Simonetta v. Viad Corp. , 165 Wash. 2d 341 ( 2008 )

C. Johnson, J.

¶1 — This case presents the issue of whether under the common law a manufacturer can be held liable for failure to warn of the hazards of another manufacturer’s product. Joseph Simonetta claims his lung cancer was the result of exposure to asbestos while employed by the United States Navy. Simonetta performed maintenance on an evaporator, a device that desalinates seawater, manufactured by Griscom Russell, a company of which Viad Corporation is the purported successor. After the evaporator was shipped from the Griscom Russell plant in 1941 or 1942, it was insulated with asbestos products manufactured by another company and installed by the navy or another entity. The exposure contributing to the lung cancer allegedly occurred in 1958 or 1959 when, during maintenance work on the evaporator, asbestos insulation had to be removed from the equipment. While the trial court granted summary judgment for Viad, the Court of Appeals reversed, holding that under common law negligence and strict product liability, Griscom Russell had a duty to warn about the dangers of respirable asbestos released during the use of its product. We reverse the Court of Appeals.

FACTUAL AND PROCEDURAL HISTORY

¶2 Joseph Simonetta served in the United States Navy from 1954 to 1974. From 1958 to 1959, he served as a fireman and machinist mate aboard the USS Saufley. Clerk’s Papers (CP) at 191. He performed maintenance on an evaporator, also called a distilling plant (a device that converts seawater to freshwater), manufactured by Viad’s purported predecessor, Griscom Russell.¹ After the evaporator was shipped from the manufacturer’s plant, in 1941 or 1942, while the USS Saufley was under construction, it was insulated with asbestos mud and cloth products manufactured by another company and installed by the navy or another entity. To service the evaporator, Simonetta claims he would “pry or hack away” the asbestos insulation with a hammer and then reinsulate the machine after he was done. CP at 197-98.

¶3 Simonetta was diagnosed with lung cancer in 2000 and 2002. His medical expert testified that there was a causal link between the cancer and Simonetta’s exposure to asbestos while in the navy. Simonetta filed negligence and strict liability claims against Viad for failure to warn of the hazards of asbestos exposure. He did not know the identity of the company that manufactured or installed the insulation on the evaporator.

¶4 The trial court denied Viad’s motion for summary judgment as to corporate successor liability and exposure to asbestos-containing gaskets due to genuine issues of material fact. The trial court granted Viad’s motion for summary judgment on the issue of duty to warn, reasoning that though Viad knew or reasonably should have known that its product would be insulated with asbestos-containing material, the evaporator itself did not produce the injury. Simonetta voluntarily dismissed all remaining claims and appealed.² CP at 1374-75.

¶5 The Court of Appeals, Division One, reversed the grant of summary judgment. Simonetta v. Viad Corp., 137 Wn. App. 15, 151 P.3d 1019 (2007), linked with Braaten v. Saberhagen Holdings, 137 Wn. App. 32, 151 P.3d 1010 (2007). On the common law negligence claim, the court held that Viad had a duty to warn of the risk of asbestos exposure with respect to servicing the evaporator. It found that Viad was aware that exposure would occur during the use and maintenance of its product because the evaporator needed insulation to operate properly, the navy used asbestos insulation, and workers would have to disturb the asbestos insulation to perform maintenance. The court determined that “[w]hile this duty has not traditionally applied to products manufactured by another, this present case represents a set of facts that compels another logical extension of the common law.” Simonetta, 137 Wn. App. at 25.

¶6 Regarding strict liability, the court found that although the evaporator left the factory without insulation, it was defective. The court based its reasoning on the conclusion that the evaporator had to be encapsulated in insulation for use, yet it included no warning about the risk of exposure to a known danger that would result from disturbing the insulation during ordinary use and maintenance. Accordingly, the court held that “when a product requires the use of another product and the two together cause a release of a hazardous substance, the manufacturer has a duty to warn about the inherent dangers.” Simonetta, 137 Wn. App. at 31.

¶7 The Court of Appeals denied Viad’s motion for reconsideration and/or clarification. We granted Viad’s petition for review. Simonetta v. Saberhagen Holdings, 162 Wn.2d 1011 (2008).

ISSUE

Whether Viad may be liable for failure to warn of the dangers of asbestos exposure resulting from another manufacturer’s insulation under common law negligence or common law strict liability.

