United Steel and Fasteners, Inc. v. United States

Slip Op. 17- 2
UNITED STATES COURT OF INTERNATIONAL TRADE
UNITED STEEL AND FASTENERS,
INC.,
Plaintiff,
v.
UNITED STATES,
Before: Jennifer Choe-Groves, Judge
Defendant,
Court No. 13-00270
and
SHAKEPROOF ASSEMBLY
COMPONENTS DIVISION OF ILLINOIS
TOOL WORKS INC.,
Defendant-Intervenor.
OPINION AND ORDER
[Sustaining in part and remanding in part the U.S. Department of Commerce’s final scope ruling
on American Railway Engineering and Maintenance-of-Way Association washers.]
Dated: January 11, 2017
Edward Brian Ackerman and Ned Herman Marshak, Grunfeld Desiderio Lebowitz Silverman &
Klestadt, LLP, of New York, N.Y. and Washington, D.C., argued for plaintiff United Steel and
Fasteners, Inc. With them on the brief was Kavita Mohan.
Michael Damien Snyder, Trial Attorney, Commercial Litigation Branch, Civil Division, U.S.
Department of Justice, of Washington, D.C., argued for defendant United States. With him on
the brief were Stuart F. Delery, Assistant Attorney General, Jeanne E. Davidson, Director, and
Patricia M. McCarthy, Assistant Director. Of counsel on the brief was Joanna Victoria Theiss,
Attorney, Office of the Chief Counsel for Trade Enforcement and Compliance, U.S. Department
of Commerce, of Washington D.C.
Raymond Paul Paretzky and David John Levine, McDermott, Will & Emery, LLC, of
Washington D.C., argued for defendant-intervenor Shakeproof Assembly Components Division
of Illinois Tool Works Inc.
Court No. 13-00270 Page 2
Choe-Groves, Judge: This is a case of first impression with respect to whether the U.S.
Department of Commerce (“Commerce” or “Department”) may retroactively suspend liquidation
after issuing an affirmative scope ruling if liquidation has not been suspended previously.
Plaintiff United Steel and Fasteners, Inc. (“Plaintiff” or “US&F”) brings this action contesting
Commerce’s final scope ruling on American Railway Engineering and Maintenance-of-Way
Association (“AREMA”) washers, which found that AREMA washers are within the scope of
the antidumping duty order covering certain helical spring lock washers from the People’s
Republic of China (“China”). See Helical Spring Lock Washers from the People’s Republic of
China: Final Scope Ruling on Request from United Steel and Fasteners, Inc., PD 12, bar code
3144783-01 (July 10, 2013) (“Final Scope Ruling”); see also Certain Helical Spring Lock
Washers From the People’s Republic of China, 58 Fed. Reg. 53,914 (Dep’t Commerce Oct. 19,
1993) (antidumping duty order), as amended, 58 Fed. Reg. 61,859 (Dep’t Commerce Nov. 23,
1993) (amended final determination and amended antidumping duty order) (“Order”). This
matter is before the court on Plaintiff’s Rule 56.2 motion for judgment on the agency record
challenging Commerce’s scope determination and instructions to U.S. Customs and Border
Protection (“Customs” or “CBP”) regarding the suspension of liquidation. See Pl.’s Rule 56.2
Mot. J. Upon Agency R., Dec. 20, 2013, ECF No. 23; Br. Supp. Pl.’s Rule 56.2 Mot. J. Upon
Agency R., Dec. 20, 2013, ECF No. 23 (“US&F Br.”). For the reasons discussed below, the
court concludes that although Commerce’s scope determination is supported by substantial
evidence, this case must be remanded because Commerce unlawfully instructed Customs to
suspend liquidation of Plaintiff’s entries of AREMA washers retroactively.
