderance of the evidence which leaves the issue in doubt." As the question of fraud ordinarily is treated as a question of fact, an appellate tribunal must accept the district court's finding unless it is "clearly erroneous." Edward Valves, Inc. v. Cameron Iron Works, Inc., 286 F.2d 933, 947-48 (5th Cir.), modified on other grounds, 289 F.2d 355, cert. denied, 368 U.S. 833, 82 S.Ct. 55, 7 L.Ed.2d 34 (1961).

A. Hughes' Alleged Knowledge of Novelty

17

In the district court, Transitron sought to prove that Hughes knew at the time of filing claims 60 and 61 that they embodied new matter and that it deliberately withheld that information from the patent office. Transitron sought to show that the material filed as claims 60 and 61 had its source in a February 1952 invention by Harper Q. North, which North submitted to Hughes' patent department on disclosure form "PD 437." According to Transitron, Hughes put North's improved diode into immediate production, and produced it at the rate of 1,500 per day from the end of February 1952, compared with 10,000 to 20,000 per year under the earlier North/Carman process. Transitron asserts that Hughes' patent attorneys decided in May 1952 to apply for a patent on North's invention, but that the attorney in charge "simply forgot" until two years later, when it was too late to file a new application because the process had already been in public use for more than a year.9 Transitron asked the district court to infer that Hughes, upon realizing that it was too late to apply for a patent on the North invention, sought to obtain protection for this new invention by slipping it in as a claim under the 1950 North/Carman application. To support this assertion, Transitron cites Hughes' application for the British Patent of Addition, which expressly treated North's improvement as a development beyond the scope of the parent patent. Transitron contends that Hughes deliberately concealed the British Patent of Addition (BPA) from the United States Patent Office and from licensees in order to avoid the conclusion that the claims contained new matter. Transitron also cites as a misrepresentation Hughes' March 8, 1954 statement, in filing claims 60 and 61, that Hughes had actively sold its diodes for only nine months.

18

As we have indicated, charges of fraud on the patent office would not, in themselves, suffice to state a claim for restitution. However, Transitron's assertions, if true, might show that Hughes committed fraud on Transitron by representing, contrary to knowledge and belief, that its patent was valid, or by continuing to conceal from Transitron, when the license was negotiated, information material to validity which it had knowingly concealed from the patent office.

19

The district court, however, rejected Transitron's theory of deliberate fraud on the patent office, finding that "(t)here is no evidence that any of the Hughes patent counsel who worked on the prosecution believed the claims were novel but persisted in this effort to gain patent coverage by deliberately concealing that novelty from the examiner." 487 F.Supp. at 898. The district court relied particularly on the testimony of Harper Q. North and of David Doody, Hughes' Director of Patents since 1957. North testified that he considered claims 60 and 61 as simply "engineering improvements" on the original invention, which was the diode itself. Id. Doody, whom the district court found to be "candid and helpful," id., had not been present during the time of the patent prosecution. Later, Doody had reviewed material submitted by possible infringers asserting that the claims might not be supported by the original application, and he and his staff, as well as outside counsel, concluded that the claims were not new matter. It was Doody who negotiated the settlement with Transitron.

20

The district court also reviewed the evidence of the decision-making process among Hughes' attorneys regarding PD 437, and found it susceptible of a far more innocent interpretation than Transitron gave it. The court found no clear indication that the patent attorneys had decided how to prosecute PD 437 whether as a claim under the original invention or as a new invention. The court found the two-year hiatus in action on the claims attributable not to oversight, as Transitron asserts, but to Hughes' inability to obtain from Dupont information concerning the composition of its gold thermosetting compound, which North used to make his improved diode. The district court found that Hughes' patent attorney viewed the use of this compound, rather than any dimensional change, as the gist of North's improvement.

21

The district court also considered and rejected Transitron's urging that it find fraudulent misrepresentation in Hughes' March 1954 statement to the effect that it had been active in selling its diode for only nine months. The court understood the statement as an effort to demonstrate that the diode had achieved "commercial success" by showing that Hughes had sold a large quantity in a short time; the court implicitly rejected Transitron's view that the statement related to patentability under the one-year rule of 35 U.S.C. § 102(b). 487 F.Supp. at 901. The court noted also that Hughes' attorney may have intended this statement to refer back to September 1953, the date of the amendment to which the March 1954 statement was a supplement. If so, the reference to nine months would designate February 1953, a date when Hughes' diode was advertised widely. 487 F.Supp. at 900 n.4.