ANALYSIS

¶8 Because Simonetta’s claimed asbestos exposure occurred prior to the 1981 enactment of the Washington product liability act (WPLA), chapter 7.72 RCW, we analyze the common law of strict liability and negligence.

Negligence

¶9 Under the law of negligence, a defendant’s duty is to exercise ordinary care. A manufacturer’s duty of ordinary care includes a duty to warn of hazards involved in the use of a product that are or should be known to the manufacturer. Restatement (Second) of Torts § 388 (1965) (§ 388).³ Thus, in a negligence action alleging failure to warn, the focus is on the conduct of the manufacturer. The only issue pertaining to negligence raised on appeal is whether Viad owed a duty of care to Simonetta. Whether such a duty is owed is a question of law that generally depends on mixed considerations of logic, common sense, justice, policy, and precedent.⁴

¶10 Simonetta claims that Viad breached its duty to warn him of the risks from the intended use of the evaporator, which included routine and necessary maintenance and which caused his physical condition. He argues that neither § 388 nor Washington case law requires that physical harm be inflicted by the product itself in order for a duty to warn to arise. In support, he emphasizes language in § 388 that the physical harm must be caused by the use of the chattel in the manner for which it is intended and by a person for whose use it is supplied. Thus, Simonetta argues that the relevant inquiry is whether the manufacturer of a potentially dangerous product must warn of the hazards associated with the product’s use — the hazard here being the risks arising from the expected use of the evaporator in conjunction with asbestos insulation. He asserts that he introduced evidence on every element of Viad’s liability for failure to warn under § 388. He claims that Viad’s own expert witness testified that the evaporator required insulation to function properly, that such insulation contained asbestos, that the company knew or should have known of the use, and that the insulation would be disturbed during normal maintenance.

¶11 Viad argues that it was not negligent because it did not have a duty to warn of the dangers of asbestos — a product it did not manufacture, supply, or sell. The Court of Appeals disposed of this argument, finding that the danger of asbestos exposure was inherent in the use of the evaporator because the evaporator was built with the knowledge that insulation was required for proper operation and that workers would need to invade the insulation for maintenance. However, a careful review of case law interpreting failure to warn cases under § 388 does not support the Court of Appeals’ conclusion.

¶12 In the following cases, the claims for § 388 failure to warn were posited only against parties in the chain of distribution of the product. See DuVon v. Rockwell Int'l, 116 Wn.2d 749, 807 P.2d 876 (1991) (holding plaintiff had claim under § 388 for injuries resulting from an exhauster supplied by an alleged non-manufacturer and despite non-manufacturer’s lack of intent to introduce the exhauster into the stream of commerce); Reichelt v. Johns-Manville Corp., 107 Wn.2d 761, 772, 733 P.2d 530 (1987) (referencing § 388 as establishing the duty of ordinary care as manufacturer’s duty to warn of hazards involved in the use of its product, but dismissing as time-barred plaintiff’s negligence claim in asbestos exposure case); Lockwood v. AC&S, Inc., 44 Wn. App. 330, 722 P.2d 826 (1986) (considering evidentiary issues in context of § 388 claim against asbestos manufacturer where plaintiff alleged negligent failure to warn of dangers inherent in use of manufacturer’s asbestos products), aff’d, 109 Wn.2d 235, 744 P.2d 605 (1987); Baughn v. Honda Motor Co., 107 Wn.2d 127, 137, 727 P.2d 655 (1986) (citing § 388 as establishing duty of ordinary care, which included duty to warn of hazards involved in use of a product that are or should be known to the manufacturer, and holding it was not error to find manufacturer Honda satisfied its duty to warn under laws of negligence and strict liability); Mele v. Turner, 106 Wn.2d 73, 720 P.2d 787 (1986) (rejecting plaintiff’s negligence claim based on failure to warn under § 388, where the alleged dangerous condition of defendant’s lawn mower supplied for plaintiff’s use was both obvious and known to plaintiff); Zamora v. Mobil Oil Corp., 104 Wn.2d 199, 704 P.2d 584 (1985) (citing to § 388(a) in holding that seller of bulk propane had no duty to warn of hazards of propane it never possessed or handled because hazards were obvious to the retailer of the propane, who held the duty to warn the ultimate consumer); Novak v. Piggly Wiggly Puget Sound Co., 22 Wn. App. 407, 591 P.2d 791 (1979) (finding as a matter of law manufacturer of BB gun provided sufficient warnings of the hazards of the gun to preclude liability under both strict liability and § 388 negligence theories); Little v. PPG Indus., Inc., 19 Wn. App. 812, 579 P.2d 940 (1978) (noting that the objective of the rule of strict liability with respect to dangerous products focuses on adequacy of the warning given by supplier, or necessity of the warning, while negligence under § 388 focuses on supplier’s conduct), aff’d, 92 Wn.2d 118, 594 P.2d 911 (1979); Ewer v. Goodyear Tire & Rubber Co., 4 Wn. App. 152, 480 P.2d 260 (1971) (finding that where manufacturer Goodyear provided no warning of the hazard of “bead breaking” in its tires during mounting procedures, there was a factual issue as to whether the danger was sufficiently obvious such that Goodyear had no duty to warn); Callahan v. Keystone Fireworks Mfg. Co., 72 Wn.2d 823, 826, 435 P.2d 626 (1967) (finding sufficient evidence of negligent duty to warn to uphold jury verdict against manufacturer of defective bomb included in a fireworks show that caused plaintiff injury); Fleming v. Stoddard Wendle Motor Co., 70 Wn.2d 465, 467-68, 423 P.2d 926 (1967) (adopting §388, regarding duty to disclose and holding individual seller who modified transmission safety switch on truck liable for failure to warn of potential hazard, though he traded the truck “ ‘as is’ ”); Bock v. Truck & Tractor, Inc., 18 Wn.2d 458, 469, 139 P.2d 706 (1943) (citing Restatement of Torts § 388 (1934) in holding dealer in secondhand vehicles who undertakes to refurbish such vehicles for later sale has same duty as manufacturer to exercise reasonable care to ensure vehicle’s safe condition);