Court No. 13-00270 Page 3
BACKGROUND
On September 8, 1992, Shakeproof Assembly Components Division of Illinois Tool
Works Inc. (“Shakeproof”), a domestic producer of washers and Defendant-Intervenor in this
action, filed a petition for the imposition of antidumping duties on imports of certain helical
spring lock washers from China. See Certain Helical Spring Lock Washers From the People’s
Republic of China: Scope Ruling Request (AREMA Washers) at Attach. 10, PD 1–2, bar codes
3129510-01–02 (Apr. 9, 2013) (“Petition”). After examining the Petition, Commerce initiated an
antidumping duty investigation. See Certain Helical Spring Lock Washers From the People’s
Republic of China and Taiwan, 57 Fed. Reg. 45,765, 45,767 (Dep’t Commerce Oct. 5, 1992)
(initiation of antidumping duty investigations).1
Commerce and the U.S. International Trade Commission (“ITC”) determined that certain
helical spring lock washers from China were sold, or were likely to be sold, in the United States
at less than fair value and the domestic industry was materially injured or threatened with
material injury due to imports of such merchandise. See Certain Helical Spring Lock Washers
From the People’s Republic of China, 58 Fed. Reg. 48,833, 48,833 (Dep’t Commerce Sept. 20,
1993) (final determination of sales at less than fair value); Certain Helical Spring Lockwashers
From the People’s Republic of China, 58 Fed. Reg. 53,747, 53,747 (Int’l Trade Comm’n Oct. 18,
1993); Certain Helical Spring Lockwashers From the People’s Republic of China, USITC Pub.
2684, Inv. No. 731-TA-624 (October 1993) (“ITC Report”). Accordingly, Commerce published
1
Shakeproof petitioned for the imposition of antidumping duties on imports of certain helical
spring lock washers from both China and Taiwan. See Petition. Commerce simultaneously
initiated separate antidumping duty investigations for both countries. This action, however, only
concerns the antidumping duty order resulting from the investigation of imports from China.
Court No. 13-00270 Page 4
an antidumping duty order on certain helical spring lock washers from China on October 19,
1993.2 See Order, 58 Fed. Reg. at 53,915. The scope of the Order provides the following
description of the subject merchandise:
[C]ertain helical spring lock washers (HSLWs) are circular washers of carbon
steel, of carbon alloy steel, or of stainless steel, heat-treated or non heat-treated,
plated or non-plated, with ends that are off-line. HSLWs are designed to: (1)
Function as a spring to compensate for developed looseness between the
component parts of a fastened assembly; (2) distribute the load over a larger area
for screws or bolts; and (3) provide a hardened bearing surface. The scope does
not include internal or external tooth washers, nor does it include spring lock
washers made of other metals, such as copper. The lock washers subject to this
investigation are currently classifiable under subheading 7318.21.0000 of the
Harmonized Tariff Schedule of the United States (HTSUS). Although the
HTSUS subheadings are provided for convenience and customs purposes, our
written description of the scope of this investigation is dispositive.3
Id. at 53,914–15.
Plaintiff imports washers that are designed to meet the standards and specifications of
AREMA, which is the successor industry association to the American Railway Engineering
Association (“AREA”). On April 9, 2013, Plaintiff submitted an application for Commerce to
issue a determination that AREMA washers are not covered by the scope of the Order. See
2
Commerce later amended its final determination and the antidumping duty order to correct
certain ministerial errors made in the final calculation of the antidumping duty margin. See
Certain Helical Spring Lock Washers From the People’s Republic of China, 58 Fed. Reg. at
61,859. The amendments did not affect the class or kind of merchandise covered by the scope.
3
Commerce has since clarified that merchandise subject to the Order is also classifiable under
subheading 7318.21.0030 of the Harmonized Tariff Schedule of the United States. See Certain
Helical Spring Lock Washers From Taiwan and the People’s Republic of China, 76 Fed. Reg.
61,343, 61,343 (Dep’t Commerce Oct. 4, 2011) (final results of the expedited third five-year
sunset reviews of the antidumping duty orders); Certain Helical Spring Lock Washers From
Taiwan and the People’s Republic of China, 76 Fed. Reg. 75,873, 75,873 (Dep’t Commerce Dec.
5, 2011) (continuation of antidumping duty orders). The scope language remains the same in all
other respects.
Court No. 13-00270 Page 5
Certain Helical Spring Lock Washers From the People’s Republic of China: Scope Ruling
Request (AREMA Washers), PD 1–2, bar codes 3129510-01–02 (“Scope Application”).