22

The district court also rejected Transitron's theory that Hughes' treatment of claims 60 and 61 as a separate improvement rather than as a clarification of the original patent disclosure, in its application for the British Patent of Addition, indicates that Hughes believed that the claims were new matter. The district court noted that Hughes could not have treated the material as claims under the parent patent in Britain, because under British law a patent application must be put in order within one year of filing. Hughes might also have been unable to obtain an independent patent for the material, since the diode was so similar to that disclosed in the main patent. Relying on its examination of correspondence between Hughes' British and American patent counsel, the district court concluded that a Patent of Addition, which protects inventions, was the best way under British law for Hughes to protect this subject matter.10

23

In sum, the district court concluded that "the Hughes lawyers and scientists had a good faith belief that these developments and modifications were improvements in the existing invention and were not new matter which required disclosure as such to the patent office." 487 F.Supp. at 900.11 The court noted that reasonable lawyers may differ on what constitutes new matter, and that the closeness of that question in this case is demonstrated by the fact that this court differed with the district court in General Instrument, supra, 399 F.2d 373.12 It is not the function of this court to review the evidence de novo, or to make our own judgment of the credibility of witnesses. Merrill Trust Co. v. Bradford, 507 F.2d 467, 468 (1st Cir. 1974); Custom Paper Products Co. v. Atlantic Paper Box, 469 F.2d 178, 179 (1st Cir. 1972). Particularly in light of the heavy burden of proof on the plaintiff to show fraud, we do not regard as clearly erroneous the district court's finding that Hughes did not commit knowing and wilful fraud in obtaining patent protection for claims 60 and 61.

24

B. Concealment of the British Patent of Addition

25

The district court did not make a specific finding on whether Hughes committed fraud on Transitron in connection with the licensing transaction, but we think a negative finding on this matter is implicit in the court's other conclusions. Since we accept the court's conclusion that Hughes had no knowledge or belief that its claims were new matter, Transitron's best case for fraud in the licensing transaction comes from Hughes' failure to disclose to Transitron the existence of the British Patent of Addition. This court's opinion in General Instrument demonstrates the persuasive power of the preamble, 399 F.2d at 376-80. Reliance was placed on the preamble and accompanying drawing for clarification of the exact nature and importance of the various structural and dimensional aspects of the claims and of the product and process which had been disclosed in the original filing. The explanation provided in the British filing played no small role in our conclusion that claim 60 was new matter, not supported by the original application. For example, in relation to the "one piece ductile lead wires" referred to in claim 60, the district court had concluded that the language of the original application could be interpreted as referring to one-piece wires. Relying on the BPA's reference to "composite leads * * * of Dumet wire" as a defect in the original diode, this court concluded that the original application did not support the "one piece wires" feature of claim 60. Id., at 377-78.

26

It is possible, therefore, that the BPA would have influenced Transitron's conclusion about the validity of the claims and its choice between accepting a license and challenging the patent. Thus had Transitron established that Hughes deliberately concealed the BPA, we might consider fraud to be shown. But the district court found no such wilful concealment; rather, it found Hughes' failure to disclose the BPA attributable to defects in Hughes' internal recordkeeping. 487 F.Supp. at 907.13 Hughes asserted that those among its staff who prosecuted the United States application and who handled licensing negotiations were simply unaware of the BPA. This assertion may seem implausible; this court expressed skepticism in General Instrument, 399 F.2d at 381. But the district court accepted it,14 and the record contains no evidence that Hughes' staff knew of the BPA or that they deliberately concealed it. There was, moreover, undisputed testimony from David Wolf, who represented Transitron in its negotiations with Hughes, that Transitron never requested a list of Hughes' foreign patents. Rather Transitron requested either a license under any corresponding foreign patents or a release from liability for infringement of any foreign patents. Hughes chose to grant the latter. Transitron asks us to infer that Hughes made this choice in order to avoid revealing the existence of the BPA. But fraud must be proven by clear and convincing evidence; we cannot say the district court clearly erred in refusing to make this inference.

C. Violation of the Invention Secrecy Act

27

Transitron also puts forward a theory of fraud based on the Invention Secrecy Act, 35 U.S.C. §§ 181-188. This statute allows certain government officials to screen patent applications before the information disclosed in them is published and to issue secrecy orders when they determine that publication of the information may be detrimental to national security. Under section 184, one who wishes to file a patent application in a foreign country must either wait six months from the date of filing the application in the United States or obtain a license from the Commissioner of Patents. Violation of this requirement is punishable by fine or imprisonment under section 186, as well as, under section 185, by denial of a United States patent on the invention or invalidity of a patent which has been issued.15 Transitron asserts that Hughes violated section 184 by filing its application for the British Patent of Addition without either obtaining a license or filing the identical information with the United States Patent Office at least six months before filing in Britain, so that Hughes' patent was invalid from the time of its issuance. To complete this theory of fraud, Transitron must argue not only that Hughes' patent was invalid because of this violation, but that Hughes knew or believed that its patent was invalid on this ground when it negotiated the license agreement with Transitron, and that it deliberately concealed this fact from Transitron.16

