DocketNumber： 1 CA-CIV 5445
Judges： Corcoran, Davis, Jacobson
Filed Date： 9/29/1983
Status： Precedential
Modified Date： 11/2/2024
OPINION
This is a products liability case. The sole issue on appeal is whether the trial court erred when it ruled as a matter of law in granting a directed verdict at the end of the plaintiffs case that a product is not unreasonably dangerous when the design defect alleged is open and obvious. The pertinent facts follow:
On May 26, 1976, appellant Glen Turner injured his hand while operating an ice machine at the Circle K ice plant. The ice machine was manufactured by appellee Leer Manufacturing Company, Inc. and was sold to appellee Machine Ice Company, which, in turn, installed the ice machine at the Circle K ice plant. Circle K has not been a party to this proceeding.
Turner had been working for Circle K at the ice plant for approximately two weeks. His duties were those of a general laborer, including loading ice into trucks, cleaning up, and assisting in the operation of the ice machine involved in his injury. He had just completed his freshman year at college and was working for the summer.
The function of the ice machine was to produce ice cubes into blocks of ice, each approximately 6" X 6" X 12" in size. Ice cubes were dropped into the ice machine’s compression chamber and were then compressed by a hydraulic ram into a block of ice. After compression, a solid UA" guillotine-like metal gate located at the front of the compression cylinder would slide down and the ram would then push the newly made block of ice out of the compression chamber through a 6" X 6" opening in the front of the machine. When the ice block had been ejected from the compression chamber, the metal gate would snap up, closing the chamber so that the compression process could be repeated. It took a split second for the metal gate to move from the down position to the up position. After the ice block was ejected from the chamber, it traveled down an exit ramp to a bagging machine, located approximately four feet in front of the ice machine itself.
Turner was assisting in the operation of the ice machine for the second day. The accident occurred at about 10 p.m. in the swing shift. The temperature in the room was between 40° to 45°. Turner wore gloves and an insulated jump suit. As ice blocks were produced by the machine it was his responsibility to remove unmarketable ice blocks and crushed ice from the exit ramp and to remove the remaining marketable ice blocks to be stacked after they had been bagged and tied by the bagging machine located at the end of the exit ramp in front of the ice machine. To accomplish this task, Turner needed to position himself alongside the exit ramp which ran from the ice machine to the bagging machine. In the course of the operation of the ice machine, a quantity of crushed ice was also ejected, and Turner, in attempting to wipe the crushed ice off the ramp, accidentally stuck his left hand into the metal gate and failed to remove his hand before the gate moved up. As a result, his hand was smashed by the closing gate, amputating three fingers.
The gate was a piece of steel llA" thick. It raised to a closed position in a fraction of a second. It did not open and close at fixed intervals and a worker would not know when it was about to close. There was no guard to prevent access of a worker’s hand to the vicinity of the gate.
Turner’s sole theory of recovery at trial was that the ice machine was defective and that Leer and Machine Ice were strictly liable in tort. The only defect in the machine claimed by Turner was that it did not have a safety device, specifically some sort of a guard, in front of the metal gate and
At the close of Turner’s case, Leer and Machine Ice made motions for directed verdicts on the issue of liability. These motions were based on the uncontested fact that the danger presented by the unguarded compression chamber gate was open and obvious and, thus, not unreasonably dangerous. In response, Turner argued that the obviousness of the defect in the ice machine was only one factor to be considered in determining whether the defect was unreasonably dangerous. The trial court granted appellees’ motion and this appeal ensued. We reverse.
The main thrust of Turner’s argument on appeal is based on this reasoning: That the Supreme Court’s decision in Byrns v. Riddell, Inc., 113 Ariz. 264, 550 P.2d 1065 (1976) , rejects, as the only factor to be considered, the distinction between latent and patent defects for the purpose of imposing strict tort liability; that since the trial court allegedly relied upon this distinction as the sole basis for granting the directed verdict, its decision must be reversed. We agree.