Plaintiff noted in its scope application that it had been importing AREMA washers under
Harmonized Tariff Schedule of the United States (“HTSUS”) subheading 7318.21.0090 without
declaring the entries subject to antidumping duties, and that Customs had not assessed
antidumping duties on Plaintiff’s entries. See id. at 5, 5 n.2.
Plaintiff argued in its application that AREMA washers are excluded from the scope of
the Order because: (1) AREMA washers only have modest helicality and are not known as
helical washers in the industry; (2) AREMA washers are usually manufactured to have square or
rectangular cross-sections; (3) the Petition and the ITC Report only reference washers that meet
American Society for Mechanical Engineers (“ASME”) standards and specifications; (4) the ITC
Report does not specify that subject helical spring lock washers are for railroad or railway use;
(5) AREMA washers are neither coated nor plated; (6) AREMA washers are between 50–130%
thicker than subject helical spring lock washers; and (7) AREMA washers are subject to a
“permanent set” manufacturing process that flattens the washer surface and minimizes the
helicality of the washer. See id. at 3–5, 10–14. Plaintiff also argued that AREMA washers are
distinct from the subject merchandise, as evidenced by the physical characteristics of the
product, the expectations of the ultimate purchasers, ultimate use of the product, channels of
trade in which the product is sold, and the manner in which the product is advertised and
displayed. See id. at 14–19.
On May 2, 2013, Shakeproof responded by requesting that Commerce issue a final ruling
that AREMA washers are included within the scope of the Order. See Certain Helical Spring
Court No. 13-00270 Page 6
Lock Washers from China; Response to Application for Scope Ruling, PD 5, bar code 3133528-
01 (May 2, 2013). Shakeproof argued that Plaintiff’s imports were not a different class of
merchandise, but rather a subcategory of subject helical spring lock washers known as track
washers. See id. at 1, 3–7. Shakeproof also requested that Commerce instruct Customs to
suspend liquidation and require cash deposits for all entries of AREMA washers retroactive to
the first day of the current administrative review period, October 1, 2012. Id. at 2, 7–9.
Plaintiff and Shakeproof filed supplemental submissions to support their respective
positions. See Certain Helical Spring Lock Washers From the People’s Republic of China:
Scope Ruling Request (AREMA Washers) Reply to Petitioners 5/2/13 Submission, PD 7, bar
code 3134791-01 (May 9, 2013); Certain Helical Spring Lock Washers from China; Response to
US&F Letter of May 9, PD 8, bar code 3138466-01 (June 3, 2013); US&F Comments on
Petitioner’s Supplemental Response in Certain Helical Spring Lock Washers From the People’s
Republic of China Scope Inquiry (AREMA Washers), PD 11, bar code 3141411-01 (June 21,
2013).
On July 10, 2013, Commerce issued a final scope ruling determining that AREMA
washers were included within the scope of the Order because the “evidence in the Scope Request
as well as in the Petition, the record of the initial investigation, and the determinations of the
Department and the ITC, demonstrates that the design of AREMA washers facilitates the same
functionality characteristics of helical spring lock washers as described by the scope of the
Order.”4 Final Scope Ruling at 5–6. Commerce also determined that retroactive suspension of
4
According to 19 C.F.R. § 351.225(c), within 45 days after receiving an application for a scope
(footnote continued)
Court No. 13-00270 Page 7
liquidation was reasonable because it had not initiated a scope inquiry under 19 C.F.R.
§ 351.225(e) (2013).5 See id. at 7–9. The Department noted that “the language used when
[Commerce] first instructed CBP to suspend liquidation of helical spring lock washers following
the preliminary determination in the investigation clearly demonstrates that US&F’s product
should always have been suspended.” Id. at 7–8. Consequently, Commerce added HTSUS
subheading 7318.21.0090 to the scope of the Order and instructed Customs to collect cash
deposits and suspend liquidation of all unliquidated entries of AREMA washers retroactive to
October 1993, which is the date Commerce first suspended liquidation of subject merchandise
for antidumping purposes. See id. at 9; see also Certain Helical Spring Lock Washers From the
People’s Republic of China, 58 Fed. Reg. 26,112, 26,115 (Dep’t Commerce Apr. 30, 1993)
(notice of preliminary determination of sales at less than fair value) (directing Customs to
suspend liquidation); Order, 58 Fed. Reg. at 53,915 (modifying the date entries were first subject
to suspension of liquidation).