Belcher v. Lentz Hardware Co., 13 Wn.2d 523, 125 P.2d 648 (1942) (examining Restatement of Torts § 388 (1934) in determining personal injury plaintiff presented insufficient evidence of defect in weed burner sold by defendant retailer to sustain judgment against retailer).

¶13 In all of these cases, the plaintiffs claimed § 388 failure to warn against the alleged hazardous product’s manufacturer, seller, or supplier. The language of § 388 discusses the supplier’s responsibility to warn of the dangers of a product. A “supplier” is defined in the Restatement as “any person who for any purpose or in any manner gives possession of a chattel for another’s use . . . without disclosing his knowledge that the chattel is dangerous for the use for which it is supplied or for which it is permitted to be used.” Restatement (Second) of Torts § 388 cmt. c. Suppliers include vendors, lessors, and donors. The cases discussed above are consistent with the limitation established under the Restatement.

¶14 The one case the Court of Appeals discussed in its negligence analysis was Sepulveda-Esquivel v. Central Machine Works, Inc., 120 Wn. App. 12, 84 P.3d 895 (2004). In Sepulveda, a case governed by the WPLA, the Court of Appeals, Division Two, examined liability where a person was injured when a load fell from a hook that had been modified by his employer, forged by one company, and supplied by another. The court considered the entire assembly, which included the component hook, as a unit, and found that the hook itself was not defective; thus, the defendants who forged and supplied the hook were not liable. Viad argued that in the present case, as in Sepulveda, the danger was in the finished assembly and arose from the asbestos insulation provided by another, though both evaporator and insulation functioned as intended. We interpret Sepulveda to align the WPLA with the common law limitations in that component sellers are not generally liable when the component itself is not defective.⁵

¶15 Washington cases discussing and analyzing § 388 liability generally limit the analysis of the duty to warn of the hazards of a product to those in the chain of distribution of the product, such as manufacturers, suppliers, or sellers. Therefore, we find little to no support under our case law for extending the duty to warn to another manufacturer’s product.