28

The district court considered this theory and rejected it. 487 F.Supp. at 903. The court held that Hughes was not required to seek a license for foreign filing because claims 60 and 61, which it found to be "virtually identical" to the British filing, were filed (as claims 102 and 103) on March 8, 1954, more than six months before the filing of the British application on November 8, 1954. Transitron does not dispute the dates cited by the district court; its challenge is to the court's holding that Hughes' United States filing and the British filing were sufficiently identical for the United States filing to trigger the six month waiting period.17

29

We turn therefore to the question of identity between claims 60 and 61, as filed in the United States, and Hughes' application for the British Patent of Addition. Neither the statute itself, 35 U.S.C. § 184, nor the regulations under it provide much guidance on the question of what constitutes an application for purposes of triggering the six-month waiting period, although the regulations related to the scope of licenses for foreign filing do suggest an effort by the patent office to ensure its opportunity to review in advance the details of any disclosure to be made in a foreign application.18 A few cases have addressed this issue, but the courts involved have adopted conflicting standards. In In re Gaertner, 604 F.2d 1348 (C.C.P.A.1979), the Court of Customs and Patent Appeals adopted a strict standard, indicating that any and all information filed abroad must first be submitted for national security review. Other courts, however, have held that only discrepancies "essential to the identity of the invention" could trigger operation of the Act. Beckman Instruments, Inc. v. Coleman Instruments, Inc., 338 F.2d 573, 576 (7th Cir. 1964); Control Systems Research, Inc. v. Aerotech, Inc., 429 F.Supp. 914, 917 (W.D.Pa.1977); Blake v. The Bassick Co., 245 F.Supp. 635, 636 (N.D.Ill.1965). In Control Systems the court indicated that the Act would not apply to differences necessitated by a foreign language or by the "idiosyncracies of practice in a foreign patent office." Id., at 917.

30

Comparing claims 60 and 61 (Appendix I) with the specifications for the BPA (Appendix II), we note that the language of the actual claims in the two filings is very similar. The most noticeable difference between the two filings is not in the claims themselves, but in the filing with the British application of a three-page preamble, which explains in detail the difficulties with the earlier diode production and the advantages of the claimed improvement, and an accompanying drawing, both of which were not filed in the United States. The district court found that this preamble was submitted on the advice of British patent counsel. 487 F.Supp. at 902. Our opinion in General Instrument, 399 F.2d 373, establishes that the differences between claims 60 and 61 and the BPA were of considerable significance for the purpose of evaluating the claims to decide whether they involved new matter. Whether the differences are significant for purposes of the Invention Secrecy Act is another question, however. We think it clear that the discrepancies go beyond the language and style of practice differences that Control Systems would permit; we are less certain that they are essential to the identity of the invention, so as to fail the test applied in that case and others agreeing with it. If we were to apply the stricter test of Gaertner, condemning any unauthorized foreign disclosure without considering its significance for national security, we think a strong case could be made that Hughes committed a violation of the Act. But Transitron's task in this case is to show not only that Hughes violated section 184, but also that the violation was so clear that Hughes must have known of it and of the consequent invalidity of its patent at the time it agreed to the license. Given the lack of consensus on the legal standard, and in light of Transitron's burden of proving fraud by clear and convincing evidence, we think the question of violation is close enough that we cannot impute to Hughes the requisite knowledge.

31

Transitron urges us to make an exception to the general rules against restitution for cases involving violation of the Invention Secrecy Act, even where the violation of the Act is not so clear as to form a basis for a finding of fraud. Transitron cites no authority, but relies on the policy underlying section 185 that compliance with the Act be strongly encouraged by depriving violators of any of the benefits of patent protection. Were a clear and knowing violation shown, we would have little hesitation in applying the punitive policy of section 185; but in such a case the licensor would be guilty of fraud, and the licensee would be entitled to restitution without the need for any special exception for the Invention Secrecy Act. In this type of case, where the question of violation of section 184 depends on a debatable legal conclusion as to whether the foreign filing and the corresponding United States filing were similar enough to meet the requirements of the Act, we think the reasoning of Troxel is applicable. Allowing recovery of royalties already paid would tend to encourage delay in challenging the validity of a patent, whether the ground of challenge is based on the Invention Secrecy Act or on other provisions of the patent laws. Similarly, a patentee who acts in the good faith belief that his patent is valid should not be subject to the continuing risk of liability for the return of royalties upon a finding of invalidity, no matter what the technical basis for invalidity of the patent.

32

Since we reject Transitron's theories of fraud, we do not review the district court's finding that Transitron did not rely on misrepresentations by Hughes, or its ruling that fraud in inducing agreement to a patent license cannot give rise to a tort claim.