Plaintiff contests Commerce’s interpretation of the scope of the Order, as well as
Commerce’s instructions to Customs to retroactively suspend liquidation of all unliquidated
ruling, Commerce must either issue a final scope ruling pursuant to 19 C.F.R. § 351.225(d) or, if
further inquiry is necessary, initiate a scope inquiry under 19 C.F.R. § 351.225(e). 19 C.F.R.
§ 351.225(c)(2). Because Plaintiff submitted its scope ruling application on April 9, 2013,
Commerce was required to act on Plaintiff’s application by May 24, 2013. However, on May 9,
2013 Commerce determined that it required additional time to review the application and
responses before deciding whether to issue a final scope ruling or initiate a scope inquiry under
19 C.F.R. § 351.225(e). See Letter From IA to All Interested Parties Extending Deadline, PD 6,
bar code 3134686-01 (May 9, 2013). Pursuant to 19 C.F.R. § 351.302(b), Commerce extended
the deadline to act on Plaintiff’s application and issued its Final Scope Ruling on July 10, 2013.
See id.
5
Further citations to Title 19 of the Code of Federal Regulations are to the 2013 edition.
Court No. 13-00270 Page 8
entries dating back to 1993. See US&F Br. 12–38. Plaintiff seeks a remand of the final scope
ruling with instructions for Commerce to determine that AREMA washers are excluded from the
scope of the Order, or alternatively, to initiate a scope inquiry under 19 C.F.R. § 351.225(e) and
withdraw the suspension instructions. See id. Defendant argues that Commerce’s final scope
ruling is supported by substantial evidence and in accordance with the law. Def.’s Resp. Pl.’s
Mot. J. Upon Agency R. 7–24, Apr. 10, 2014, ECF No. 31 (“Def. Resp.”). The court held oral
argument on October 25, 2016 on the motion for judgment on the agency record. See Oral
Argument, Oct. 25, 2016, ECF No. 52.
JURISDICTION AND STANDARD OF REVIEW
The court has jurisdiction pursuant to 28 U.S.C. § 1581(c) (2012). The court will uphold
a determination by Commerce unless it is “unsupported by substantial evidence on the record, or
otherwise not in accordance with law.” Section 516A(b)(1)(B)(i) of the Tariff Act of 1930, as
amended, 19 U.S.C. § 1516a(b)(1)(B)(i) (2012);6 see also NSK Ltd. v. United States, 510 F.3d
1375, 1379 (Fed. Cir. 2007). “‘Substantial evidence . . . means such relevant evidence as a
reasonable mind might accept as adequate to support a conclusion.’” A.L. Patterson, Inc. v.
United States, 585 Fed. Appx. 778, 781–82 (Fed. Cir. 2014) (quoting Consol. Edison Co. of N.Y.
v. NLRB, 305 U.S. 197, 229 (1938)).
6
Further citations to the Tariff Act of 1930, as amended, are to the relevant provisions of Title
19 of the U.S. Code, 2012 edition.
Court No. 13-00270 Page 9
DISCUSSION
I. Commerce’s Scope Determination
Plaintiff argues that Commerce’s scope determination is neither supported by substantial
evidence nor in accordance with the law. Plaintiff submits that its AREMA washers are
excluded from the scope of the Order based on analyses of the plain scope language and 19
C.F.R. § 351.225(k)(1) and (k)(2). See US&F Br. 12–32. Defendant argues that Commerce
reasonably concluded that AREMA washers are within the scope of the Order according to the
scope language, the application for a scope ruling, and the descriptions of subject merchandise
contained in the (k)(1) sources. See Def. Resp. 7–18. Defendant argues further that Commerce
determined that the descriptions of the merchandise from the (k)(1) sources are dispositive as to
whether AREMA washers are covered by the scope of the Order, and as a result, Commerce
properly ended its analysis and did not need to initiate a scope inquiry pursuant to 19 C.F.R.