¶16 Case law from other jurisdictions similarly limits the duty to warn in negligence cases to those in the chain of distribution of the hazardous product. See, e.g., Cleary v. Reliance Fuel Oil Assocs., 17 A.D.3d 503, 793 N.Y.S.2d 468 (2005) (finding manufacturer of water heater had no duty to warn of dangers of misplacing an aquastat it did not manufacture in its product); In re Deep Vein Thrombosis, 356 F. Supp. 2d 1055, 1067-68 (N.D. Cal. 2005) (finding Boeing, a manufacturer of commercial aircrafts, had no duty to warn the airlines about defective seats, manufactured and installed by another, which could result in deep vein thrombosis in passengers, i.e., “[t]he court can find no case law that supports the idea that a manufacturer, after selling a completed product to a purchaser, remains under a duty to warn the purchaser of potentially defective additional pieces of equipment that the purchaser may or may not use to complement the product bought from the manufacturer”); Blackwell v. Phelps Dodge Corp., 157 Cal. App. 3d 372, 203 Cal. Rptr. 706 (1984) (holding where sulfuric acid spewed out of tank and injured plaintiff, though defendant supplier of sulfuric acid knew type of tank used to transport sulfuric acid, supplier did not have duty to warn under § 388 of danger of pressure buildup in tank — tank manufacturer had duty); Walton v. Harnischfeger, 796 S.W.2d 225 (Tex. App. 1990) (finding defendant crane manufacturer had no duty to warn under negligence or strict liability theories of a nylon strap used as rigging material because defendant did not manufacture, distribute, sell, or otherwise place nylon strap into stream of commerce); Cipollone v. Yale Indus. Prods., Inc., 202 F.3d 376 (1st Cir. 2000) (holding manufacturer of component liable only if defect existed in manufacturer’s component itself; manufacturer of nondefective lift, integrated by another company into larger package-handling system, was not liable under negligence theory for injury that resulted from defect in entire system). But see Cooley v. Quick Supply Co., 221 N.W.2d 763 (Iowa 1974) (upholding jury verdict, finding under § 388 defendant supplier of dynamite fuse had duty to warn because fuse was sold to be used as a trigger for detonating dynamite, a highly dangerous substance, supplied by another).

¶17 Under the language of § 388 and our precedent applying § 388, we hold the duty to warn is limited to those in the chain of distribution of the hazardous product. Because Viad did not manufacture, sell, or supply the asbestos insulation, we hold that as a matter of law it had no duty to warn under § 388. We reverse the Court of Appeals on the question of negligence.

Strict Liability

¶18 We apply the rule of strict liability embodied in the Restatement (Second) of Torts § 402A (1965), as the law in this jurisdiction with respect to unreasonably dangerous products.⁶ Section 402A declares that a product, though faultlessly manufactured and designed, may not be reasonably safe when placed in the hands of the ultimate user without first giving an adequate warning concerning the manner in which to safely use the product. Liability is imposed on parties in the chain of distribution, including sellers, wholesale or retail dealers or distributors, and manufacturers. Seattle-First Nat’l Bank v. Tabert, 86 Wn.2d 145, 148-49, 542 P.2d 774 (1975); Restatement (Second) op Torts § 402A cmt. f. We justify imposing liability on the defendant who, by manufacturing, selling, or marketing a product, is in the best position to know of the dangerous aspects of the product and to translate that knowledge into a cost of production against which liability insurance can be obtained. Here, Viad did not manufacture or market the asbestos insulation. Nor did Viad have control over the type of insulation the navy selected. Thus, as the following analysis of these factors establishes, Viad is not strictly liable for failure to warn.

¶19 Under § 402A, strict liability applies equally well to cases involving manufacturing defects, design defects, and failures to warn. James A. Henderson, Jr. & Aaron D. Twerski, Doctrinal Collapse in Products Liability: The Empty Shell of Failure To Warn, 65 N.Y.U. L. Rev. 265, 271 (1990). Professors Henderson and Twerski note that while the text of § 402A does not explicitly state that it applies to design and warning claims, its comments, especially comments h, i, j, k, and p, make clear that the drafters intended that result.⁷ Henderson & Twerski, supra, at 271 n.21.

¶20 We have found it inaccurate to speak of a properly manufactured but necessarily dangerous product as being in a “defective” condition. See Little, 92 Wn.2d at 121 (analyzing and rejecting language of comment h that says where a defendant has failed to give adequate warning of a danger, “ ‘a product sold without such warning is in a defective condition’ ”). Instead of defective, we find it more appropriate to describe a product bearing an inadequate warning as “unreasonably dangerous.” This description is congruous with comment j, which says that “[i]n order to prevent the product from being unreasonably dangerous [even though faultlessly made], the seller may be required to give directions or warning, on the container, as to its use.” (Emphasis added.)

