Shepard v. Century Electric Co. , 220 Mo. App. 1152 ( 1927 )

^* Corpus Juris-Cyc. References: Master and Servant, 39CJ, p. 412, n. 90; p. 1134, n. 42; p. 1151, n. 72; p. 1167, n. 72; p. 1168, n. 78; p. 1222, n. 87; p. 1234, n. 79; Trial, 38Cyc, p. 1543, n. 69. This is an action to recover damages for personal injuries received by the plaintiff while in the employ of defendant at its manufacturing plant in the city of St. Louis. The cause was tried before the court, and a jury, resulting in a verdict and judgment in favor of plaintiff for $1500, from which judgment the defendant appeals.

Plaintiff sustained the injuries for which he sues while working at a machine known as a cutter or trimmer. The machine consisted of two solid iron shafts, one above the other, and rested on a pedestal to which it was bolted. It was provided with a foot treadle and hand lever. The operator stood in front of the machine. The machine was used for cutting or trimming metal cups, called field shells. The upper shaft was provided with a circular cutter. The left end of the lower shaft was provided with an arbor, upon which the cups or field shells to be cut or trimmed were placed. The operator, after placing a shell on the arbor, pressed down on the foot treadle or hand lever and thus brought the upper shaft down to a point where the circular cutter would come in contact with the shell. The machine was operated by electrical power. The shafts revolved continuously. The shells were placed on the arbor and removed therefrom by the operator with his left hand. At the time plaintiff was injured he was attempting to remove a shell from the arbor after the shell was trimmed. There remained attached to the shell after it was trimmed a piece of scrap metal which the cutter had failed to cut entirely from the shell. In so attempting to remove the shell, plaintiff's index finger was caught by the piece of scrap metal so remaining attached to the shell, and was thereby drawn between the revolving shafts, and injured.

The petition assigns negligence on the part of defendant in the following respects: (1) In negligently failing to safely and securely guard the machine; (2) in negligently failing to provide plaintiff with a suitable appliance with which to knock, push, or take the field shells from the arbor; (3) in negligently ordering plaintiff to remove the field shells from the end of the revolving shaft with his fingers; and (4) in negligently failing to warn the plaintiff of the danger of using his fingers to remove the field shells from the revolving shaft.

The answer is a general denial, coupled with pleas of assumption of the risk and contributory negligence.

Plaintiff testified that on or about the 6th day of November, 1923, he was in the employ of the defendant operating a certain machine known as a punch press, and that on said day the defendant ordered and directed plaintiff to operate the machine known as a cutter, or trimmer, for the purpose of trimming the edges of certain metal cups, known as field shells; that he had not previously operated this machine; that his foreman, or set-up man, from whom he received his orders, directed him to operate this machine, and also showed him how to cut or trim these field shells and how to take them off of the machine; that the foreman took these field shells off of the machine after they had been cut, with the index finger and thumb of his left hand, while the shafts and the field shells on the arbor of the lower shaft revolved; that in obedience to the orders and directions so given him, plaintiff proceeded to operate said machine; that during the time that he operated the same there were three or four of the shells from which the scrap metal had not been entirely cut off, leaving a piece of scrap metal attached to the shell; that at the time of receiving his injury the cutter of said machine failed to cut off all of the scrap metal, so that about three inches of the scrap metal still remained attached to the shell, there being about a quarter of an inch that had been uncut at the place, where said scrap metal joined the shell; that while said machine was in operation, and while plaintiff attempted to remove the shell from the lower shaft, with the index finger and thumb of his left hand, as he had been ordered and instructed to do, the piece of scrap metal so remaining attached to the shell caught the index finger of his left hand, and caused it to be drawn between the two revolving shafts, which were about one-quarter of an inch apart, and thereby caused the finger to be severely injured; that the circular knife or cutter was about two and one-half or three inches in diameter; that the shell was about three and one-half or four inches deep and about three and one-half or four inches in diameter; that the shell was placed over the arbor on the end of the lower shaft; that the thickness of the metal of the shell was about one-sixteenth of an inch; that plaintiff was not given any appliance with which to knock or remove the shell from the arbor after it had been cut; that there were no guards upon the machine, except a piece of metal resembling the sole of a shoe, which was placed above and in front of the circular knife, or cutter, on the upper shaft, for the purpose of keeping oil from splashing in the face of the operator.