§ 351.225(e). See id. at 18–19.
The scope of an antidumping order may need clarification at times “because the
descriptions of subject merchandise contained in the Department’s determinations must be
written in general terms.” 19 C.F.R. § 351.225(a). To clarify the scope of an order, Commerce’s
regulations authorize the agency to interpret an antidumping duty order and issue scope rulings
that address whether particular products are covered by the scope. See id. If an interested party
submits an application requesting for Commerce to clarify whether the scope of an order covers
particular merchandise, Commerce must either issue a final scope ruling pursuant to 19 C.F.R.
351.225(d) or formally initiate a scope inquiry pursuant to 19 C.F.R. § 351.225(e) within forty-
five days after receiving the application for a scope ruling. 19 C.F.R. § 351.225(c)(2).
Court No. 13-00270 Page 10
Commerce may forego an inquiry and issue a final scope ruling if it can determine whether a
product is included or excluded from the scope of an order based solely upon the application for
a scope ruling and the descriptions of subject merchandise contained in the petition, the
underlying investigation, and determinations made by Commerce and the ITC. See 19 C.F.R.
§ 351.225(d), (k)(1). Commerce is given significant deference in interpreting and clarifying an
antidumping duty order. See Ericsson GE Mobile Comm’ns, Inc. v. United States, 60 F.3d 778,
782 (Fed. Cir. 1995) (citing Smith Corona Corp. v. United States, 915 F.2d 683, 686 (Fed. Cir.
1990)), as corrected on reh’g (Sept. 1, 1995).
Here, Commerce issued its final scope ruling pursuant to 19 C.F.R. § 351.225(d).
Commerce determined that the scope language of the Order can be reasonably interpreted to
include AREMA washers because “evidence in the Scope Request as well as in the Petition, the
record of the initial investigation, and the determinations of the Department and the ITC,
demonstrates that the design of AREMA washers facilitates the same functionality
characteristics of helical spring lock washers as described by the scope of the Order.” Final
Scope Ruling at 5–6. As set forth below, Commerce’s scope determination was supported by
substantial evidence.
A. The Plain Language of the Order
In determining whether certain merchandise is included within the scope of an
antidumping duty order, Commerce must first look to the plain language of the order. See
Duferco Steel, Inc. v. United States, 296 F.3d 1087, 1097 (Fed. Cir. 2002). If Commerce
determines that the scope language is unambiguous and clear regarding the merchandise in
question, then it explains what it understands to be the plain meaning of the scope and the
Court No. 13-00270 Page 11
inquiry ends there. See ArcelorMittal Stainless Belg. N.V. v. United States, 694 F.3d 82, 84
(Fed. Cir. 2012).
The scope of the Order provides the following description of the subject merchandise:
For purposes of this investigation, certain helical spring lock washers (HSLWs)
are circular washers of carbon steel, of carbon alloy steel, or of stainless steel,
heat-treated or non heat-treated, plated or non-plated, with ends that are off-line.
HSLWs are designed to: (1) Function as a spring to compensate for developed
looseness between the component parts of a fastened assembly; (2) distribute the
load over a larger area for screws or bolts; and (3) provide a hardened bearing
surface. The scope does not include internal or external tooth washers, nor does it
include spring lock washers made of other metals, such as copper. The lock
washers subject to this investigation are currently classifiable under subheading
7318.21.0000 of the Harmonized Tariff Schedule of the United States (HTSUS).
Although the HTSUS subheadings are provided for convenience and customs
purposes, our written description of the scope of this investigation is dispositive.
Order, 58 Fed. Reg. at 53,914–15.
In its application for a scope ruling, Plaintiff described AREMA washers as “spring
washers utilized exclusively for joining continuous lengths of railway rails, as parts of nut and
bolt assemblies that pass through connecting bars to the rails known as joint bars,” which “are
made to the specifications of the professional association known as American Railway
Engineering and Maintenance-of-Way Association and it is for this reason that they are known as
‘AREMA’ washers or AREA washers.” Scope Application at 3 (internal footnote omitted).