¶21 We have further rejected the language in comment h that suggests a duty on the part of the seller to provide warnings as imposing a negligence principle upon the doctrine of strict liability. Little, 92 Wn.2d at 121. We have not, however, consistently maintained a clear distinction between strict liability and negligence theories in the failure to warn context. See, e.g., Teagle v. Fischer & Porter Co., 89 Wn.2d 149, 156, 570 P.2d 438 (1977) (decided under strict liability theory of § 402A, but referring to manufacturer’s “duty to warn” users). This blurring of doctrines is poignantly apparent throughout the Court of Appeals’ strict liability analysis, which frequently and without distinction refers to the “duty to warn.” Simonetta, 137 Wn. App. at 27-32.

¶22 Although the theories are similar in certain contexts, distinctions exist. We recognize strict liability as a theory that may or may not be asserted alongside negligence in the failure to warn context and emphasize the contrast in analytical focus between the theories: in a negligence action, the focus is on the conduct of the defendant; in a strict liability action, the focus is on the product itself and the reasonable expectations of the user. Under strict liability, a product is not reasonably safe when it is unsafe to an extent beyond that which would be reasonably contemplated by the ordinary consumer.

¶23 Here, it is not disputed that Viad provided no warnings of the hazards of asbestos exposure. Nor is it disputed that the evaporator itself functioned as designed. Thus, we must determine whether reasonable persons could conclude only that the evaporator was not reasonably safe when it was sold without a warning of the dangers of asbestos exposure.

¶24 In Little, the plaintiff sued for damages under negligence and strict liability theories, based on a solvent supplier’s alleged failure to give adequate warning of the dangers involved in the use of the solvent. Little, 92 Wn.2d 118. We separated the theories of recovery and noted that if “negligent supplier” was proved, “inadequate warning” could generally be inferred and vice versa. We found, however, that proof of an inadequate warning will usually be a much simpler task for the plaintiff than proof of the negligence of the defendant.

¶25 Simonetta argues that proper use of the evaporator necessarily involved use of asbestos insulation, which resulted in his exposure to respirable asbestos. Thus, the evaporator itself was unreasonably dangerous without warnings. These warnings, Simonetta asserts, would have addressed the manner in which to use the evaporator safely, i.e., warning of the foreseeable dangers of respirable asbestos. He cites to Galvan v. Prosser Packers, Inc., 83 Wn.2d 690, 693-94, 521 P.2d 929 (1974) to argue that foreseeability of the use of the product is an element of strict liability. A close reading of Galvan, however, reveals that it does not support this argument.

¶26 In Galvan, the plaintiff slipped when he was operating a tractor, fell backward, and caught his foot in an unguarded corn harvester manufactured by the defendant. Galvan asserted under a theory of strict liability that the open construction of the corn harvester caused his injury and rendered its design defective and unreasonably dangerous. Unlike Simonetta, Galvan did not claim the corn harvester itself lacked adequate warning.

¶27 Galvan objected to a jury instruction that defined “proximate cause” in terms of what might have been foreseen by a man of ordinary prudence and intelligence. We found that this definition was too broad and that the focus in proximate cause analysis was rather on the foreseeable use of the product. Use of the corn harvester in conjunction with the tractor was foreseeable. It was not the tractor, however, but the design defect in the corn harvester that Galvan claimed was the proximate cause of his injury. Similarly, in this case, it was not the evaporator, but the dangers inherent in the asbestos insulation, a product Viad did not manufacture or supply, that was the proximate cause of Simonetta’s alleged injury. Case law supports the conclusion that there is no strict liability for failure to warn of the dangers inherent in another product. Therefore, as we discussed above, under negligence theory, we likewise hold that foreseeability has no bearing on the question of adequacy of warnings in these circumstances.

¶28 Simonetta also cites to Teagle, 89 Wn.2d 149, for the proposition that under § 402A, a manufacturer may be strictly liable for failure to warn of the dangers of using its product in conjunction with another product the manufacturer did not sell, supply, or recommend. In Teagle, plaintiff was injured when a “flowrator,” a device used to measure liquids in the production of fertilizer, exploded, sending ammonia into plaintiff’s eyes. The flowrator did not contain a warning that when measuring liquids at high pressures, operators should take protective measures due to the risk of breakage. The trial court’s conclusion that the flowrator was not reasonably safe was based on several reasons, most relevantly, that the manufacturer, Fischer & Porter, failed to warn users to take precautions when measuring liquids above a certain pressure. We affirmed the trial court, holding that in addition to failing to warn about such danger, the manufacturer failed to warn of the danger of using “Viton O-rings,” a product Fischer & Porter did not manufacture but that was used on the flowrator at issue and, later tests revealed, possibly caused the glass tube to break. Simonetta highlights portions of our opinion where we state that “[Fischer & Porter] knew that Viton O-rings were incompatible with ammonia, yet it did nothing more than recommend the use of Buna O-rings. It did not warn of the dangers which could result from using Viton O-rings with ammonia. The lack of this warning, by itself, would render the flowrator unsafe.” Teagle, 89 Wn.2d at 156.