Arizona has continued to adhere to the standards imposed by 2 Restatement (Second) of Torts § 402(A) (1965). Under the Restatement a plaintiff must prove that the product which caused him injury was defective, that the defect was unreasonably dangerous, and that his injuries were proximately caused by the defect. Rogers v. Unimac Co., 115 Ariz. 304, 565 P.2d 181 (1977) ; Vineyard v. Empire Machinery Co., 119 Ariz. 502, 581 P.2d 1152 (App.1978).
The parties to this appeal have not briefed the question of whether the failure to place a safety guard around the compression chamber gate constitutes a defect in the ice machine’s design; therefore, we find that the parties tacitly recognize that the lack of a sheer-point safety guard is a defect and pass to the determination of whether that defect is “unreasonably dangerous.” See Vineyard, 119 Ariz. at 505, 581 P.2d at 1155.
The dangerousness of a product cannot be measured in absolute terms. A determination that a product is unreasonably dangerous necessarily involves a balancing of considerations; a weighing of the likelihood and gravity of the harm against the utility of the product and the burden of taking precautions which would be effective to eliminate the danger. Our Supreme Court acknowledged this balancing approach in Byrns v. Riddell, supra.
Citing Dorsey v. Yoder Co., 331 F.Supp. 753 (E.D.Pa.1971), aff’d, 474 F.2d 1339 (3rd Cir.1973), the court in Byrns set forth the following risk/benefit factor analysis to determine if a defect is unreasonably dangerous:
(1) The usefulness and desirability of the product;
(2) the availability of other and safer products to meet the same need;
(3) the likelihood of injury and its probable seriousness;
(4) the obviousness of the danger;
(5) common knowledge and normal public expectation of the danger (particularly for established products);
(6) the avoidability of injury by care in use of the product (including the effect of instructions or warnings); and
(7) the ability to eliminate the danger without seriously impairing the usefulness of the product or making it unduly expensive.
113 Ariz. at 267, 550 P.2d at 1068.
The Byrns risk/benefit analysis has been criticized because it places emphasis on the reasonableness of the risk associated with a product rather than on some property of the product itself. See e.g. Brady v. Melody Homes Mfr., 121 Ariz. 253, 589 P.2d 896 (App.1978). In design defect cases, however, the use of negligence terminology is seemingly unavoidable because the adequacy of a product’s design necessarily depends upon its reasonableness. See Restatement § 402A. Were the negligence-like concept of unreasonable danger to be
We follow the lead of our Supreme Court in Byrns and adopt its risk/benefit factor analysis in determining whether the ice machine’s design in this case was unreasonably dangerous. Although the Byrns analysis employs negligence terminology, the risk/benefit approach to determining whether a product is unreasonably dangerous can more accurately be seen as a limitation on liability, otherwise any defect in a product, without any consideration of risk, would render a defendant absolutely liable.
Leer and Machine Ice urge this court to find that the ice machine was not unreasonably dangerous because the danger created by the unguarded compression chamber door was patently obvious. In essence, the appellees advocate a reinvigoration of the so-called “latent-defect” rule established by this court in Maas v. Dreher, 10 Ariz.App. 520, 460 P.2d 191 (1969). Under this rule an injured party is precluded from recovery where the danger encountered is not hidden, and thus is to some degree reasonably contemplated by the average user. The “latent-defect” rule, however, was specifically rejected by our Supreme Court in Byrns as encouraging patent design defects. 113 Ariz. at 267, 550 P.2d at 1068. For a similar reason in Palmer v. Massey-Ferguson, Inc., 3 Wash.App. 508, 476 P.2d 713 (1970), a Washington appellate court held that it was proper for a trial court to refuse to give a requested instruction that a manufacturer has no duty to provide guards to prevent injury from a patent peril or source manifestly dangerous:
The rule excusing the duty of safe design because of a patent peril has come under criticism in treatises. See 1 Frumer & Friedman, Products Liability § 7.02 (1968). It seems to us that a rule which excludes the manufacturer from liability if the defect in the design of his product is patent but applies the duty if such a defect is latent is somewhat anomalous. The manufacturer of the obviously defective product ought not to escape because the product was obviously a bad one. The law, we think, ought to discourage misdesign rather than encouraging it in its obvious form.