33

Affirmed.

APPENDIX I

34

CLAIMS 102(60) AND 103(61) AS FILED WITH THE UNITED STATES

PATENT OFFICE

35

102. A semiconductor device comprising a vitreous envelope having an inner chamber and a longitudinal axis, said envelope including a tubular body section of substantially uniform external cross-section at right angles to said axis, and first and second end sections, at least the major portion of each of said end sections constituting a solid vitreous member having a cross-section at right angles to said axis equal to said external cross-section of said tubular section; first and second solid, one-piece lead wires extending through said first and second end sections, respectively, along said longitudinal axis and hermetically and directly sealed to said end sections, each of said lead wires having a first end terminating within said chamber, a semiconductor element mounted on, supported by and electrically connected to the first end of said first lead wire; and a resilient metallic element mounted on and supported by the first end of said second lead wire and contacting said semiconductor element; the length of the seal between each of said lead wires and the respective end section along said longitudinal axis being at least 1.5 times the maximum cross section dimension of the sealed portion of the lead wire.

36

103. A semiconductor device as defined in claim 102 in which transverse, outside dimension of said envelope is of the order of five times the maximum cross-sectional dimension of said lead wire.APPENDIX II

PATENT SPECIFICATION

37

Inventors: HARPER QUA NORTH and JUSTICE NEAL CARMAN, Jr.

38

(SEAL) 768,740

Date of Application and Filing

39

Complete Specification: Nov. 8, 1954.

40

No. 32309/54.

41

(Patent of Addition to No. 721,201,

42

dated March 20, 1951).

43

Complete Specification Published: Feb. 20, 1957.

Index at acceptance:--Class 37, K(1A3: 2E: 2J: 4A: 4X: 5).

International Classification:--H011.

COMPLETE SPECIFICATION

SEMICONDUCTOR CRYSTAL DEVICE

We, HUGHES AIRCRAFT COMPANY, a corporation organized and existing under the laws of the State of Delaware of the United States of America, of Florence Avenue at Teale Street, Culver City, California, United States of America, do hereby declare the invention, for which we pray that a patent may be granted to us, and the method by which it is to be performed to be particularly described in and by the following statement:

The present invention is a semiconductor crystal device, and is an improvement in that described in the Specification accompanying United Kingdom Patent No. 721,201.

A number of improvements have been made in the production process for the manufacture of glass sealed diodes which have been described in connection with Figs. 1 to 16 in the specification of the said United Kingdom Patent No. 721,201 (the parent patent). Certain basic improvements have also been made in the final construction of the glass sealed diode. The diode produced by the process described to the parent Patent, although a vast improvement over prior art diodes, itself suffers certain defects.

One of these defects was that it has composite leads made up of sections of Dumet wire which were welded to thicker copper wires with the junction between the sections of each composite lead being itself fused to the glass envelope. It has been found that this weld constituted a weak point in the lead which has been found to be somewhat too easily broken by the bending encountered in ordinary use. Also, because of the thickness of the copper lead, the bending arc tends to be concentrated in the neighborhood of the glass envelope and therefore causes cracking of the glass envelope, to which the copper lead is joined. In the modified diode of the present invention, one-piece flexible Dumet leads are used and extend entirely through the end sections of the glass envelope, thereby eliminating the difficulties which have been encountered with composite leads.

Another difficulty with the production process described in the parent Patent is that the bond between the semiconductor body and its associated lead wire must have a very high melting point to withstand the high temperatures applied to it during the first seal. Also, a special annealing process was required to be performed upon the semiconductor crystal body to remove crystal defects caused by the high temperature of the first seal. With the process now proposed for the production of the crystal device of this invention, the semiconductor body is bonded to its associated lead wire after the first seal is completed, thereby eliminating the described difficulties. Furthermore, since the semiconductor body is exposed to much lower temperatures in the present process, there is little or no oxidation of the surface of the semiconductor body and, therefore, the production step of etching the semiconductor body after the completion of the first seal, may be omitted.

As a modification of the device of this invention, the vitreous bond which, in the device of the parent Patent, existed between the semiconductor body and the enclosing envelope has been eliminated, for the reason that experience has shown that it is extremely difficult to match the temperature coefficients of the semiconductor body to that of the vitreous material with which it is in contact, and that, therefore, it is desirable to have as little as possible of the vitreous material in contact with the semiconductor body so as to avoid cracking the semi-conductor body during temperature cycling.

To this end, in the modified design of the semiconductor diode of the present invention, there is no direct bond between the semiconductor body and the enclosing glass envelope. The one-piece ductile lead wire which supports the semiconductor body extends directly through the massive end suction of the glass envelope into the enclosed space within the envelope and the semiconductor body is bonded only to the end of its associated lead wire and has no direct connection to the glass envelope.