¶29 This portion of the analysis in Teagle was tangential, in that the trial court found the flowrator was not reasonably safe absent warning of the danger of measuring liquids at high pressures without taking precautions. That reasoning alone was the basis of the trial court’s grant of summary judgment on the issue of inadequate warning. Thus, any additional analysis of Viton O-rings in Teagle was not central to the holding. We find, nonetheless, that this analysis supports the principle that where a product is safe only when specified parts are used, yet no specifications are given, strict liability for failure to warn may attach. Even so, this analysis does not apply in this case because the evaporator did not require specialized parts.

¶30 The Court of Appeals also distinguished Lockwood, 44 Wn. App. 330, stating that while the issue there was the identity of the asbestos manufacturer, here, there is no similar identity question. However, Lockwood, like many Washington cases discussing § 402A, supports the more general proposition that claims for inadequate warnings of dangers of a product are limited to those in the chain of distribution of the product, manufacturers being one such party. See, e.g., Haysom v. Coleman Lantern Co., 89 Wn.2d 474, 573 P.2d 785 (1978) (upholding trial court’s finding that a factual question was presented as to whether defendant manufacturer of a stove was strictly liable for alleged inadequate warnings of dangers incident to use of stove); Terhune v. A.H. Robins Co., 90 Wn.2d 9, 577 P.2d 975 (1978) (holding manufacturer of intrauterine contraceptive, deemed an “ ‘Unavoidably unsafe product’ ” under § 402A cmt. k, could not be strictly liable, having provided adequate warnings of hazards of use to physician who prescribed it (emphasis omitted)); Kimble v. Waste Sys. Int'l, Inc., 23 Wn. App. 331, 595 P.2d 569 (1979) (finding, in strict liability action against garbage truck manufacturer, that jury instruction on adequate warning was not reversible error because truck was reasonably safe without warnings); Haugen v. Minn. Mining & Mfg. Co., 15 Wn. App. 379, 550 P.2d 71 (1976) (finding sufficient evidence to support instruction on warning requirement of dangers of grinding discs in strict liability action against grinding disc manufacturer).

¶31 A case from California involves facts similar to the present case. See Wright v. Stang Mfg. Co., 54 Cal. App. 4th 1218, 63 Cal. Rptr. 2d 422 (1997). In Wright, plaintiff was employed by a fire department and was injured when a deck gun manufactured by defendant broke loose from its assembly. The Wright court concluded that defendant manufacturer could be strictly liable for failure to warn of the potential dangers of foreseeable mismatch of the deck gun with component parts it did not manufacture or provide. The deck gun manufacturer knew that if its product was combined with improper component parts, use of the assembly could result in injury.

¶32 We find Wright to be distinguishable. First, the Wright court engaged in a component part analysis. The court found that mismatch and corrosion of the components — the deck gun and attachments — resulted in the entire assembly failing under water pressure and causing injury. Here, as noted above, we find it unnecessary to engage in a component part analysis and find that under common law, because the evaporator itself operated as designed and Viad was not the manufacturer of the asbestos insulation, Viad cannot be strictly liable for failure to warn. We base this distinction on the fact that the evaporator functioned as intended, whereas an entire assembly in Wright failed under water pressure. Second, the rule of strict liability applied in Wright requires a defendant to adequately warn of known or knowable risk. We reject this portion of the Wright analysis and conclude that even if Viad knew its evaporator was being used in conjunction with asbestos insulation, our precedent does not support extending strict liability for failure to warn to those outside the chain of distribution of a product.