Plaintiff explained that AREMA washers “may appear to resemble the helical washers” subject
to the Order, see id. at 4, but identified numerous aspects in which AREMA washers and subject
washers differ to demonstrate that the two are distinct products and that AREMA washers are
outside the scope of the Order. See id. at 3–5, 10–14. Commerce could not determine from the
plain language of the Order alone whether AREMA washers were included within the class or
Court No. 13-00270 Page 12
the kind of merchandise that is subject to the Order. The scope language left it unclear whether
AREMA washers are “helical” and if so, whether AREMA washers are the type of helical spring
lock washers covered by the Order.
B. Commerce’s Analysis of the Application and the (k)(1) Sources
Because the plain scope language was ambiguous with respect to AREMA washers,
Commerce conducted an interpretive analysis under 19 C.F.R. § 351.225(k)(1), which instructs
Commerce to proceed as follows:
(k) Other scope determinations. . . . [I]n considering whether a particular product
is included within the scope of an order or a suspended investigation, [Commerce]
will take into account the following:
(1) The descriptions of the merchandise contained in the petition,
the initial investigation, and the determinations of [Commerce]
(including prior scope determinations) and the Commission.
19 C.F.R. § 351.225(k)(1); see also Duferco, 296 F.3d at 1097 (“[A] predicate for the
interpretive process is language in the order that is subject to interpretation.”). The analysis ends
at this stage if the descriptions of the merchandise from these sources are dispositive.7 In this
case, Commerce reasonably found the evidence from Plaintiff’s scope ruling application and the
7
If the evidence from the application for a scope ruling and the descriptions of the subject
merchandise from the (k)(1) sources are not dispositive, Commerce turns to the considerations
under (k)(2), which are drawn from the factors set forth in Diversified Prods. Corp. v. United
States, 6 CIT 155, 162, 572 F. Supp. 883, 889 (1983):
(2) When the above criteria are not dispositive, [Commerce] will further consider:
(i) The physical characteristics of the product;
(ii) The expectations of the ultimate purchasers;
(iii) The ultimate use of the product;
(iv) The channels of trade in which the product is sold; and
(v) The manner in which the product is advertised and
displayed.
19 C.F.R. § 351.225(k)(2).
Court No. 13-00270 Page 13
descriptions of the subject merchandise contained in the (k)(1) sources to be dispositive on the
issue of whether AREMA washers are subject to the Order.
Commerce considered whether AREMA washers are “helical” spring lock washers
according to the scope of the Order. See Final Scope Ruling at 4–5. The Department examined
the Petition and found that “the designation of ‘helical’ is both a description of appearance, i.e.,
in the form of a helix, and a spring-like attribute or locking function to prevent loosening which
is present when the helix is compressed.” Id. at 4 (citing Petition at 5–6). Based on its
understanding, Commerce found that the “pictures provided by US&F clearly show the helical
aspect of AREMA washers.” Id. at 5 (citing Scope Application at Attach. 2). The Department
additionally found that other features of AREMA washers (i.e., square or rectangular cross-
sections and permanent set process), which are discussed in further detail below, might have the
effect of diminishing the helicality of the washer, but AREMA washers nevertheless retain their
helicality to a lesser degree. See id. at 4–5. For that reason, Commerce determined that the fact
“the design and function of [Plaintiff’s] AREMA washers minimalize this ‘helical’ characteristic,
or that there is no reference to the ‘helical’ name” does not strip AREMA washers of their helical
function.8 Id. Moreover, Plaintiff conceded in its application that the characteristics of AREMA
8
Commerce also noted that “AREMA washers are referred to as ‘spring washers’ throughout
US&F’s supporting material, which would suggest a similar, not distinct, design/function from
subject washers.” Final Scope Ruling at 4. Plaintiff asserts Commerce “suggests that because
‘US&F does not dispute the fact that AREMA washers are ‘spring washers,’ AREMA washers
are therefore ‘helical’ spring lock washers.” US&F Br. 24. Plaintiff argues that Commerce’s
conclusion here is unsupported by substantial evidence because not all spring washers are
covered by the scope of the Order and, in fact, the ITC stated that the tariff provision covering
subject merchandise also includes non-helical spring lock washers. Id. at 25 (citing Certain
Helical Spring Lockwashers from Taiwan, USITC Pub. 2651 at I-14, Inv. No. 731-TA-625 (June
(footnoted continued)
Court No. 13-00270 Page 14
washers act in a way that minimalize the helicality of the washer, implying that the washers are
helical. See Scope Application at 4–5.