G.A. Ross, an expert master mechanic, testified that he examined the machine in question, and that there was no guard on it to prevent injury or accident to the operator, such as plaintiff sustained, and that it was possible to safely and securely guard the machine so as to prevent injury to the operator in taking off the shells without interfering with the practical operation of the machine; that the way to guard said machine would be to supply a knockout, that is, the lower shaft could be made hollow and a bolt, known as a knockout bolt, could be inserted therein, so that it would automatically knock the shell from the arbor on the end of the lower shaft, when the shell had been cut; that in order to equip the machine with a knockout device, it would be necessary to take the machine to pieces but that their construction would not amount to much.

On the part of the defendant, the evidence tended to show that there was a protection in the nature of a guard to keep any one from coming in contact with the belt on the machine, and that other parts were so concealed in the machine that there was no danger of any one coming in contact with them; that it was a Bliss machine and was exactly in the condition in which that type of machine is advertised in the catalogues and used in tin shops and places where they manufactured articles of sheet metal, and was in general use for that purpose; that a further guard of any kind would interfere with the practical operation of the machine, and that there was no necessity for it; that the operator could take the shell off by simply holding his hand underneath the shell; that it fits very loosely on the lower shaft so that it would drop right off just as soon as the hand is put there; that the machine would cut different sized shells; that if the shells cut on the machine varied in length, it would not be practical to have a knockout, for then a separate knockout would have to be arranged for each particular shell, and the adjustment of the entire machine would have to be changed; that to equip the machine with a knockout, it would be necessary to remove the lower shaft and put another in its stead, the lower shaft on the machine being too small to be hollowed out; that the sole purpose of the machine is simply to take the place of the tinner's shears.

Defendant assigns error here (1) upon the refusal of its demurrer to the evidence, (2) upon the giving of plaintiff's instruction No. 1, and (3) upon the giving of plaintiff's instruction No. 2.

The evidence, viewed in the light most favorable to plaintiff, and allowing every inference which a fair-minded jury of ordinary intelligence might legitimately draw therefrom, was sufficient to take the case to the jury. [Burtch v. Wabash Ry. Co. (Mo.), 236 S.W. 338; Burton v. Holman, 288 Mo. 70, 231 S.W. 630; Keppler v. Wells (Mo.), 238 S.W. 425; Anderson v. White (Mo. App.),235 S.W. 834; W.J. Howey Co. v. Cole (Mo. App.), 269 S.W. 955; Karagas v. Union Pacific R. Co. (Mo. App.), 232 S.W. 1100; Moffatt v. Link (Mo. App.), 229 S.W. 836.]

Plaintiff's instruction No. 1 directs a verdict for plaintiff if the jury find that defendant ordered and directed plaintiff to use his fingers to remove the field shells mentioned in the evidence from the lower shaft or roll of the machine while the shafts or rolls revolved, after the shells had been trimmed or cut, that in obedience to such order and direction plaintiff attempted to remove the field shell from the shaft or roll of the machine, that while so engaged plaintiff's finger was caught by a piece of scrap metal remaining attached to the field shell, that plaintiff's finger was thereby drawn between the revolving shafts or rolls and injured, that before defendant gave plaintiff said order and direction the defendant knew or by the exercise of ordinary care could have known that pieces of scrap metal were likely to remain upon some of the field shells, after they had been trimmed or cut, and that the defendant knew or by the exercise of ordinary care could have known that it was not reasonably safe for plaintiff to use his fingers to remove the field shells from the revolving shaft or roll, and that in so doing his fingers were likely to be caught by such piece of scrap metal and drawn between said revolving shafts or rolls and injured.

The defendant urges in support of this assignment that the instruction assumes that pieces of scrap metal were likely to remain on the shells after they were trimmed, and that it was not reasonably safe for plaintiff to remove the shells with his fingers. It has always been held error to assume in an instruction facts in issue. The instruction here unquestionably assumes such facts. An instruction almost identical with this instruction was held erroneous by this court in Gebhardt v. American Car Foundry Co., decided at the present term. So, too, a similar instruction was held erroneous by this court in Rey v. Fayette R. Plumb, Inc. (Mo. App.), 287 S.W. 783. Plaintiff urges in argument that the instruction does not assume that the pieces of scrap metal were likely to remain attached to the shells after they had been trimmed, and that it was not reasonably safe for plaintiff to remove the shells with his fingers, since the jury could not have found defendant knew such facts unless they found the facts to exist. This is beside the question. The vice of the instruction is that it treats these facts as settled and established, and does not leave the jury free to find whether or not these facts existed. In effect it tells the jury that these facts do exist, and that the jury are concerned only with the question as to whether or not the defendant had knowledge, actual or constructive, of the existence of these facts. In other words, the instruction assumes the existence of these facts.

