In re Johnson

Bland, Judge,

delivered the opinion of the court:

The subject matter of this appeal is for certain improvements in mechanism for feeding sheets, particularly metal sheets, to a lithographing press. Some nine claims were allowed in the Patent Office, and four claims, which were broader in scope, were rejected by the primary examiner on the ground of lack of invention in view : of three references:

Cameron, 1283659, November 5, 1918.

Conran, 1301799, April 22, 1919.

Kronquest, 1395232, October 25, 1921.

The claims which were rejected are as follows:

14. In sheet feeding apparatus the combination of a support for a stack of sheets, a vertically reciprocating vacuum cup arranged above said support adapted to be exhausted when in contact with the sheet and to be open to- the atmosphere when in elevated position, mechanism for raising the cup and thereafter releasing the same, and a spring which presses the cup when released into contact with the upper sheet of the stock.

15. In sheet feeding apparatus the combination of a support for a stack of sheets, a vertical reciprocating vacuum cup arranged above said support adapted to be exhausted when in contact with the sheet and to be open to- the atmosphere when in elevated position, mechanism for raising the cup and thereafter releasing the same, a spring which presses the cup when released into contact with the upper sheet of the stack, and a horizontally reciprocating element adapted to engage the edge of the sheet on the cup when raised and give said sheet movement laterally away from the stack.

10. In sheet feeding apparatus the combination of a support for a stack of sheets, a vertically reciprocating resilient vacuum cup arranged above said support adapted to- be exhausted when in contact with the sheet and to be open to the atmosphere when in elevated position, mechanism for raising the cup and thereafter releasing the same, and a spring which. presses the cup when released into contact with the upper sheet of the stack.

17. in sheet feeding apparatus the combination of a support for a stack of sheets, a plunger vertically arranged above the support and provided with an air port therethrough and with á resilient vacuum cup at its lower end, means providing a vacuum duet, a rotating cam which raises the plunger putting said port in communication with the atmosphere, a spring operative when the plunger is released by said cam for forcing the eup into contact with the stack of sheets and bringing said port into register with said vamum duct, and a horizontally reciprocating element adapted to engage the edge of the sheet on the cup when raised and give said sheet movement laterally away from the stack.

The italicized words are quoted from the claims as they appear in appellant’s brief, and are by him stated to be so italicized for the purpose of differentiating the claims from the cited patents.

The board of appeals, by a majority decision, affirmed the action of the primary examiner in rejecting the claims. One member of the board of appeals dissented from the decision of the majority.

The mechanisms of the reference Conran and applicant’s disclosure are so complicated that no useful purpose would be served by describing the same in detail here. The structures of applicant’s disclosure and of the references are, we think, sufficiently, described in the decision of the majority of the board and in the dissenting opinion.

Appellant in this court states that—

It is well settled that where the claimed invention is for a combination of parts, such combination is patentable if new as a combination even though alt of tlie parts are separately old and some of them are found in combination. (Italics quoted.)

He furthermore states that—

Tlie question is, therefore, whether the Conran patent does or does not disclose the same general organization of parts claimed by appellant.

The first statement may be all right as far as it goes, but it does not go far enough. It should also state that the combination of old parts must produce a new and useful result and must not be such as is obvious to the mechanic. As to the second quoted statement, the issue is more than “ whether the Conran patent does or does not disclose the same general organization of parts claimed by appellant.” A little different arrangement, on the part of applicant, of the various parts shown in Conran, with slightly different functions, would not of necessity result in patentable invention. The latest expression of the law on this question, to which our attention has been directed, is found in the decision of the Supreme Court of the United States in Powers-Kennedy Contracting Cory, and Fleck v. Concrete Mixing and Conveying Co., decided December 15, 1930. In an opinion by Mr. Justice Roberts, the law on this subject is summed up in the following language:

For these reasons we find that the patent is invalid. It consists of a combination of elements all of which were old in the art. Its application to the transportation of concrete did not involve invention. Neither the combination of old elements or device accomplishing no more than an aggregate of old results (Hailes v. Van Wormer, 20 Wall. 353; Office Specialty Co. v. Fenton, 174 U. S. 492, 87 O. G. 118; Grinnell v. Johnson, 247 U. S. 426, 254 O. G. 225) nor the use of an old apparatus or appliance for a new purpose (Roberts v. Ryer, 91 U. S. 150) is invention.

We conclude after a careful study of appellant’s disclosure and the Conran structure that Conran not only does not have the same structure or the same combination of parts as is shown in applicant’s device, but that it is probable that the Conran patent can not operate in the same manner and do the same desirable things that can be done by appellant’s structure. The same is true as to the other references and they are less pertinent. Appellant has devised a mechanism consisting of a plunger and vacuum cup in combination with a spring which, when released, makes accurate pressure upon a stack of sheets without regard to their exact height. Applicant’s device does not require that the pile of sheets be raised so that the top of the same will always be at exactly the same height, which, to our minds, to say the least, is curing a very weak place in Conran’s structure. Furthermore, it seems probable that applicant’s machine will satisfactorily work on a material which could not be satisfactorily handled by the Conran device.

It seems to us that there is, at least, a reasonable doubt as to •whether appellant has invented anything which the disputed claims cover. In this view we are, we think, supported by the fact that one of three members of the board is very positive that the appealed claims cover features of appellant’s structure which required invention to produce.

We are, therefore, of the opinion that under such circumstances, the claims should have been allowed and the decision of the Board of Appeals is reversed.