Furthermore, in the device of the present invention great attention is paid to establishing a long continuous seal between the glass envelope and the Dumet lead which has a length equal to and preferably in excess of one and one-half times the diameter of the Dumet lead. Also, the diameter of the Dumet lead is such that the transverse dimension of the end cap which it penetrates and to which it is sealed is at least five times the diameter of the lead. It has been found that such proportioning of the end cap relative to the Dumet lead is essential in imparting to the completed diode the required resistance to thermal and mechanical shock and to twisting and bending of the lead wires. With an appreciably shorter seal, deformations of the external portions of the lead wires cause detrimental variations in the contact between the whisker and the semiconductor body. An appreciable increase in the thickness of the lead wire relative to the transverse dimension of the end cap has the effect of weakening the end cap and strengthening the wire so that flexing of the wire will cause cracking of the glass end cap or, at the very least, destruction of the hermetic seal between the lead wire and the end cap.

The present invention will be further described with reference to Figs. 1 to 5 of the accompanying drawings which illustrate a modified improved crystal diode, according to the present invention, in its various stages of assembly. Fig. 1 shows the component parts which are required for the assembly of a glass sealed diode according to the present invention. The required parts are two Dumet leads, 12 and 50 respectively, a contact element 48, a tubular glass body section 28, two glass beads 14 and 54, respectively, and a semiconductor body of silicon or germanium 16 which has metal platings 18 and 20 established on one face thereof.

Dumet leads 12 and 50 may be identical, and in the present diode have a diameter of .020 inches. Tubular glass body section 28 is of circular cross section. It is .0260 inches long and has an outside dimension of .095 inches and an inside diameter of .061 inches. Beads 14 and 15 may be identical and will ordinarily be short sections of glass tubing having an outside diameter slightly less than the inside diameter of tube 28. The length of these beads fairly well establishes the length of the seal between the lead wires and the end caps which will be formed, therefore these beads are made .062 inches long, thus allowing the creation of a seal which will be approximately three times as long as the .020 inch diameter of the Dumet lead wires. Beads 14 and 54 have an inside diameter of .022 inches, allowing them to be just slipped over the Dumet lead wires, and have an outside diameter of .055 inches. Contact element 48 is, in the present production process, composed almost entirely of molybdenum and has a diameter of .003 of an inch. Semiconductor wafer or body 16 has the dimensions of .035 X .035 X 0.15 . Metal platings 18 and 20 may be platings of copper and silver respectively, established in the manner described in the parent Patent. However, in the present production process, they are actually successive layers of antimony and gold condensed onto one face of wafer 16.

The first step in the production process is to fuse glass beads 54 and 14 to Dumet leads 50 and 12, respectively, as shown in Fig. 2. To effect this, the beads are merely slipped over their associated lead wires and heat is applied in the manner described in the parent Patent to fuse the beads to lead wires. Note that in Fig. 2 each of the single-piece Dumet leads extend entirely through its associated bead.

The next step in the production process is to form the first seal, this being effected by fusing bead 14 and lead 12 into tube 28 to form a partial body assembly shown in Fig. 3. To this end, lead 12 with attached fused bead 14 is slidden into one end of tube 28 and is positioned there while heat is applied in the manner described in the parent Patent to fuse bead 14 to tubular body section 28 thereby forming an integral massive end cap to the body section which has lead 12 extending therethrough and making an extended seal of the specified length thereto. The appearance of the semi-completed body assembly is shown in Fig. 3. Fig. 3 also illustrates the appearance of lead 50 after contact element 48 has been spot-welded to the short stub of lead 50 which projects through bead 54, thereby forming a semi-completed contact assembly.

In the next step in the production process as shown in Fig. 4 whisker 48 is kinked in an S shape to constitute a resilient or spring element, thereby forming a completed cats-whisker assembly. In the body assembly also shown in Fig. 4 semiconductor body 16 is inserted into the open end of tubular body section 28 and affixed to the stub end of lead 12 with a dab of silver or gold paste. Gold paste is presently used in our production process and contains as its principal constituents finely powdered gold dispersed in a thermosetting resin of the epoxy type softened by an appropriate chemical solvent. Ordinarily, the dab of gold paste is first laced on the plated or coated face of a semiconductor wafer 16 and wafer 16 is then picked up with an "air-chuck" placed against its opposite face and positioned against the stub end of lead 12, the daub of gold paste spreading to make contact between body 16 and lead 12 as shown in Fig. 4. An "air-chuck" is a slender tube through which negative pressure is constantly established by a vacuum pump. When the end of the tube is placed against one face of wafer 16, the wafer is retained in position thereon by the negative pressure at the tube orifice and may then be positioned wherever desired and finally released by shutting off the vacuum action.

