Itochu Bldg. Prods. Co. v. United States

Slip Op. 18-24
UNITED STATES COURT OF INTERNATIONAL TRADE
ITOCHU BUILDING PRODUCTS CO., INC.,
TIANJIN JINCHI METAL PRODUCTS CO.,
LTD., TIANJIN JINGHAI COUNTY
HONGLI INDUSTRY & BUSINESS CO.,
CERTIFIED PRODUCTS
INTERNATIONAL INC., CHIIEH YUNGS
METAL IND. CORP., HUANGHUA JINHAI
HARDWARE PRODUCTS CO., LTD.,
SHANGDONG DINGLONG IMPORT &
EXPORT CO., LTD., TIANJIN ZHONGLIAN
METALS WARE CO., LTD., HENGSHUI
MINGYAO HARDWARE & MESH
PRODUCTS CO., LTD., HUANGHUA
XIONGHUA HARDWARE PRODUCTS CO.,
LTD., SHANGHAI JADE SHUTTLE
HARDWARE TOOLS CO., LTD.,
SHANGHAI YUEDA NAILS INDUSTRY Before: Jane A. Restani, Judge
CO., LTD., SHANXI TIANLI INDUSTRIES
CO., LTD., CHINA STAPLE ENTERPRISE
(TIANJIN) CO., LTD., QIDONG LIANG Consol. Court No. 12-00065
CHYUAN METAL INDUSTRY CO., LTD.,
ROMP (TIANJIN) HARDWARE CO., LTD.,
CYM (NANJING) NINGQUAN NAIL PUBLIC VERSION
MANUFACTURE CO., LTD. a/k/a CYM
(NANJING) NAIL MANUFACTURE CO.,
LTD., SHANXI PIONEER HARDWARE
INDUSTRIAL CO., LTD., and MINGGUANG
ABUNDANT HARDWARE PRODUCTIONS
CO., LTD.,
Plaintiffs,
THE STANLEY WORKS (LANGFANG)
FASTENING SYSTEMS CO., LTD., and
STANLEY BLACK & DECKER, INC.,
Consolidated Plaintiffs,
v.
PUBLIC OPINION
Consol. Court No. 12-00065 Page 2
UNITED STATES,
Defendant,
MID CONTINENT NAIL CORPORATION,
Defendant-Intervenor.
OPINION
[Commerce’s remand redetermination results in its administrative review of an antidumping
duty covering steel nails from China are sustained.]
Dated: March 22, 2018
Ned H. Marshak, Grunfeld, Desiderio, Lebowitz, Silverman & Klestadt LLP, of
Washington, DC, for plaintiffs. With him on the brief were Bruce M. Mitchell, Mark E. Prado,
and Dharmendra N. Choudhary.
Lawrence J. Bogard, Neville Peterson, LLP, of Washington, DC, for consolidated
plaintiffs.
Tara K. Hogan, Trial Attorney, Commercial Litigation Branch, Civil Division, U.S.
Department of Justice, of Washington, DC, for defendant. With her on the brief were Chad A.
Readler, Acting Assistant Attorney General, Jeanne E. Davidson, Director, Patricia M.
McCarthy, Assistant Director, and Sosun Bae, Trial Attorney. Of counsel on the brief was
Jessica DiPietro, Attorney, Office of the Chief Counsel for Trade Enforcement and Compliance,
U.S. Department of Commerce, of Washington, DC.
Adam H. Gordon, The Bristol Group PLLC, of Washington, DC, for defendant-
intervenor. With him on the brief was Ping Gong.
Restani, Judge: Before the court is the U.S. Department of Commerce (“Commerce”)’s
Final Results of Redetermination Pursuant to Itochu Building Products Co., Inc., et al v. United
States, ECF No. 163 (“Remand Results”), concerning the second administrative review, for the
period August 1, 2009, through July 31, 2010 (“POR”), of the antidumping (“AD”) order on
certain steel nails from the People’s Republic of China (“PRC”). See Certain Steel Nails From
the People's Republic of China: Final Results of the Second Antidumping Duty Administrative
PUBLIC OPINION
Consol. Court No. 12-00065 Page 3
Review, 77 Fed. Reg. 12,556 (Dep’t Commerce Mar. 1, 2012) (“Final Results”). 1 For the
reasons stated below, Commerce’s Remand Results are sustained.
BACKGROUND
The court assumes that all parties are familiar with the facts of the case as discussed in
Itochu Building Products Co., Inc., et al., v. United States, Slip Op. 17-73, 2017 WL 2703810, at
*1–*4 (CIT June 22, 2017) (“Itochu”). For the sake of convenience, the facts relevant to this
remand are summarized herein. In the Final Results, Commerce calculated the surrogate value
(“SV”) of steel plate using GTA India data because it found Joint Plant Committee (“JPC”) data
from India to be less suitable for valuing the factors of production (“FOPs”) for steel plate. 2
Certain Steel Nails from the People’s Republic of China: Issues and Decision Memorandum for
the Final Results of the Second Antidumping Duty Administrative Review, A-570-909, POR
08/01/2009-07/31/2010, at 24–25 (Dep’t Commerce Feb. 23, 2012) (“I&D Memo”). Commerce
also decided to use financial statements from Sundram Fasteners Limited (“Sundram”), and
Bansidhar Granites (“Bansidhar”), to calculate surrogate financial ratios for steel nails because
the other financial statements on record were either not contemporaneous with the POR, or were
1
This matter was transferred to the current judge on March 20, 2017. Order of Reassignment,
ECF No. 140.
2
Because Commerce considers the PRC a non-market economy (“NME”), Commerce creates a
hypothetical market value for steel nails in conducting its review. See Downhole Pipe & Equip.