Plaintiff's instruction No. 2 directs a verdict for plaintiff upon a finding by the jury that the machine at which plaintiff was working was dangerous to plaintiff while he was engaged in his ordinary duties, that it was possible for defendant to safely and securely guard the machine without interfering with the practical operation thereof, that defendant failed to safely and securely guard the machine, and that as a direct result of such failure plaintiff was injured.

Defendant bases its assignment of error upon the giving of this instruction, on the ground that the evidence is wholly insufficient to support a finding by the jury that the machine could have been safely and securely guarded, within the meaning of the statute. The statute (Sec. 6786, R.S. 1919) provides as follows:

"The belting, shafting, machines, machinery, gearing and drums in all manufacturing, mechanical and other establishments in this State, when so placed as to be dangerous to persons employed therein or thereabout while engaged in their ordinary duties, shall be safely and securely guarded when possible; if not possible, then notice of its danger shall be conspicuously posted in such establishments."

In support of his contention that the machine could have been safely and securely guarded within the meaning of the statute, plaintiff relies on the testimony of his expert witness to the effect that a knockout bolt could have been placed in the lower shaft which would have automatically knocked the shells from the arbor, so as to relieve plaintiff of the necessity of removing the shells with his fingers. We can see in this device no semblance of a guard. To guard a machine as contemplated by the statute is to place some device in the nature of a shield or defense between the employee and danger, so as to protect him from injury while in the performance of some service required of him. It is not to make such a change in the structure of the machine, or to attach such a device thereto, as will relieve the employee from the performance of the service required of him. [Bessler v. Laughlin,168 Ind. 38; McIntosh v. Saw Mill Phoenix, 49 Wash, 152.] In this case the plaintiff was required, in the performance of his duty, to place the field shells on the shaft and remove them therefrom with his fingers. Any contrivance which would have protected or shielded him from injury in the performance of that service would constitute a guard within the contemplation of the statute, but a change in the structure of the machine, or the attaching thereto of a device, so as to relieve the plaintiff from the performance of that service, is not in any sense a guarding of the machine. The instruction complained of imposes upon the defendant the duty as a matter of law to so change the structure of its machine, or attach thereto such device, as to relieve plaintiff from the performance of the service of removing the shells from the arbor with his fingers, if it was possible to do so without interfering with the practical operation of the machine. Such an interpretation of the statute would make it the duty of the manufacturer in all cases to so construct and equip its machines and machinery as to insure the safety of its employees when possible to do so without interfering with the practical operation thereof, or, in other words, to use only the safest machines and machinery that it is possible for human skill to devise. If the statute were intended to be so read, manifestly it would have been so written.

Plaintiff relies on Simon v. St. Louis Brass Mfg. Co. (Mo.),250 S.W. 74, and Stovall v. F. Burkart Mfg. Co. (Mo. App.), 261 S.W. 936, in support of his view.

In the Simon case the operator of a stamping machine was required to place material on the lower die of the machine with his hand underneath the upper die, which descended and ascended automatically while the machine was in operation, and it was held that a device to warn the operator that the upper die was descending and to push his hand from underneath the die if he did not remove it himself in time to avoid contact, was a guard within the meaning of the statute. It will be observed that the device in that case did not relieve the operator from performing the service of placing the material between the dies with his hand, but merely shielded and protected him in the performance of that service.

In the Stovall case, while plaintiff was in the performance of his duties, a belt slipped from an unguarded pulley which caused another belt to slip from a larger pulley, and plaintiff was thereby drawn into the machinery and injured. There was only one flange on the small pulley, which was on the inside, and for that reason the belt slipped off the pulley. It was shown that it was entirely practical to put a flange on the outside of the pulley, and that if that had been done the belt would have been prevented from slipping off of the pulley. It was held that such flange was a guard within the meaning of the statute.

It is obvious that these cases afford no support for plaintiff's view.

The Commissioner recommends that the judgment of the circuit court be reversed and the cause remanded.