After wafer 16 has been positioned within the body assembly, the assembly is baked thermally to set the resin in the gold paste permanently to bond body 16 to lead 12 with a strong electrically conductive joint. As described in the parent Patent, during the baking procedure a pre-bake at a temperature of the order of 100o C. is used, followed by a final bake at temperatures of the order of 500o C. The conductivity type of the crystal is not changed by the baking temperatures and subsequent annealing of the semiconductor body is not needed in the present production process. The appearance of the assembly after baking is completed and a conductive bond firmly established is shown in Fig. 4.

The last step in the production process is the final seal in which the completed cats-whisker assembly, which comprises lead 50, bead 54, and whisker element 48, as shown in Fig. 4, is inserted into and then fused to the body assembly which comprises tubular body 28, bead 14, lead 12, and semiconductor body 16, also shown in Fig. 4, to form the completed diode shown partially in section in Fig. 5. In formation of the final seal, the whisker assembly is inserted into tubular body 28, bead 54 sliding within tube 28 and whisker element 48 being advanced toward semiconductor body 16. When contact is made between whisker element 48 and semiconductor body 16, as evidenced by the appearance of electrical connection between leads 50 and lead 12, lead 50 is then advanced a predetermined amount, on the order of a few thousandths of an inch, to create a corresponding predetermined pressure between whisker element 48 and semiconductor body 16.

Heat is then applied by a radiant heating coil in the manner described in the parent Patent, to the region of the diode assembly in the neighborhood of bead 54. In a very short time bead 54 becomes fused to body 28 forming the final seal which completely and permanently hermetically closes the diode assembly of the present invention.

If desired, the whisker element 48 may be welded to semiconductor body 16 by passing a heavy surge of current through the circuit between leads 50 and 12. It has been found that the heat required to create the final seal is not sufficient in any way to injure a germanium or silicon semiconductor body which in the present production process is positioned within the glass package at the remote end of the enclosure from the source of heat. It has also been found that the temperatures reached during the final seal have the effect of annealing and relieving strains which were introduced in the glass by the high temperatures reached during the first seal; therefore, no intermediate glass annealing procedure is used, this constituting another significant change from the production process formerly used.

The massive end cap formed by the fusion of bead 54 to tubular body 28 permanently positions whisker element 48 in such manner that the contact between whisker element 48 and semiconductor body 16 cannot thereafter be disturbed even by extreme external forces applied to lead 50. The completed diode has substantially the same dimensions, of course, as the starting dimensions of the body section 28, that is, an outside diameter of .095 and an overall body length in the axial direction of approximately .0260 . The body diameter at the end caps of the diode package is sometimes slightly less than the maximum body diameter because of shrinkage of tubular body 28 down upon the glass beads to which it is fused, the decrease in diameter being of the order of a few thousandths of an inch, at times approaching as much as .010 of an inch.

What we claim is:

1

A semiconductor device comprising a vitreous envelope having an inner chamber and including an elongated tubular body section of substantially uniform external cross section at right angles to the axis thereof and having a maximum cross sectional dimension at right angles to said axis of the substantially one tenth inch, and first and second solid massive end sections, at least the major portion of each of said end sections constituting a solid vitreous member having a cross section at right angles to said axis substantially equal to said external cross section of said tubular body section; first and second solid, one piece ductile lead wires extending through said first and second end sections, respectively, along the said axis, substantially in the direction of said axis, and hermetically and directly sealed to said end sections, each of said lead wires having a first end terminating within said chamber, a semiconductor element affixed to, supported by and electrically connected to the first end of said first lead wire; and a resilient element affixed to, and supported by and electrically connected to the first end of said second lead wire and contacting said semiconductor element; the length of the seal between each lead wire and the respective end section being at least 1.5 times the maximum cross sectional dimension of the lead wire, and the transverse outside dimension of the said major portion of each of said end sections being at least five times the maximum cross sectional dimension of the corresponding lead wire

2

A semiconductor device comprising an elongated vitreous envelope having an inner chamber and including an elongated tubular body of substantially cylindrical shape and having a substantially uniform external diameter of substantially one-tenth inch, and first and second end sections, at least the major portion of each of said end sections comprising a cylindrical solid vitreous member having a cross section at right angles to the axis of said body equal to said external cross section of said tubular body section; first and second solid, one-piece ductile lead wires extending through said first and second end sections, respectively, along said axis substantially, of said vitreous envelope, and hermetically and directly sealed to said end sections, each of said lead wires having a first end terminating within said chamber, a semi-conductor element affixed to, supported by and electrically connected to the first end of said first lead wire; and a resilient metallic element affixed to, supported by and electrically connected to the first end of said second lead wire and contacting said semiconductor element; the length of the seal between each of said lead wires and the respective end section being at least 1.5 times the maximum cross sectional dimension of the sealed portion of the lead wire, and the transverse outside dimension of the said major portion of each of the end sections of said envelope being at least five times the maximum cross sectional dimension of said lead wire

CARPMAELS & RANSFORD,

Agents for Applicants

24

Southampton Buildings, Chancery Lane,

London, W.C.2.