LP v. United States, 887 F. Supp. 2d 1311, 1320 (CIT 2012) (citing Nation Ford Chem. Co. v.
United States, 166 F.3d 1373, 1375 (Fed. Cir. 1999)). To construct such a value, Commerce
relies on data from a market economy or economies to provide surrogate values for the various
factors of production used to manufacture the subject merchandise. See 19 U.S.C. §
1677b(c)(1)(B). In addition, Commerce uses financial statements from producers of identical or
comparable merchandise to yield surrogate financial ratios to calculate general expenses for
inclusion in normal value. See Hebei Metals & Minerals Imp. & Exp. Corp. v. United States,
366 F. Supp. 2d 1264, 1277 n.7, 29 CIT 288, 303 n.7 (2005).
PUBLIC OPINION
Consol. Court No. 12-00065 Page 4
known to include countervailable subsidy data. Id. at 11–15. Commerce requested remand,
however, to reevaluate whether Sundram’s financial statements included countervailable
subsidies. Itochu at *9. Lastly, Commerce applied AFA instead of neutral facts available in lieu
of data sought from Jinchi’s unaffiliated suppliers when Jinchi was unable to obtain the
supplier’s financial information requested. I&D Memo at 26-28.
On June 22, 2017, the court remanded the case to Commerce. Itochu at *17. The court
ruled that: (1) Commerce’s decision to use Global Trade Atlas (“GTA”) India data as the
surrogate value (“SV”) for steel plate was unsupported by substantial evidence, id. at *8; (2)
Commerce’s request for remand with regard to Sundram’s financial statements was justified and
appropriate, and thus approved, id. at *9; and (3) Commerce erred when it applied adverse facts
available (“AFA”) to Tianjin Jinchi Metal Products Co., Ltd. (“Jinchi”), id. at *16. The court
also directed Commerce and the defendant-intervenor, Mid-Continent Nail Corporation (“Mid-
Continent”), to address whether Mid Continent affected AD margins by accepting any payments
to withdraw its requests for an administrative review of 160 companies, and if so, whether this
was proper. Id. at *17.
On remand, Commerce reconsidered its evaluation of certain SV data, namely GTA India
data for steel plate prices and Sundram’s financial statements for financial ratios. Based on the
record data, Commerce decided to value steel plate using JPC data from India, Remand Results
at 3–13, and found that Sundram’s financial statements constitute the best record information for
financial ratio purposes, id. at 14–26. In addition, Commerce revisited its application of AFA to
missing FOP data for Jinchi’s unaffiliated masonry nails supplier, and determined to apply
neutral facts available. Id. at 26–34. Further, Commerce addressed the court’s questions and
Mid Continent’s responses regarding Mid Continent’s withdrawal of review requests in this
PUBLIC OPINION
Consol. Court No. 12-00065 Page 5
administrative review, finding no improper conduct. Itochu at *6, *17; Remand Results at 34–
39; Certain Steel Nails from the People’s Republic of China: Response to Questions Posed in
Court Order in Itochu Building Prods., et al. v. United States, Consol. Ct. No. 12-00065, Slip Op.
17-73 (June 22, 2017), A-570-909, POR 08/01/2009-07/31/2010, at 11 (July 14, 2017) (“Mid
Continent Withdrawal Letter”).
Consolidated Plaintiffs (“Plaintiffs”) 3 challenge Commerce’s continued reliance on
Sundram’s financial statements as a source for calculating surrogate financial ratios for steel nail
production. Plaintiffs’ Comments on Final Results of Redetermination, ECF No. 169, at 8–32
(“Pl. Cmts.”). Mid Continent challenges Commerce’s use of JPC India data as a SV for steel
plate and its application of neutral facts available to Jinchi, arguing Commerce misinterpreted of
the court’s instructions. Comments of Defendant-Intervenor Mid Continent Nail Corporation on
Final Results of Redetermination Pursuant to Court Remand, ECF No. 166, at 3–12 (“Def.-Int.
Cmts.”).
JURISDICTION AND STANDARD OF REVIEW
The court has jurisdiction pursuant to 28 U.S.C. § 1581(c). The court upholds
Commerce’s final results in an antidumping duty review unless it is “unsupported by substantial
evidence on the record, or otherwise not in accordance with law[.]” 19 U.S.C. §
1516a(b)(1)(B)(i).
3
The Plaintiffs included in this challenge are Itochu, Jinchi, The Stanley Works (Langfang)
Fastening Systems Co., Ltd. (“Stanley”), and Tianjin Jinghai County Hongli Industry & Business
Co. (“Hongli”).
PUBLIC OPINION
Consol. Court No. 12-00065 Page 6
DISCUSSION
I. Mid Continent’s Withdrawal of Review Requests
In Itochu, the court expressed concerns that Mid Continent may have improperly affected
antidumping margins by accepting payments in exchange for withdrawing its administrative
review request vis-à-vis 160 of the original 222 companies. Itochu at *5. The court directed
Mid Continent to provide a written response to Commerce addressing these concerns,
specifically asking why such a broad review was initially ordered and whether payments were
exchanged for the later withdrawal of the review request. Id. at *6.
In Mid Continent’s written response to Commerce, Mid Continent stated as an initial
matter that it acted within Commerce’s regulations in withdrawing its requests for review of
certain Chinese producers and/or exporters of subject merchandise. Mid Continent Withdrawal
Letter at 8. 4 Mid Continent indicated that its decision to withdraw the requests was based on the
particular facts of the case, as it knew them. Id. at 11. Most significantly, Mid Continent
asserted that: “No payments were made in exchange for the withdrawal of the requests.” Id.