¶33 Furthermore, Simonetta cites to Stapleton v. Kawasaki Heavy Industries, Ltd., 608 F.2d 571 (5th Cir. 1979). In Stapleton, plaintiff’s son tipped over a Kawasaki motorcycle, and because the fuel switch had not been turned off, gasoline leaked from the tank and was ignited by the pilot light in an adjacent heater, causing fire damage to plaintiff’s home. Plaintiff sued Kawasaki under theories including failure to warn about the dangerous nature of the motorcycle’s fuel switch. Simonetta argues that the asbestos insulation is analogous to the gasoline, which was a product Kawasaki neither manufactured nor supplied, but was an integral addition that rendered the motorcycle dangerous without adequate warning of the potential hazards of gasoline. Rather than a warning of the hazards of gasoline, however, the inquiry in Stapleton centered on the dangerous nature of the fuel switch: the jury could find negligence or strict liability in failure to warn of the motorcycle’s “unsafe design feature”; leaving the fuel switch on would allow gasoline to spill from the tank when tilted to the left or right. Here, in contrast, there is no claim that the evaporator itself contained an unsafe design feature. Thus, Stapleton is distinguishable.

¶34 Viad and amici curiae rely on numerous cases from other jurisdictions that support the rule that strict liability does not require a manufacturer to warn of the hazards of another product. See Garman v. Magic Chef, Inc., 117 Cal. App. 3d 634, 638, 173 Cal. Rptr. 20 (1981) (finding it “semantic nonsense” to say that absence of a warning to check for gas leaks in other products makes a physically nondefective stove defective); Baughman v. Gen. Motors Corp., 780 F.2d 1131 (4th Cir. 1986) (rejecting claim that General Motors truck was defective because of inadequate warnings of dangers associated with multipiece wheel rims, and finding under statute adopting § 402A manufacturer of replacement component part causing injury would be liable for failure to warn); In re Thrombosis, 356 F. Supp. 2d at 1063 (finding Boeing not liable under § 402A for defective seats it did not manufacture or install, which caused deep vein thrombosis in passengers: “Boeing sold its ‘completed product’ (an aircraft with no seats) to the airlines with no defective condition”).

¶35 Of the many cases cited from other jurisdictions, Lindstrom v. A-C Product Liability Trust, 424 F.3d 488 (6th Cir. 2005), is most factually similar. In Lindstrom, plaintiff was diagnosed with mesothelioma, believed to be caused by asbestos exposure. Under theories of negligence and strict liability, Lindstrom sued several manufacturers of products used in conjunction with other manufacturers’ asbestos products. Though the central issue in Lindstrom was causation as it related to component parts and not the existence of a duty, the court found no causation because it concluded that a manufacturer cannot be held responsible for the asbestos contained in another product. Lindstrom, 424 F.3d at 496. For example, the Lindstrom court affirmed summary judgment for pump manufacturer Coffin Turbo, which did not manufacture or supply the asbestos products used to insulate its pumps. The court found Coffin Turbo could not be held responsible for the asbestos contained in another product, though it was attached to a Coffin Turbo product. Lindstrom, 424 F.3d at 496. It was those asbestos products, not Coffin Turbo’s pumps, that caused injury. The same is true here.

¶36 It is undisputed that Viad sold the evaporator without insulation and that it did not manufacture, sell, or select the asbestos insulation. Therefore, the completed product was the evaporator as delivered by Viad to the navy, sans asbestos insulation. Under § 402A, strict liability attaches when a manufacturer sells an unreasonably dangerous product. Like the court in Lindstrom, we con-elude that the unreasonably dangerous product in this case was the asbestos insulation. And as in Lindstrom, we find Viad cannot be held responsible for the asbestos contained in another manufacturer’s product.⁸

¶37 Because Viad was not in the chain of distribution of the dangerous product, we conclude not only that it had no duty to warn under negligence, but also that it cannot be strictly liable for failure to warn. That is, reasonable persons could conclude only that the evaporator was reasonably safe when it was sold without a warning of the dangers of asbestos exposure. We reverse the Court of Appeals on the question of strict liability.

Alexander, C.J., and Madsen, Owens, Fairhurst, and J.M. Johnson, JJ., concur.

1 Viad disputes whether it is Griscom Russell’s successor in interest, but that relationship is assumed for purposes of appeal. Por simplicity, we refer only to Viad throughout this opinion.

2 Though, in his appellate briefing, Simonetta refers to testimony that the gaskets in the Viad evaporator contained asbestos, in a motion for voluntary dismissal filed in trial court, Simonetta moved to dismiss all claims that remained operative after the trial court’s partial grant of summary judgment. This included voluntary dismissal of the claim against Viad for “exposure to asbestos containing gaskets incorporated into [Viad] manufactured equipment.” CP at 1375. Because this claim was dismissed and Viad’s petition for review addressed only the asbestos insulation, our analysis is limited to the asbestos insulation. See Fleming v. Stoddard Wendle Motor Co., 70 Wn.2d 465, 467-68, 423 P.2d 926 (1967). To have a claim under § 388, a party must satisfy all three subsections — (a), (b), and (c).

