Sharp Engineering v. Luis , 2010 Tex. App. LEXIS 6445 ( 2010 )

OPINION

WILLIAM J. BOYCE, Justice.

Appellants Sharp Engineering and Pra-deep Shah appeal from the denial of them motion to dismiss the underlying negligence suit. Sharp Engineering and Shah contend that dismissal is mandated because appellees Sergio R. Luis and Judith Yanet Delgado, individually and as next friend of Sergio Luis Delgado, Jackeline Luis, and Johnatan Luis did not file the statutorily required certificate of merit with their original petition. See Tex. Civ. Prac. & Rem.Code Ann. § 150.002(a) (Vernon 2005).¹ We reverse and remand.

Background

Appellee Sergio R. Luis, a carpenter, was injured when the roof of a house he was framing for Trendmaker Homes, Inc. collapsed. Appellees initially sued Trend-maker Homes on June 8, 2007. The suit settled for a confidential amount. Appel-lees then filed suit against Sharp Engineering and Shah on February 19, 2009, alleging that Sharp Engineering and Shah were negligent because they “failed to follow basic engineering princip[les] in the review, approval and design of the construction drawings, roof framing plan and the swoop cornice.”

It is undisputed that Sharp Engineering and Shah are licensed or registered professionals and that appellees’ claims are subject to Texas Civil Practice and Remedies Code Chapter 150, entitled “Licensed or Registered Professionals.” See id. §§ 150.001-150.003 (Vernon 2005). Under Chapter 150, appellees were required to file a certificate of merit with their “complaint.” See id. § 150.002(a).

The certificate of merit must “set forth specifically at least one negligent act, error, or omission claimed to exist and the factual basis for each such claim.” Id. The certificate need not state the applicable standard of care. Benchmark Eng’g Corp. v. Sam Houston Race Park, 316 S.W.3d 41,44-47 (Tex.App.-Houston [14th Dist.] 2010, no pet.). The certificate of merit must be signed by “a third-party licensed architect, registered professional land surveyor, or licensed professional engineer competent to testify, holding the same professional license as, and practicing in the same area of practice as the defendant[.]” Id. The “third-party professional engineer, registered professional land surveyor, or licensed architect” also must be “licensed in [Texas] and actively engaged in the practice of architecture, surveying, or engineering.” Id. Section 150.002(d) provides for dismissal of a suit that does not include the certificate of merit required under section 150.002(a). See id. § 150.002(d).

Appellees did not file a certificate of merit with their original petition. Sharp Engineering and Shah filed a motion to dismiss on March 23, 2009, asserting that the trial court should dismiss appellees’ claims because appellees failed to file a certificate of merit with their original petition. Appellees filed a certificate of merit contemporaneously with their First Amended Original Petition on April 13, 2009. Sharp Engineering and Shah filed an amended motion to dismiss on May 4, 2009. The trial court denied Sharp Engineering’s and Shah’s amended motion to dismiss in an order signed on July 7, 2009. Sharp Engineering and Shah appeal from this order. See id. § 150.002(e).

Analysis

Sharp Engineering and Shah argue that the trial court erred in denying their motion to dismiss under section 150.002(d) because appellees did not initially satisfy section 150.002(a)’s requirement to file a certificate of merit. Appellees argue that section 150.002(a) does not limit them to filing a certificate of merit with their original petition; according to appellees, section 150.002(a) requires only that they file a certificate of merit with a “complaint” and they did so when they included a certificate with their first amended petition. Appellees do not contend that any exception to the certificate requirement applies here. See id. § 150.002(b).

I. Construction of Section 150.002

We review matters of statutory construction de novo. State v. Shumake, 199 S.W.3d 279, 284 (Tex.2006). In construing a statute, our primary objective is to determine and give effect to the legislature’s intent. Tex. Dep’t of Transp. v. Needham, 82 S.W.3d 314, 318 (Tex.2002). We look at the statute’s plain and common meaning because we presume the legislature intended the plain meaning of its words. Nat’l Liab. & Fire Ins. Co. v. Allen, 15 S.W.3d 525, 527 (Tex.2000). We presume that the legislature intended the entire statute to be effective. See Tex. Gov’t Code Ann. § 311.021 (Vernon 2005). “ ‘[I]t is settled that every word in a statute is presumed to have been used for a purpose; and a cardinal rule of statutory construction is that each sentence, clause and word is to be given effect if reasonable and possible.’ ” Tex. Workers’ Comp. Ins. Fund v. Del Indus., Inc., 35 S.W.3d 591, 593 (Tex.2000) (quoting Perkins v. State, 367 S.W.2d 140, 146 (Tex.1963)). Courts should not adopt a construction that renders statutory provisions meaningless. Fleming Foods of Tex. v. Rylander, 6 S.W.3d 278, 284 (Tex.1999).