Commerce did not have additional evidence to contradict Mid Continent’s responses and,
therefore, determined that no further investigation was warranted. Remand Results at 38–39.
This result is not challenged and is sustained.
4
See 19 C.F.R. § 351.213(d)(1): “The Secretary will rescind an administrative review under this
section, in whole or in part, if a party that requested a review withdraws the request within 90
days of the date of publication of notice of initiation of the requested review. The Secretary may
extend this time limit if the Secretary decides that it is reasonable to do so.”
PUBLIC OPINION
Consol. Court No. 12-00065 Page 7
II. Commerce Properly Relied on JPC Data to Value Steel Plate 5
In Itochu, the court found Commerce’s selection of GTA India import data was
unsupported by substantial evidence. Itochu at *7. The court noted that GTA India price data
was not close to the levels of other data and concluded that Commerce failed to consider the
reliability of GTA India data in the light of other data sources, and further failed to address
evidence suggesting that price does not correlate to steel plate thickness in the range at issue. Id.
at *8. Accordingly, the court instructed Commerce to: (1) consider whether other record data
sources rendered GTA India import data unreliable; and (2) explain what record evidence
supports Commerce’s decision to disregard available surrogate data for varying thicknesses of
steel plate. Id.
On remand, Commerce apparently interpreted the court’s “unsupported by substantial
evidence” holding to mean that GTA India data must not be used for either the SV or for
benchmarking analysis. Remand Results at 11. The court stated, rather, that the reliability of
Commerce’s selected surrogate value was called into question, and directed Commerce to assess
the other record data sources and explain what evidence supports its decision. Itochu at *8.
Commerce nonetheless considered the other potential data sets and decided to use JPC India data
because it has the next-highest contemporaneity at eight months of the POR and comes from the
primary surrogate country, India. Remand Results at 11–13. Second Pre-Prelim Surrogate
Value Rebuttal Submission for GDLSK Respondents’ in the Second Administrative Review of
Certain Nails from the People’s Republic of China, A-570-909, POR 08/01/2009-07/31/2010, at
Ex.2L (Dep’t Commerce June 24, 2011) (“Itochu SV Submission”). Steelworld data for India
5
Although the three mandatory respondents consumed steel wire rod in their production of steel
nails, see I&D Memo at 15, Commerce selected a surrogate value for cut steel plate, which is the
main input of the cut plate masonry nails purchased by Hongli from one of its suppliers, id. at 24.
PUBLIC OPINION
Consol. Court No. 12-00065 Page 8
covered only six months of the POR. Itochu SV Submission at Ex.2N. The other data sets were
used only for benchmarking or corroboration purposes. Remand Results at 5–6. No party
disputes the selection of JPC over Steelworld data.
Without conceding that GTA India data are aberrational, or otherwise not probative,
Commerce identified a different data set in India JPC that conforms to the “best available
information” criteria. Remand Results at 13, citing, e.g., Certain Preserved Mushrooms from the
People’s Republic of China: Final Results and Final Partial Rescission of the Sixth
Administrative Review, 71 FR 40477 (July 17, 2006) and accompanying Issues and Decision
Memorandum at Comment 1. Despite Commerce’s seemingly misguided interpretation of the
remand directive, its use of JPC data is supported by substantial evidence.
A. Analysis of Surrogate Valuation Factors for Steel Plate 6
When determining which SV data set to use, Commerce selects the “best available
information,” guided by the following factors: (1) public availability; (2) contemporaneity with
the POR; (3) representativeness of a broad market range; (4) location in an approved surrogate
country; (5) tax and duty-exclusivity; and (6) specificity to the output. Remand Results at 12-13,
citing, e.g., Notice of Final Determination of Sales at Less Than Fair Value and Affirmative
Critical Circumstances, In Part: Certain Lined Paper Products from the People’s Republic of
China, 71 FR 53079 (September 8, 2006) and accompanying Issues and Decision Memorandum
at Comment 3. . Commerce uses whichever data set satisfies the “breadth of the aforementioned
selection criteria.” Id. at 13. The specificity and representativeness factors are the focus of the
remand redetermination.
6
Confidential information within double brackets has been omitted.
PUBLIC OPINION
Consol. Court No. 12-00065 Page 9
Commerce initially decided against using JPC data primarily because the data were said
to be sourced from “significantly thicker cut steel plate than what Hongli’s 7 supplier used.” I&D
Memo at 25. Commerce contended that steel thickness was crucial to specificity. See id.
Plaintiffs submitted ten other data sets to demonstrate that: (1) the thickness of steel did
not affect the price; and (2) that JPC’s data were more appropriate than GTA India’s data. JPC’s
data were within the range of the other sets even though JPC prices covered thicker steel. 8
Itochu SV Submission at Ex.2A–Ex.2N. In the I&D Memo, Commerce summarily rejected the
probative value of these additional data sets, and refused to consider this evidence against
Commerce’s apparent conclusion that steel thickness corresponds to price, even within the
ranges of thickness at issue. I&D Memo at 25. 9 The court, however, concluded that these data
7
Hongli is one of the mandatory respondents examined in the administrative review at issue.
I&D Memo at 1, n.2. The steel plate its supplier used was in the [[ ]] range. Second
Administrative Review of Certain Nails from the People’s Republic of China: Factors of
Production for certain nails exported by Hongli which were produced by [[
]], A-570-909, POR 08/01/2009-07/31/2010, at Ex.5 (Dep’t Commerce Sept.
28, 2011).