3 Wash.App. at 517, 476 P.2d at 718-719 (emphasis added).
Clearly, in measuring the likelihood of harm, one may consider the obviousness of the defect since it is reasonable to assume that the user of an obviously defective product will exercise special care in its operation and consequently the likelihood of harm diminishes. The obviousness of a defect is, however, only one factor to be considered in the determination of whether the defect is unreasonably dangerous. Byrns, 113 Ariz. at 267, 550 P.2d at 1068; Moorer v. Clayton Mfg Corp., 128 Ariz. 565, 568, 627 P.2d 716, 719 (App.1981), cert. denied, 454 U.S. 866, 102 S.Ct. 328, 70 L.Ed.2d 167 (1981); see Vineyard v. Empire Machinery Co., 119 Ariz. 502, 505, 581 P.2d 1152, 1155 (App.1978); see W. Kimble & R. Lesher, Products Liability § 135 (1979). Therefore, we hold that even though the danger associated with the unguarded compression chamber gate was obvious to Turner, this fact does not ipso facto preclude recovery. Other factors must be considered in determining the likelihood of injury associated with the ice machine’s operation.
At trial, Turner’s expert witness, David V. MacCollum, a safety engineer, testified as follows:
Q [Direct examination by Mr. Marks, Turner’s counsel]: Do you have an opinion, based upon reasonable scientific probability — certainty, that this machine that is indicated in the photograph and discussed in the depositions was unreasonably dangerous for its intended and foreseeable use?
*334 A Yes.
Q What is your opinion?
A Well, I feel that it is unreasonably dangerous because the hazard is severe and its likelihood of causing injury is well-defined in standards background, as to the requirement for easily and reasonably guarded guards for such devices that minimize this danger with nominal cost and are effective and they do not interrupt the production.
Q What type of guarding are you talking about, sir?
A Oh, primarily two types. One is a shield guard, which one of the photos [in evidence] has on it. By its nature, it makes it difficult to reach into the danger zone. The other is a flap, which would serve to cover the guillotine or shear area, and either or both, working in tandem, would provide an effective guard by all acceptable standards known for a number of years.
(Emphasis added.)
On cross-examination, Mr. MacCollum testified as follows:
Q [By Mr. Beale, counsel for Leer]: No one needed to tell you, even though you never saw this machine in operation, that if you put your hand in there where that gate operates, you would be injured? A Well, to me, as a safety engineer, I know that that type of arrangement results in only a matter of time until someone, for some reason, somehow gets their hands into it and then an injury results. So, my life has been geared to the prevention and it’s very basic to me that the way you prevent these types of injuries is not to base it upon hopefully hoping that all human performance is going to be 100 percent perfect 100 percent of the time. The easiest, the cheapest and the most expedient method is to put a guard on it.
(Emphasis added.)
Furthermore, Mr. MacCollum testified that because the ice making process required the stationing of an employee near the compression chamber gate the level of risk associated with the unguarded compression chamber gate was increased:
Q [By Mr. Marks]: There’s been testimony here that Mr. Turner — or the positioning of ... Mr: Turner was where this X is on the diagram [between the bagging machine and the ice machine along side the exit ramp] .... I believe the testimony was that [he] had to take a small step to the left to brush away ice that would be coming out of the machine that was not made as it should be in the 6 by 6 by 12 length ....
Is the proximity to this shearer or gate an important factor to you in making your analysis?