Sharp Engineering and Shah argue that section 150.002 “requires a claimant to file his Certificate at the time he first files his complaint against a design professional.” At the time appellees filed their suit against Sharp Engineering and Shah on February 19, 2009, section 150.002, entitled “Certificate of Merit” provided in relevant part as follows:

(a) In any action or arbitration proceeding for damages arising out of the provision of professional services by a licensed or registered professional, the plaintiff shall be required to file with the complaint an affidavit of a third-party licensed architect, registered professional land surveyor, or licensed professional engineer competent to testify, holding the same professional license as, and practicing in the same area of practice as the defendant, which affidavit shall set forth specifically at least one negligent act, error, or omission claimed to exist and the factual basis for each such claim. The third-party professional engineer, registered professional land surveyor, or licensed architect shall be licensed in this state and actively engaged in the practice of architecture, surveying, or engineering.

(b) The contemporaneous filing requirement of Subsection (a) shall not apply to any case in which the period of limitation will expire within 10 days of the date of filing and, because of such time constraints, the plaintiff has alleged that an affidavit of a third-party licensed architect, registered professional land surveyor, or professional engineer could not be prepared. In such cases, the plaintiff shall have 30 days after the filing of the complaint to supplement the pleadings with the affidavit. The trial court may, on motion, after hearing and for good cause, extend such time as it shall determine justice requires.

(c) The defendant shall not be required to file an answer to the complaint and affidavit until 30 days after the filing of such affidavit.

(d) The plaintiffs failure to file the affidavit in accordance with Subsection (a) or (b) shall result in dismissal of the complaint against the defendant. This dismissal may be with prejudice.

See Act of May 18, 2005, 79th Leg., R.S., ch. 208, § 2, 2005 Tex. Gen. Laws 369, 370 (amended 2009) (current version at Tex. Civ. Prac. & Rem.Code Ann. § 150.002(a)-(e)(Vernon Supp. 2009)).

Appellees argue that a plaintiff need not include a certificate of merit with the first-filed complaint alleging negligence by a professional because the legislature did not include the words “original” or “first-filed” before the word “complaint” in section 150.002(a). Under appellees’ interpretation, section 150.002(a) allows a plaintiff to file a certificate of merit with an amended “complaint” in response to a motion to dismiss an earlier complaint that lacks the required certificate.

Appellees’ interpretation cannot prevail because it impermissibly renders section 150.002(b) meaningless. Section 150.002(b) provides that a plaintiff asserting a negligence claim against a professional can obtain an extension of time to file a certificate of merit if (1) the statute of limitations will expire within 10 days of the filing of suit; and (2) this time constraint precludes preparation of the necessary certificate for filing with the suit. Tex. Civ. Prac. & Rem.Code Ann. § 150.002(b). Under these circumstances, the plaintiff must file its certificate within 30 days of filing its original complaint. Id. “The trial court may, on motion, after hearing and for good cause, extend such time as it shall determine justice requires.” Id.

If the absence of the section 150.002(a) certificate could be cured by attaching it to an amended complaint asserting the same negligence claim against the same professional, then section 150.002(b) would serve no purpose. A plaintiff faced with a looming statute of limitations deadline could negate section 150.002(b)’s 30-day extension procedure (along with the necessity of any subsequent motion and hearing) merely by filing an amended complaint and a certificate more than 30 days after suit was first filed. We cannot endorse a statutory interpretation that negates section 150.002(b) in this manner.