8
The data sets which Plaintiffs submitted all showed price points between USD $0.683/kg and
USD $0.7840/kg, despite the steel covered by those data sets varying in thickness from 3 to
25mm. Itochu SV Submission at Ex.2A (showing steel plate prices). See also, e.g., id. at Exs.2D
and 2E (containing German export data, corresponding to price number two in Ex.2A, for steel
of thickness between 3 and 4.75mm (Ex.2D), and greater than or equal to 3mm (Ex.2E)), 2L
(containing JPC data, corresponding to price number eight in Ex.2A, for steel between 6 and
25mm thick). GTA India’s data shows a value of $1.68/kg for steel plate, id. at Ex. 2C, while
JPC data shows a value of $0.78/kg for 6 to 25mm thick steel plate, id. at Ex.2L.
9
On remand, Commerce noted that it finds the submitted data sets not probative, stating that it
prefers “POR-specific GTA data for the countries on the surrogate country list” when
“evaluating whether GTA data for a specific country is aberrational” (emphasis added). Remand
Results at 5, 11. Commerce did not address precedent stating that “export data from countries
that were not potential surrogates” may be “sufficient to call into question the reliability of the
[selected surrogate] data.” Itochu at *8 (citing Xinjiamei Furniture (Zhangzhou) Co. v. United
States, 2013 WL 920276, at *3, *6 (CIT Mar. 11, 2013)). Further, the one country on the SV
list, the Philippines, had even lower steel plate values. Itochu SV Submission at Ex.2H.
CONFIDENTIAL INFORMATION OMITTED
PUBLIC OPINION
Consol. Court No. 12-00065 Page 10
sets were in fact probative and should be considered. Itochu at *8. In spite of Commerce’s
reluctance, its use of JPC data on remand is supported by substantial evidence. JPC data satisfy
the main factors evaluated in selecting an SV. Commerce’s first choice for a steel plate SV was
GTA India data, because the data are allegedly more specific to Hongli’s product, in addition to
being tax-exclusive, publicly available, contemporaneous with the POR, and represented imports
into the principal surrogate country, India. I&D Memo at 25. GTA India data, however, has an
extremely narrow base, as it covers imports only from one highly developed steel-producing
country. 10 See id.
Commerce’s main argument against using JPC data 11 was that it was not sufficiently
specific. 12 Id. It is not clear that the difference in plate thickness, within the range at issue, is
important; it does not seem to affect price. See, supra, note 8. Commerce did acknowledge that
JPC data satisfied the other five “best available information” factors, determining that the data
were publicly available, presented a broad market average, were tax-exclusive, contemporaneous
10
GTA India includes only prices of imports from Germany. See Itochu SV Submission, at
Ex.2C. The high price may indicate it is for specialty steel, as record data covering German steel
plate exports more generally indicates an average price of $0.769/kg. See id. at Ex.2D and
Ex.2E.
11
The JPC data is derived from India domestic price data. Second Antidumping Administrative
Review and New Shipper Review of Certain Steel Nails from the People’s Republic of China:
Surrogate Values (“SVs”) for the Preliminary Results, A-570-909, POR 08/01/2009-07/31/2010,
at 4 (Dep’t Commerce Aug. 31, 2011) (“Prelim. SVs”). It covers steel plate imports, regardless
of origin, cleared through the cities of Kolkata, Delhi, Mumbai and Chennai. Itochu SV
Submission, at Ex.2L.
12
Whether or not rerolling takes place at Hongli, or its supplier, the court has previously
accepted Commerce’s view that specificity based on metal material size can be less important
than other factors when selecting SV for nails. See Itochu Building Products Co. Inc. v. United
States, 2018 WL 467986, at *6 (CIT Jan. 18, 2018). (“the diameter of the wire rod may change
throughout the production process… [so] Commerce’s determination that the mutability of the
wire rod input and substitutability of stock of different diameters lessens the importance of
diameter, is adequately supported.”).
PUBLIC OPINION
Consol. Court No. 12-00065 Page 11
with the POR, and from the primary surrogate country. I&D Memo at 24. On remand,
Commerce determined JPC data were the appropriate SV data set, but did so under protest, and
without conceding that JPC data were the most representative data set on record, under the “best
available information” criteria. Remand Results at 13.
There is no disagreement that GTA India data and JPC data are publicly available,
contemporaneous, tax and duty exclusive, and from the surrogate country. The substantially
higher price of steel in GTA India data (aberrational or not), 13 combined with the fact that GTA
India only covers imports from Germany, however, indicates that GTA India data are not
representative of a broad market average, at least in the sense of source. Commerce offered no
evidence to support its previous conclusion that plate thickness should be the controlling factor
and no party cites to evidence that would demonstrate this. Furthermore, if Commerce was
dissatisfied with the record data sets that demonstrated the reliability of JPC figures and the
unreliability of GTA figures, it was free to reopen the record. If there were a reason why GTA
India’s very high value was plausible as a SV for steel plate here, despite the much lower values
on record from developed and non-developed countries, that information was not on this record.
While Commerce’s belief that the court ordered it to choose a data set other than GTA
India was misguided, its final choice of JPC data is supported on this record as it satisfies
Commerce’s normal criteria and falls within a plausible price range. There is no reason to
13
In Itochu, the court directed Commerce to address Plaintiffs’ evidence that GTA India’s data
are aberrational. Id. at *8. Commerce, however, simply noted that it “reviews any disparities on
a case-by-case basis” and that the SV must be “substantially higher than the benchmark data on
the record” in order to be considered aberrational. Remand Results at 5. In other words, it did
not acknowledge that the record data indicates a narrow range of low steel prices from various
sources, except for the much higher GTA India price data.
PUBLIC OPINION
Consol. Court No. 12-00065 Page 12
remand this matter, as requested by Mid Continent, as on this record GTA India is a flawed
choice and Commerce’s analysis supporting its new selection is sufficient.