768,740 COMPLETE SPECIFICATION

1

SHEET

This drawing is a reproduction of the original on a reduced scale.

NOTE: OPINION CONTAINS TABLE OR OTHER DATA THAT IS NOT VIEWABLE

NOTE: OPINION CONTAINS TABLE OR OTHER DATA THAT IS NOT VIEWABLE

*

Of the District of Massachusetts, sitting by designation

1

Section 132 provides in part: "No amendment shall introduce new matter into the disclosure of the invention."

2

Both the district court and the court of appeals directly addressed only claim 60, finding that claims 60 and 61 were nearly identical. 275 F.Supp. at 964, 399 F.2d at 375

3

In General Instrument this court sharply criticized Hughes' failure to reveal the British Patent of Addition until after conclusion of the district court proceedings, calling it "exceptional oversight" and "ineptitude." 399 F.2d at 380-81

4

In a reply brief, Transitron says it will press its antitrust claim on remand if we reverse the district court's finding that Hughes did not commit fraud

5

Transitron cites Shawkee Mfg. Co. v. Hartford Empire, 322 U.S. 271, 64 S.Ct. 1014, 88 L.Ed. 1269 (1944). That case is inapposite; there the Court ordered that a judgment of infringement be set aside because of fraud by the patentee. The Court also left open the possibility that the infringers might recover money paid under the judgments and damages suffered because of "unlawful use of the patent." The question of restitution of royalties paid by a licensee did not arise

6

Ordinary fraud embraces a material misrepresentation in which the maker has no basis for belief, as well as that which he knows to be false, but it does not include merely negligent misrepresentations, whether "grossly" or "simply" negligent. See Restatement (Second) of Torts § 526; Prosser, Law of Torts § 105, at 685 (4th ed. 1971). Transitron uses the phrase "technical fraud" to describe this latter concept, i. e., a misrepresentation arising from some form of mere carelessness or oversight. The phrase "technical fraud" has been used by different courts to refer to such a wide range of conduct that it is difficult to discern any commonly accepted meaning of the term. Compare Walker v. Food Machinery, 382 U.S. 172, 177, 86 S.Ct. 347, 350, 15 L.Ed.2d 247 (1965), with Norton v. Curtiss, 433 F.2d 779, 793 (C.C.P.A.1970)

7

Transitron cites California Civil Code §§ 1689(b)(1), 1692, and cases under it, and Yorke v. Taylor, 332 Mass. 368, 124 N.E.2d 912 (1955). None of the cited cases involves patent license agreements or analogous contracts. Ordinary contract law does provide for avoidance of contract obligations in cases of mutual mistake or material misrepresentation, even without fraud. Restatement of Contracts § 475. But Transitron's right to rescind and cease payments is not disputed. Restitution of payments already made is allowed where the avoiding party offers to return the consideration received, id., §§ 480, 488, but no such mutual reconveyance would be possible here. The Restatement of Restitution § 24(1) indicates that restitution without reconveyance is allowed where the interest purchased turns out to be nonexistent; but comment (f) to that section points out that the provision does not apply to a patent licensee under a patent found to be invalid, since the interest purchased by a licensee is not a property interest in the patent, but rather the right to immunity from suit for infringement by the licensor

8

This court has on one prior occasion refused to grant affirmative relief there under an antitrust theory against a patentee found not guilty of "legally actionable fraud, as distinguished from mere disabling misconduct." Norton v. Carborundum, 530 F.2d 435, 444-45 (1st Cir. 1976)

9

See 35 U.S.C. § 102(b), which provides in part: "A person shall be entitled to a patent unless (b) the invention was in public use or on sale in this country, more than one year prior to the date of the application for patent in the United States "

10

It is not clear to us whether subject matter which, under British law, is appropriate for a Patent of Addition, is necessarily inappropriate for a claim under a United States patent which corresponds to the original British patent i. e., whether the degree of novelty necessary to qualify for a Patent of Addition would always constitute new matter for purposes of American law. We have been cited no authority on this question, nor are we aware of any such authority having been presented to the district court

11

The district court did conclude that Hughes' prosecution of its patent application demonstrated "a lack of care, clarity, and specificity," 487 F.Supp. at 900, and that these failings by Hughes were sufficient to bar Hughes' counterclaim for back royalties. But as we have indicated, conduct which might bar enforcement of patent rights on equitable grounds does not necessarily give rise to a right to recover royalties