Requiring inclusion of the certificate with the first-filed “complaint” comports with this court’s prior discussion of section 150.002(a). See Benchmark Eng’g Corp., 316 S.W.3d at 42-44 (“[Pjlaintiff attached a certificate of merit to its original petition as required under section 150.002(a).”). This interpretation also comports with the analysis in Ashkar Engineering Corporation v. Gulf Chemical & Metallurgical Corporation, No. 01-09-00855-CV, 2010 WL 376076, at *2-*3 (Tex.App.-Houston [1st Dist.] Feb. 4, 2010, no pet.). In Ashkar Engineering, Gulf Chemical originally filed suit against Miner-Dederiek. Id. at *1. Gulf Chemical added Ashkar Engineering, a design professional, as a defendant in its First Amended Petition asserting claims for negligence, breach of contract, and breach of implied warranty against Ashkar Engineering. Id. at *1, *4. Gulf Chemical did not file a certificate of merit with its first amended petition; it later filed a certificate of merit with its third amended petition. Id. at *1. The court held that Gulf Chemical failed to timely file a certificate of merit. Id. at *3.²

We hold that section 150.002 requires a plaintiff to file a certificate of merit with the first-filed complaint asserting a negligence claim against a professional.

II. Propriety of Trial Court’s Ruling on Motion to Dismiss

We review a trial court’s order granting or denying a defendant’s motion to dismiss for abuse of discretion. See Am. Transitional Care Ctrs. of Tex., Inc. v. Palacios, 46 S.W.3d 873, 877-78 (Tex.2001); Rittmer v. Garza, 65 S.W.3d 718, 721 (Tex.App.Houston [14th Dist.] 2001, no pet.). A trial court abuses its discretion when it acts in an unreasonable and arbitrary manner, or when it acts without reference to any guiding rules or principles. Walker v. Gutierrez, 111 S.W.3d 56, 62 (Tex.2003). A trial court will be deemed to have acted arbitrarily and unreasonably if the trial court could have reached only one decision, yet reached a different one. Teixeira v. Hall, 107 S.W.3d 805, 807 (Tex.App.-Texarkana 2003, no pet.). To that end, a trial court abuses its discretion when it fails to analyze or apply the law correctly. In re Sw. Bell Tel. Co., 226 S.W.3d 400, 403 (Tex.2007) (citing In re Kuntz, 124 S.W.3d 179, 181 (Tex.2003)).

Having determined that section 150.002(a) requires a plaintiff to file a certificate of merit with the first-filed complaint asserting negligence by a professional, we must determine if appellees complied with this requirement. Appel-lees filed suit against Sharp Engineering and Shah on February 19, 2009, alleging that Sharp Engineering and Shah were negligent because they “failed to follow basic engineering principles] in the review, approval and design of the construction drawings, roof framing plan and the swoop cornice.” Appellees did not file a certificate of merit with their original petition. Appellees subsequently filed a certificate of merit with their First Amended Original Petition. Appellees do not contend that the exception set forth in subsection (b) is applicable to their case. Therefore, appellees failed to timely file a certificate of merit as required by section 150.002(a).

Subsection (d) requires “dismissal of the complaint against the defendant” if the plaintiff fails to file a certificate of merit in accordance with subsection (a) or (b). Therefore, the trial court abused its discretion in denying appellants’ motion to dismiss. See id. Section 150.002(d) allows the trial court to dismiss with or without prejudice. Tex. Civ. Prac. & Rem.Code Ann. § 150.002(d).

We sustain Sharp Engineering’s and Shah’s sole issue.

Conclusion

We reverse the trial court’s July 7, 2009 order denying appellants’ motion to dismiss and remand this case to the trial court for a determination of whether such dismissal should be with or without prejudice to refiling.

SULLIVAN, J., concurring.

1 . The Eighty-First Texas Legislature amended section 150.002, effective as of September 1, 2009. See Act of June 19, 2009, 81st Leg., R.S., ch. 789, §§ 3-4, Tex. Gen. Laws 1989-1990 (effective Sept. 1, 2009). Because this suit was filed on March 23, 2009, these amendments do not apply to this case. See id. All citations to the statute in this opinion are to the version in effect prior to the 2009 amendments.

2 . The parties subsequently filed a joint motion to dismiss Ashkar Engineering's appeal and Gulf Chemical's motion for rehearing because they “settled their dispute in the trial court” and "agree to a voluntary dismissal.” Ashkar Eng’g Corp. v. Gulf Chem. & Metallurgical Corp., No. 01-09-00855-CV, 2010 WL 1509287, at *1 (Tex.App.-Houston [1st Dist.] April 15, 2010, no pet.). The parties also requested that the court withdraw its February 4, 2010 opinion and judgment. Id. The court dismissed the appeal and withdrew its February 4, 2010 judgment and March 22, 2010 order denying Gulf Chemical’s motion for rehearing. Id. The court declined to withdraw its February 4, 2010 opinion. Id.