III. Commerce Reasonably Selected Sundram’s Surrogate Financial Statements
The court granted Commerce’s request for a remand to reconsider whether it had reason
to suspect or believe that Sundram received countervailable subsidies, so that its financial
statements 14 would not provide useful surrogate value data. Itochu at 23. On remand,
Commerce reexamined its decision to use Sundram as one of the market economy (“ME”)
surrogate companies despite the fact that Sundram: (1) was located and operated in a Special
Economic Zone (“SEZ”); and (2) qualified to receive special tax incentives under Section
35(2AB) of India’s Income Tax Act. Remand Results at 14–15. Commerce determined that it
was “appropriate to rely on Sundram’s financial statements,” because while Sundram was
eligible for subsidies, there was no evidence showing that Sundram actually benefitted from
them. Id. at 18.
In response to the Remand Results, Plaintiffs argue that Commerce’s analysis of the
subsidies was “directly contrary to controlling law and not supported by substantial record
evidence.” Pl. Cmts. at 8. Plaintiffs contend that Commerce “impermissibly conflated a rigid
test” by not correctly applying the “‘reason to believe or suspect’ standard.” Id. at 9. Further,
Plaintiffs argued that the evidence suggests Sundram did in fact benefit from subsidies based on
the SEZ and Income Tax Act, and thus Commerce erred in using Sundram as a surrogate. Id. at
15–24. Plaintiffs also argue that Sundram did not produce comparable merchandise. Id. at 24–
32. Plaintiffs nevertheless failed to demonstrate that Commerce’s evaluation was unreasonable,
14
Financial statements are used to calculate surrogate financial ratios. Prelim. SVs at 16.
PUBLIC OPINION
Consol. Court No. 12-00065 Page 13
particularly in the light of Commerce’s thorough consideration of the other potential surrogate
sources for financial ratios. I&D Memo at 10-15. 15
A. Special Economic Zone
To determine whether Sundram received subsidies, Commerce turned to the financial
statements provided by Sundram and considered whether the financial statement contained more
than “a mere mention that a subsidy was received.” Remand Results at 16 (citing Clearon Corp.
v. United States, 800 F. Supp. 2d 1355, 1358–59 (CIT 2011); Catfish Farmers of Am. v. United
States, 641 F. Supp. 2d 1362, 1379–80, 33 C.I.T. 1258, 1275–76 (2009)). The “mere fact” a
company is located in an Indian SEZ “does not suggest receipt of a specific subsidy” on its own,
because “benefits from India’s SEZ programs are not provided automatically to companies
located within the SEZ.” Id. at 17.
While Plaintiffs argued there was “substantial record evidence” showing Sundram
benefitted from India’s SEZ Act, the evidence cited was based on generalities about the SEZ
Act, and did not demonstrate that Sundram benefitted from the subsidies. Pl Cmts. at 16–17
(citing Certain Steel Nails from the People’s Republic of China: Submission of Surrogate
15
According to the I&D Memo, the record originally contained five financial statements: (1)
Bansidhar 2009-2010; (2) J&K 2008-2009; (3) Nasco 2008-2009; (4) Sundram 2009-2010; and
(5) Lakshmi 2009-2010, all of which Commerce considered thoroughly. I&D Memo at 11. In
the Preliminary Results, Commerce averaged the financial ratios of Bansidhar, Nasco, and J&K,
to obtain the surrogate financial ratios. Id. Commerce did not use the J&K and Nasco
statements for the Final Results because the financial statements from J&K and Nasco covered
fiscal periods prior to the POR. Id. at 12. Also, Commerce reviewed the financial statements for
Lakshmi and determined that it received countervailable subsidies during the POR under
programs previously investigated by Commerce. As a result, Commerce did not use the financial
statement of Lakshmi either. Id. at 11–12. The two remaining financial statements were
Bansidhar and Sundram. Both statements were for periods that overlap the POR. Id. at 12. For
the Final Results, Commerce averaged the financial statements for Bansidhar and Sundram,
finding they represented the best available information on the record for calculating financial
ratios. Id. at 14.
PUBLIC OPINION
Consol. Court No. 12-00065 Page 14
Values by Mid Continent Nail Corp., A-570-909, POR 08/01/2009-07/31/2010, at Ex.1, pages 9,
11, 33 (Dep’t Commerce Oct. 13, 2011) (“Mid Continent SV Submission”); Certain Steel Nails
from the People’s Republic of China, Second Administrative Review; [Stanley’s] Comments
Regarding Petitioner’s Surrogate Value Submission for the Final Results, A-570-909, POR
08/01/2009-07/31/2010, at Ex.5B (Dep’t Commerce Oct. 24, 2011)). Furthermore, companies in
the SEZ “must commit to export their production of goods and/or services,” Defendant’s
Response to Parties’ Comments Upon the Department of Commerce’s Remand Results, ECF No.
173, at 22 (“Commerce Response”) (quoting Issues and Decision Memorandum for the Final
Results of the Countervailing Duty New Shipper Review of Polyethylene Terephthalate Film,
Sheet, and Strip (PET Film) from India, C-533-825, NSR: 01/01/2009-12/31/2009, at 13 (Dep’t
Commerce May 27, 2011) (“PET Film I&D Memo”)), and that “in certain instances, a company
must also apply and qualify for the benefits of the subsidy programs to receive them,” Remand
Results at 17 (citing PET Film I&D Memo at 13–19). The record does not indicate that either of
these prerequisite actions were taken in this case. Accordingly, Commerce’s determination as to
the SEZ was substantially supported and the court sees no indication that legal standards were
not properly applied as to the SEZ determination.