12

This difference of opinion may be less significant than it appears since this court's decision relied heavily on the BPA and accompanying preamble, which was unknown to the district court. But the British claims were essentially identical to the United States claims, as we shall discuss infra. The preamble pointed out their novelty by comparing the new with the old; it did not supply additional factual information about the claims

13

The district court made this finding with reference to Hughes' failure to disclose the BPA to the patent office or the courts, rather than specifically to Transitron

14

The court found negligence, but not more, in Hughes' failure to maintain records sufficient to ensure a timely disclosure of the BPA

15

Pertinent provisions of the Invention Secrecy Act, 35 U.S.C. § 184 are as follows:

"Except when authorized by a license obtained from the Commissioner a person shall not file or cause or authorize to be filed in any foreign country prior to six months after filing in the United States an application for patent in respect of an invention made in this country

"The term 'application' when used in this chapter includes applications and any modifications, amendments, or supplements thereto, or divisions thereof."

35 U.S.C. § 185 provides in pertinent part:

"Notwithstanding any other provisions of law any person, any of his successors, assigns, or legal representatives, shall not receive a United States patent for an invention if that person, or his successors, assigns or legal representatives shall, without procuring the license prescribed in section 184 of this title, have made, or consented to or assisted another's making, application in a foreign country for a patent in respect of the invention. A United States patent issued to such person, his successors, assigns, or legal representatives shall be invalid."

16

Hughes poses a threshold question which we must address before considering the district court's holding: Hughes argues that Transitron may not invoke the Invention Secrecy Act as a basis for recovery because that Act does not provide for a private right of action. Cf. Touche Ross & Co. v. Redington, 442 U.S. 560, 568-69, 99 S.Ct. 2479, 2485-86, 61 L.Ed.2d 82 (1979); Cort v. Ash, 422 U.S. 66, 78, 95 S.Ct. 2080, 2087, 45 L.Ed.2d 26 (1975). Transitron argues that we should infer a private right of action in order to further the purpose of the statute to protect national security by preventing violators of the Act from benefiting from patent rights. Cf. Cannon v. University of Chicago, 441 U.S. 677, 99 S.Ct. 1946, 60 L.Ed.2d 560 (1979); National Railroad Passenger Corp. v. National Association of Railroad Passengers, 414 U.S. 453, 94 S.Ct. 690, 38 L.Ed.2d 646 (1974). We do not think it necessary to decide whether a private right of action is implied in the Invention Secrecy Act since, in our view, Transitron's right of action does not depend on that Act. Transitron's suit is based on its contractual right to restitution upon a showing of fraud, and on the common law tort of fraud. The Invention Secrecy Act is relevant only to establish one of the factual prerequisites for a showing of fraud: known invalidity of Hughes' patent at the time Hughes granted a license. The Act provides that a patent issued to a violator of the Act is invalid not that it may be invalidated by some proceeding to be initiated by the patent office, but that it is invalid. We need not infer a private right of action in order to hold that, upon a showing of knowing violation of the Act, Transitron could rely on the statutory consequence of invalidity of Hughes' patent as a basis for proving fraud. Cf. Shelco v. Dow Chemical Co., 466 F.2d 613, 617-18 (7th Cir.), cert. denied, 409 U.S. 876, 93 S.Ct. 125, 34 L.Ed.2d 129 (1972); General Mills v. Pillsbury, 378 F.2d 666 (8th Cir. 1967); Union Carbide v. Micotron Corp., 375 F.2d 438 (4th Cir. 1967); Minnesota Mining Co. v. Norton Co., 366 F.2d 238 (6th Cir. 1966), cert. denied, 385 U.S. 1005, 87 S.Ct. 711, 17 L.Ed.2d 544 (1967); Beckman Instruments v. Coleman Instruments, 338 F.2d 573 (7th Cir. 1964)

17

The same issue was raised by the defendant in General Instrument, 399 F.2d 373, as an alternative basis for holding the patent unenforceable. Since we held claim 60 to be invalid as new matter, we did not decide whether the patent was invalid under section 185

18

37 C.F.R. § 5.14 provides in part:

"(a) Where there is a corresponding United States application on file the petition for license must identify this application by serial number, filing date, inventor and title, and a copy of the material upon which the license is desired is not required. The subject matter licensed will be measured by the disclosure of the United States application

"(c) Where the application to be filed or transmitted abroad contains matter not disclosed in the United States application or applications, including the case where the combining of two or more United States applications introduces subject matter not disclosed in any of them, a copy of the application as it is to be filed in the foreign country must be furnished with the petition. If, however, all new matter in the foreign application to be filed is readily identifiable, the new matter may be submitted in detail and the remainder by reference to the pertinent United States application or applications."