A It’s a very critical matter, because it’s acceptable on work surface or floor space that you work in and, also, because of the necessity to often sort defective product as it comes out, that is, the ice cubes that are unsatisfactory for bagging, and, also, if there is some debris of snowball or chips or chunks of ice, the next perfect or the next usable block of ice will come out, go down the ramp and it will precede it and slide it into the bag in front of it and, hence, make it difficult to package it into the sack.
So, because of this, there are many production and pure incentives to see that that trash or hunks of spare ice are not going to contaminate your useful product and, because of this, the risk is increased, because the people are going to be frequenting that area with their hands and they’re going to be doing it out of the side of their eye, where they don’t always have direct vision.
(Emphasis added.)
Even when a danger is appreciate ed, circumstances may cause it to be momentarily forgotten. When a person must work in a place of possible danger, the care which he is bound to exercise for his own safety may well be less, due to the necessity of giving attention to his work, than is normally the situation. In this case, in order to operate the ice machine in an efficient and economical manner, Turner had to stand in the vicinity of a closing gate capable of amputating human limbs and, on
The deposition of Douglas M. Connor, a Vice President of and engineer for Machine Ice, was read at trial. Although Mr. O’Con-nor stated that he was not qualified to testify whether the ice machine without a guard was defective, he did testify that it would have been “absolutely” obvious to anyone looking at the gate that it would have been dangerous to put his hands in the path of the gate. He also stated that the placing of a safety guard at the chamber opening was feasible and practicable and that such a guard would not interfere with the functional operation of the ice machine. Indeed, a guard was placed on the machine within a day or two after the Turner accident.
Q [By Mr. Marks]: Did the guard being placed on the machine affect the operation of the machine at all or the securing of the product from the machine?
A No.
Q In other words, if the guard had been on before Bart Turner had been injured, that would not have interfered with his job at all, is that correct?
A Yes.
On a motion for directed verdict at the end of plaintiff’s case, the trial judge must view the evidence in a light most favorable to plaintiff, accepting the truth of whatever evidence he has introduced. Byrns, supra. The evidence clearly shows that Turner .knew of the danger presented by the unguarded compression chamber gate. On the other hand, a guard would not have eliminated the machine’s usefulness nor would it in any way interfere with the functional operation of the machine. Moreover, the likelihood of injury was “only a matter of time” and its probable seriousness was great. Although no evidence was presented as to the cost of placing a guard on the machine, it is apparent from the exhibits introduced at trial, showing the cage-like guard which was installed on the ice machine following Turner’s accident, that the cost of the guard was small by any standard. Ultimately, all of these factors were to be weighed by the jury in making their determination as to whether the ice machine was unreasonably dangerous as designed. See Byrns, supra. Balancing the likelihood of harm and the gravity of harm if and when it happens against the burden of the precaution which would be effective to avoid the harm, we find that reasonable minds could differ in whether the balance tipped in favor of appellees Machine Ice and Leer.
During the argument on appellees’ motion for a directed verdict, appellees took the position that the Byrns decision had lost vitality in light of this court’s holding in Vineyard v. Empire Machinery Co., supra, which they believed had resurrected the patent-latent defect rule. The appellees mistook the import of Vineyard, which involved an earth moving machine allegedly defective for lack of rollover bars. In Vineyard this court acknowledged the holding of Byrns v. Riddell that obviousness of danger is a relevant consideration but not controlling in determining the issue of unreasonable danger. This court then turned to the more significant consideration, likelihood of danger, and found that plaintiff’s case was completely lacking in evidence on that point. Absent evidence that the 20-ton earth mover had the propensity to roll over, the court characterized the likelihood of danger as “slight.” Thus, Vineyard stands for the proposition that an open and obvious defect does not render a product unreasonably dangerous absent evidence that significant risk of serious harm remains despite the obvious nature of the defect. It does not alter the rule in Byrns v. Riddell that where, as here, a plaintiff demonstrates that a defect presents a serious risk of harm whether latent or patent, he is
The judgment of the trial court is reversed.