B. Section 35(2AB) of India’s Income Tax Act
On remand, Commerce reexamined whether it had reason to suspect or believe that
Sundram actually received countervailable subsidies in the light of an EU decision finding
Section 35(2AB) of India’s Income Tax Act countervailable. Remand Results at 18. 16
Commerce, however, did not find any indication that Sundram “was approved or specifically
16
Commerce originally mistakenly stated that the EU had not made such a determination. I&D
Memo at 12 n.25. That conclusion, however, was incorrect. Itochu at *9.
PUBLIC OPINION
Consol. Court No. 12-00065 Page 15
received benefits from any programs related to Section 35(2AB).” Id. While the financial
statements mention Sundram’s eligibility for the subsidies in question, Commerce found “no
corresponding line item demonstrating that Sundram received any subsidies.” Id. Plaintiffs have
supplied no such evidence.
Nevertheless, Plaintiffs contend that Fuyao Glass Industry Group Co. v. United States,
requires Commerce to “demonstrate . . . it would have been unnatural for a supplier to not have
taken advantage of such subsidies.” Pl. Cmts. at 24 (quoting 29 C.I.T. 109, 118 (2005)).
Further, Plaintiffs argue that “like any other prudent business person, Sundram would have
availed subsidy benefits pursuant to Section 35(2AB).” Pl. Cmts. at 24. Commerce counters
that plaintiff’s proffered approach is but one way of assessing the evidence of subsidies.
Commerce Response at 20 (citing Gold East Paper (Jiangsu) Co. Ltd. V. United States, 121 F.
Supp. 3d 1304, 1307–08 (CIT 2015)). In the course of its discussion on subsidies, Fuyao does
not address the special problems presented by the use of bald financial statements, from which
Commerce derives ratios for overhead, selling, general, and administrative expenses. See 29
C.I.T. at 111 –119. This is necessarily an inaccurate process. Here, Commerce reviewed the
instant record and evaluated the four corners on the financial statements, because that was the
only evidence generally available during the POR. See Commerce Response at 23. Given the
limited choices available to Commerce on remand and the potential for further inaccuracy
stemming from the use of just one financial statement, Commerce’s decision not to reject
Sundram’s statement on this basis and its averaging approach were reasonable here. The court
finds Commerce’s decision adequately supported.
PUBLIC OPINION
Consol. Court No. 12-00065 Page 16
C. Comparable Merchandise
On remand, once Commerce determined that Sundram’s financial statements were
acceptable surrogates, based on a lack of demonstrable receipt of subsidies, it addressed Itochu
and Stanley’s concerns regarding whether Sundram produces comparable merchandise. Remand
Results at 19–23. In doing so, Commerce considered three factors: (1) physical characteristics;
(2) production process; and (3) end uses. Id. at 19.
As to physical characteristics, Commerce found nails and screws comparable because
they are “both made from steel [and] have a shank and head.” Id. at 20 (citing Mid Continent SV
Submission at Ex.10-1, pages 5–6 (“Certain Steel Nails from the UAE”) and Ex.10-2, page 8
(“Certain Fasteners from China and Taiwan”)). Both the NME producer’s nails and Sundram’s
screws were made from steel wire rod (“SWR”). Mid Continent SV Submission at Ex.6
(regarding Sundram’s use of SWR); I&D Memo at 14 (regarding respondents’ use of SWR).
Plaintiffs argue the SWR used for making automotive fasteners is “high tensile” as compared to
the “low-carbon and medium-carbon” SWR used for producing nails, and that this physical
distinction renders the products incomparable for SV purposes. Pl. Cmts. at 29. Plaintiffs,
however, do not provide any actual evidence of specific “chemical, physical, or mechanical”
differences between the two types of steel. Id. (quoting Remand Results at 22). Instead,
Plaintiffs merely argue that the two are “prima facie different.” Id. Plaintiffs also “ignore
record evidence that demonstrates . . . that Sundram produces other fasteners in addition to
automotive fasteners,” Commerce Response at 26; see Mid Continent SV Submission, at Ex.2,
pages 3–4, which indicates that at least some of Sundram’s fasteners are even more comparable
to the NME producer’s product.
PUBLIC OPINION
Consol. Court No. 12-00065 Page 17
As to the production processes, Commerce found them comparable for both nails and
automotive fasteners because they are both “produced from steel wire and rod,” “produced using
cold forming machines” and “subject to . . . head treatment and coating.” Remand Results at 21–
23 (citing Certain Steel Nails from the UAE at I-9–I-10, and Certain Fasteners from China and
Taiwan at 10). Commerce noted that it is “not required to ‘duplicate the exact production
experience’” when comparing the NME producer to Sundram. Id. at 22 (quoting Issues and
Decision Memorandum for the Final Determination in the Less Than Fair Value Investigation of
Certain Oil Country Tubular Goods from the Peoples' Republic of China, A-570-943, POI:
10/01/08-03/31/09, at Comment 13 (Dep’t Commerce Apr. 19, 2010)). Plaintiffs argue that
“Sundram undeniably utilizes sophisticated manufacturing processes for producing specialized
auto components including fasteners,” Pl. Cmts. at 26 (emphasis added); however, Plaintiffs fail
to provide any evidence for this claim, other than suggesting Sundram uses a “prima facie
different” high tensile steel, id. at 29. The court agrees with Commerce that although certain
stages in the production process may differ, if overall the processes are similar, this does not
necessarily weigh against comparability. See Remand Results at 22–23.