Commerce addressed whether AREMA washers are the type of helical spring lock
washers covered by the Order. See Final Scope Ruling at 4–5. The Department identified
language in the Petition expressly providing that “[a] significant portion of the larger sizes [of
helical spring lock washers] are used for installation of railroad tracks.”9 Id. at 5 (citing Petition
at 3). As previously stated, AREMA washers are used exclusively for the installation of railroad
tracks. See Scope Application at 3. Commerce found that “the Order covers washers of various
steel qualities” and “the Order covers coated and non-coated washers,” dismissing the notion
that AREMA washers are excluded from the Order because they are made of high grade steel
and do not have any coating or plating. Final Scope Ruling at 5. Commerce concluded that
1993)). However, even accepting Plaintiff’s argument does not undermine Commerce’s
conclusion because Commerce relied on other evidence from the scope application and the (k)(1)
sources to conclude that AREMA washers are helical.
9
The court acknowledges that the language in the final order, not the sources provided for under
19 C.F.R. § 351.225(k)(1), reflects what merchandise is included within and excluded from the
scope. Duferco, 296 F.3d at 1096–97. However, “the (k)(1) sources are afforded primacy in the
scope analysis . . . because interpretation of the language used in the orders must be based on the
meaning given to that language during the underlying investigations.” Fedmet Resources Corp.
v. United States, 755 F.3d 912, 921 (Fed. Cir. 2014). The petition is among the sources that
Commerce may rely upon in interpreting the scope of an order. A petitioner is required to
describe all imported merchandise from which relief is sought, which dictates the merchandise
that Commerce and the ITC investigate in an antidumping duty investigation. Here, the petition
made references to washers that are specifically designed for the installation of railroad tracks.
See Petition at 3. Commerce was unable to find any information from the Petition, the record of
the investigation, or Commerce’s and the ITC’s prior determinations indicating that such
washers are excluded from the merchandise subject to the Order. Moreover, the final scope of
the Order is virtually identical to the merchandise described in the scope of the investigation,
which further supports an interpretation that relies in part on the description of subject
merchandise as described in the petition.
Court No. 13-00270 Page 15
AREMA washers fall within the parameters of the Order because AREMA washers possess the
physical and functional characteristics described by the scope. See id. at 5–6. Commerce’s
conclusion that AREMA washers are covered by the scope of the Order is supported by
substantial evidence.
C. Plaintiff’s Challenges to the Final Scope Ruling
It is Plaintiff’s position, however, that AREMA washers are not subject to the Order
because they are neither “helical” nor the type of spring lock washers that are contemplated by
the scope. See US&F Br. 15–28. Plaintiff maintains that the descriptions of subject merchandise
from the (k)(1) sources demonstrate that AREMA washers are excluded from the scope. See id.
at 19–22. Specifically, Plaintiff argues that the (k)(1) sources show that the subject merchandise,
unlike AREMA washers, (1) are made to the specifications of ASME, see id. at 20–21, (2) are
manufactured to have trapezoidal cross-sections, see id. at 19–20, (3) range in thickness from
approximately one-tenth of an inch to three inches for regular, heavy, and extra-duty washers,
see id. at 22, and (4) are not subject to a “permanent set” manufacturing process to flatten the
washer surface. See id. Commerce addressed each of these arguments in its final scope ruling
and reasonably determined that these characteristics do not exclude AREMA washers from the
scope of the Order.