3 With reference to the duty to disclose, the law recognized in Washington is the Restatement (Second) of Torts § 388, which states:

One who supplies directly or through a third person a chattel for another to use is subject to liability to those whom the supplier should expect to use the chattel with the consent of the other or to be endangered by its probable use, for physical harm caused by the use of the chattel in the manner for which and by a person for whose use it is supplied, if the supplier

(a) knows or has reason to know that the chattel is or is likely to be dangerous for the use for which it is supplied, and

(b) has no reason to believe that those for whose use the chattel is supplied will realize its dangerous condition, and

(c) fails to exercise reasonable care to inform them of its dangerous condition or of the facts which make it likely to be dangerous.

4 Simonetta and amicus curiae Schroeter Goldmark & Bender argue foreseeability is relevant to determining the existence of a duty. In his briefing to the Court of Appeals, Simonetta argued that foreseeability of the injury created the duty to warn. This argument was squarely rejected in the Court of Appeals opinion: “Foreseeability does not create a duty but sets limits once a duty is established.” Simonetta, 137 Wn. App. at 23 n.2. Once this initial determination of legal duty is made, the jury’s function is to decide the foreseeable range of danger therefore limiting the scope of that duty. We agree with the Court of Appeals’ finding on this point and focus our analysis on the duty to warn as part of the reasonable care inquiry. Restatement (Second) of Torts § 388(c).

5 We decline to determine whether the evaporator and/or asbestos insulation may he classified as “component parts,” a term included in the definition of a “product” under RCW 7.72.010(3). This has no bearing on the conclusion that common law imposes the duty to warn of the hazards of a product only on parties in the chain of distribution of the hazardous product.

6 Section 402A reads as follows:

Special Liability of Seller of Product for Physical Harm to User or Consumer

(1) One who sells any product in a defective condition unreasonably dangerous to the user or consumer or to his property is subject to liability for physical harm thereby caused to the ultimate user or consumer, or to his property, if

(a) the seller is engaged in the business of selling such a product, and

(b) it is expected to and does reach the user or consumer without substantial change in the condition in which it is sold.

(2) The rule stated in Subsection (1) applies although

(a) the seller has exercised all possible care in the preparation and sale of his product, and

(b) the user or consumer has not bought the product from or entered into any contractual relation with the seller.

7 Comments i, k, and p relate to design claims, and comments h and j relate to warning claims. Comment h states in relevant part, “A product is not in a defective condition when it is safe for normal handling and consumption. . . . Where, however, [the seller] has reason to anticipate that danger may result from a particular use, ... he may be required to give adequate warning of the danger (see cmt. j), and a product sold without such warning is in a defective condition.” Comment j states in relevant part, “Directions or warning. In order to prevent the product from being unreasonably dangerous [even though faultlessly made], the seller may be required to give directions or warning, on the container, as to its use.”

8 Such a finding is supported by the policies underlying imposition of strict liability:

On whatever theory, the justification for the strict liability has been said to be that the seller, by marketing his product for use and consumption, has undertaken and assumed a special responsibility toward any member of the consuming public who may be injured by it; that the public has the right to and does expect, in the case of products which it needs and for which it is forced to rely upon the seller, that reputable sellers will stand behind their goods; that public policy demands that the burden of accidental injuries caused by products intended for consumption be placed upon those who market them, and be treated as a cost of production against which liability insurance can be obtained; and that the consumer of such products is entitled to the maximum of protection at the hands of someone, and the proper persons to afford it are those who market the products.

Restatement (Second) of Torts § 402A cmt. c. None of these interests support imposing strict liability on Viad, who had no control over the type of insulation the navy would choose and derived no revenue from sales of asbestos-containing products. See Rastelli v. Goodyear Tire & Rubber Co., 79 N.Y.2d 289, 591 N.E.2d 222, 582 N.Y.S.2d 373 (1992) (holding tire manufacturer Goodyear not required to warn about inherent dangers in another manufacturer’s multipiece rim when Goodyear produced a sound product compatible for use with 24 different models of rims; Goodyear had no control over the production of the rim, had no role in placing the rim in the stream of commerce, and derived no benefit from its sale).