Finally, Commerce found that the end uses of both products were sufficiently comparable
for its purposes. In prior cases, Commerce defined the end use of a nail as, “holding separate
pieces together,” Certain Steel Nails from the UAE at I-6, and the end use of a screw as,
“hold[ing] [and] join[ing]… or maintain[ing] the equilibrium of single or multiple components,”
Certain Fasteners from China and Taiwan at 9. Thus, Commerce determined that nails and
screws have a comparable end use in that they are both used to hold different pieces together.
Remand Results at 20. Plaintiffs would have Commerce expand the test for comparability to
include factors such as “interchangeability of goods, channels of distribution, customer
PUBLIC OPINION
Consol. Court No. 12-00065 Page 18
perception, and manufacturing facilities” to test whether automotive fasteners and nails have
comparable end uses. Pl. Cmts. at 28–29. Plaintiffs, however, offer no precedent or strong
reasons for requiring consideration of these factors for this particular determination. Id.
Moreover, Plaintiffs cited decisions in three steel nails investigations, Oman, Taiwan, and
Korea, decided after the POR as proof that automotive fasteners were not comparable to steel
nails. Pl. Cmts. at 29–30. Upon closer examination, however, each case is distinguishable.
While these decisions refer to Sundram’s lower specificity, in only one, the Final Determination
in Oman, were Sundram’s financial statements rejected principally based on this factor. 17 In the
other investigations, the decision not to use Sundram’s financial statements was based, in part,
on Sundram’s lack of production in the subject countries, Taiwan 18 and Korea, 19 respectively.
17
Certain Steel Nails From the Sultanate of Oman: Final Determination of Sales at Less Than
Fair Value, 80 Fed. Reg. 28,972 (May 20, 2015); Certain Steel Nails from the Sultanate of
Oman: Issues and Decision Memorandum for the Final Determination of Sales at Less Than Fair
Value, A-523-808, POI 04/01/2013-03/31/2014 (Dep’t Commerce May 13, 2015) (“Oman Final
I&D Memo”). The company chosen to supply substitute financial information in this market
economy case, Hitech Fastener Manufacture (Thailand) Co., Ltd., produced only steel screws.
Oman Final I&D Memo at Comment 1. Commerce did, however, note that Sundram produced
some merchandise comparable to that produced by the company examined. See id. The
preliminary determination in this case likewise noted that Sundram produced some comparable
merchandise, but declined to use its financial statements because Sundram neither produced nor
sold this merchandise in Oman. Certain Steel Nails From the Sultanate of Oman: Affirmative
Preliminary Determination of Sales at Less Than Fair Value and Postponement of Final
Determination, 79 Fed. Reg. 78,034 (Dec. 29, 2014); Decision Memorandum for the Preliminary
Determination in the Antidumping Duty Investigation: Certain Steel Nails From the Sultanate of
Oman, A-523-808, POI 04/01/2013-03/31/2014, at Part XIV.B (Dep’t Commerce Dec. 17, 2014)
18
In the final determination of this investigation, Commerce did not use Sundram’s financial
statements primarily because it had financial statements on record from companies that produced
comparable merchandise in Taiwan. Certain Steel Nails From Taiwan: Final Determination of
Sales at Less Than Fair Value, 80 Fed. Reg. 28,959 (May 20, 2015); Issues and Decision
Memorandum for the Affirmative Final Determination in the Less than Fair Value Investigation
of Certain Nails from Taiwan, A-583-854, POI 04/01/2013-03/31/2014, at Comment 1 (Dep’t
Commerce May 13, 2015). Likewise, in the preliminary determination, Commerce did not use
any of the record data sets, and chose not to use Sundram because it does not sell or produce in
(continued…)
PUBLIC OPINION
Consol. Court No. 12-00065 Page 19
The Court of International Trade opinion cited by Plaintiffs merely referenced Certain Steel
Nails From the Sultanate of Oman, and made no judgment on Sundram's product comparability.
The court simply noted Commerce's initial decision. 20 All of the investigations cited by
Plaintiffs acknowledge that Sundram produced a certain amount of goods comparable to the steel
nails in question.
Notably, “Commerce [does] not rely on decisions made regarding comparability of
merchandise from outside the period of review.” Commerce Response at 26. Commerce may
make different decisions at different times and they may all be supported. Further, it would
“defeat the whole purpose of having set periods of review for the administration of the
antidumping order,” NSK Ltd. v. United States, 510 F.3d 1375, 1381–82 (Fed. Cir. 2007)
(concerning the inclusion of billing adjustments which occurred outside the period of review), if
other records must also be considered.
Commerce weighed the three criteria, some of which were more persuasive than others,
and found that Sundram’s merchandise was sufficiently comparable to that of the NME
producer, such that Sundram’s financial statements could be averaged with those of Bansidhar.
Taiwan. Certain Steel Nails From Taiwan: Negative Preliminary Determination of Sales at Less
Than Fair Value and Postponement of Final Determination, 79 Fed. Reg. 78,053 at 9 (Dec. 29,
2014); Decision Memorandum for the Preliminary Determination in the Antidumping Duty
Investigation of Certain Steel Nails from Taiwan, A-583-854, POI 04/01/2013-03/31/2014, at
Part VII.E (Dep’t Commerce Dec. 17, 2014).
19
Certain Steel Nails From the Republic of Korea: Affirmative Preliminary Determination of
Sales at Less Than Fair Value and Postponement of Final Determination, 79 Fed. Reg. 78,051 at
13 (Dec. 29, 2014); Decision Memorandum for the Preliminary Determination in the
Antidumping Duty Investigation: Certain Steel Nails From the Republic of Korea, A-580-874,
POI 04/01/2013-03/31/2014, at Part XIV.B (Dep’t Commerce Dec. 17, 2014).
20
Mid Continent Steel & Wire, Inc. v. United States, 2017 Ct. Intl. Trade LEXIS 19, 23-25 (Ct.
Int'l Trade Jan. 26, 2017) (referencing 80 Fed. Reg. 28,972).
PUBLIC OPINION
Consol. Court No. 12-00065 Page 20
Accordingly, the court concludes that Commerce’s decision is supported by substantial evidence
and is in accordance with law.
IV. Commerce’s Decision to Apply Neutral Facts Available to Jinchi
In Itochu, the court held that Commerce improperly applied AFA to Jinchi for its failure
to report FOP data from an unaffiliated supplier because Commerce never made a finding that
Jinchi failed to cooperate. Id. at *16. Instead, record evidence showed that Jinchi continued to
work with Commerce to provide the requested data. Id. The court also held that Commerce
failed to conduct the necessary case-specific analysis to determine whether it was appropriate to
apply an inference adverse to Jinchi for its unaffiliated supplier’s failure to cooperate. Id.
Accordingly, the court remanded the issue of whether application of AFA to the
unaffiliated supplier was appropriate. Id. at *17. The court specifically directed Commerce to
reconsider its application of a partial AFA margin to Jinchi for the missing information
pertaining to Jinchi’s unaffiliated supplier, [[ ]]. Id. Commerce was given two options:
(1) explain why application of AFA to Jinchi, a fully cooperating party, is appropriate; or (2)
apply a neutral facts available margin to Jinchi. Id. at *16.
On remand, Commerce acted within its discretion and reasonably applied neutral facts
available to Jinchi. Commerce found that: (1) these hard cut nails represent an insignificant
quantity of Jinchi's total quantity of subject merchandise sales to the U.S. during the POR (not a
supermajority of the sales as initially thought); and (2) a majority of the other SVs are
significantly lower than the value applied as AFA to Jinchi's hard-cut masonry nails. Remand
Results at 33–34.
Commerce noted in its Final Results that it “could have chosen to excuse Jinchi from
reporting the sales and missing FOPs . . . from this unaffiliated supplier as an insignificant
CONFIDENTIAL INFORMATION OMITTED
PUBLIC OPINION
Consol. Court No. 12-00065 Page 21
quantity, if Jinchi [had] made such a request.” Id. at 33. Commerce explained that because
Jinchi did not ask to be excused, Commerce initially resorted to applying AFA. Id. Commerce
failed to consider, however, that a reason Jinchi did not request this relief was because they were
actively attempting to obtain the requested information from their supplier. See Pl. Cmts. at 7.
Recognizing Jinchi’s lack of success in this regard, Commerce sent its own questionnaire to the
supplier. Remand Results at 31–32.
To further justify its original decision, Commerce cites Mueller Commercial de Mex., S.
de R.L. de C.V. v. United States. Remand Results at 51–52. In that case, however, the supplier,
Ternium, was also a potential mandatory respondent given its own high volume of exports to the
United States. 753 F.3d 1227, 1229 (Fed. Cir. 2014). Due to this high volume, Commerce
applied AFA as a negative incentive to induce Mueller’s cooperation. Id. at 1235. In contrast,
[[ ]] operations do not include any shipments to the United States, it is unable to provide
financials to Commerce apparently because it does not have regular accounting, and it only
employs 30 people, all facts which point to the insignificant size of [[ ]] operations.
Second Administrative Review of Certain Nails from the People’s Republic of China: Factors of
Production for certain nails exported by Jinchi which were produced by [[
]], A-570-909, POR 08/31/2009-07/31/2010, at 2 and Attach.1 (Dep’t of
Commerce Sept. 28, 2011) (“FOP Letter”). Furthermore, Mueller makes clear that particular
facts are necessary to apply AFA to a cooperating party based on a non-affiliated supplier’s
conduct. See 753 F.3d at 1233.
Turning to Commerce’s new determination, given the insignificant amount of product
involved, there is no likelihood of control by Jinchi or a motivation to evade as in Mueller, so
factors that might warrant AFA based on a non-affiliate’s conduct are missing. Id. at 1235. “If
CONFIDENTIAL INFORMATION OMITTED
PUBLIC OPINION
Consol. Court No. 12-00065 Page 22
the cooperating entity has no control over the non-cooperating suppliers, a resulting adverse
inference is potentially unfair to the cooperating party.” Id. (citing SKF USA Inc. v. United
States, 630 F.3d 1365, 1375 (Fed. Cir. 2011)).
Mid Continent’s argument that Jinchi had sufficient control over its supplier simply
because it had an ongoing business relationship with the supplier, Def.-Int. Cmts. at 11, is
unpersuasive. Under such a standard, it would be impossible to separate respondents who have
control from those that do not. Mid Continent’s assertion that [[ ]], as a rational business,
would supply the records upon inducement by Jinchi ignores [[ ]] lack of proper
accounting and small size.
Moreover, the evidence shows that Jinchi did in fact attempt to apply pressure to its
producer. The record indicates that Jinchi actually tried to induce its supplier to provide the
records, stating “[w]hether your company provides the help will influence our willingness to
continue to do business with your company.” FOP Letter, at Attach.1. That [[ ]] still
refused to cooperate, arguing that “the requirements of the questionnaire [were] far beyond [its]
ability,” suggests Jinchi exercised insufficient control over the supplier to induce its cooperation.
Id. For these reasons, the court concludes that Commerce’s application of neutral facts on
remand is supported by substantial evidence and is in accordance with law.
CONCLUSION
For the foregoing reasons, the court sustains Commerce’s Remand Results.
/S/ Jane A. Restani
Jane A. Restani
Judge
Dated: March 22, 2018
New York, New York