First, Commerce considered whether the scope of the Order only covers merchandise
designed to meet certain industry specifications. See Final Scope Ruling at 4. The washers at
issue are made to the specifications of AREMA and are used exclusively for the installation of
railroad tracks. See Scope Application at 3. Commerce observed that “neither the Order, nor
the Petition, nor the record of the initial investigation, nor the determinations of the Department
Court No. 13-00270 Page 16
and the ITC stipulate that helical spring lock washers with [AREMA] certifications are
excluded.” Final Scope Ruling at 4. The Department reasoned that the mere fact the
merchandise in question has been designed and certified by the railroad industry has no bearing
on whether the merchandise is subject to the Order. The scope language and the (k)(1) sources
thus support Commerce’s determination that AREMA certification does not render the
merchandise outside of the scope.10
Second, Commerce assessed whether the Order is limited only to helical spring lock
washers that are manufactured with a trapezoidal cross-section. See id. at 5. Commerce found
that “while certain record information suggests that helical spring lock washers generally are
trapezoidal, neither the scope of the Order nor any other evidence suggests that helical spring
lock washers always are trapezoidal.” Id. Based on this finding, Commerce reasonably
concluded that the shape of the unfinished wire used to produce the washer does not cause the
merchandise to fall outside of the scope so long as the merchandise retains “the spring or locking
function the helix provides.” Id.
Third, Commerce evaluated whether the Order only encompasses helical spring lock
washers with a thickness-to-diameter ratio of a particular range. See id. Commerce found that
the thickness of a washer “is simply a function of a washer’s application” and that “helical spring
lock washers generally include light, heavy, extra-duty, and high-collar varieties.” Id. (citing
10
Plaintiff argues that Commerce cannot use the absence of exclusionary language in the (k)(1)
sources as evidence to support its conclusion that AREMA washers are included within the scope
of the Order. US&F Br. 23 (citing ArcelorMittal, 694 F.3d at 88). The absence of exclusionary
language in the (k)(1) sources is not conclusive, but is evidence that AREMA certification
neither causes merchandise to fall within or outside the scope of the Order.
Court No. 13-00270 Page 17
Certain Helical Spring Lockwashers from Taiwan, USITC Pub. 2651 at I-5, Inv. No. 731-TA-
625 (June 1993) (“ITC Taiwan Report”) and Petition at 7).11 The Department also noted that
“‘[a] significant portion of the larger sizes are used for installation of railroad tracks,’” id.
(quoting Petition at 3), which is precisely the application that AREMA washers are designed for.
Commerce found no evidence suggesting that the thickness-to-diameter ratio of AREMA
washers renders the merchandise outside of the scope. Id. For these reasons, Commerce
reasonably determined that the Order covers washers with smaller and larger thickness-to-
diameter ratios.
Fourth, Commerce considered whether the Order also includes merchandise that
undergoes a permanent set process during production. See id. Commerce found that “this
design/specification is simply based on the function of the washer, whether the customer wants
the washer to lay flat when used.” Id. (citing Helical Spring Lock Washers from China and
Taiwan, USITC Pub. 4276 at I-6, Inv. Nos. 731-TA-624 and -625 (November 2011) and Helical
Spring Lock Washers From China and Taiwan, USITC Pub. 3858 at I-6, Inv. Nos. 731-TA-624
and -625 (June 2006)). The Department found that the square or rectangular cross-section,
coupled with the permanent set process, ensure that the AREMA washer “will lay flush when
11
In interpreting the scope of an order, Commerce may examine, among other sources, the
descriptions of the merchandise contained in determinations made by the ITC. See 19 C.F.R.
§ 351.225(k)(1). As a result, Commerce is allowed to look to the description of the merchandise
contained in the ITC’s injury determination from the antidumping duty investigation to
determine whether AREMA washers are included within the scope of the Order. However,
Commerce in part relied on the ITC’s injury determination from the antidumping duty
investigation of helical spring lock washers from Taiwan because the ITC incorporated by
reference the information collected in the Taiwan investigation for its injury determination in the
China investigation. See ITC Report at II-4.
Court No. 13-00270 Page 18
compressed to a closed position.” Id. (citing Scope Application at 4–5). Commerce reasonably
determined that this production process for AREMA washers affects the intended application of
railroad track installation, but does not change the function of the washer.
Plaintiff’s challenge to Commerce’s scope determination relies on the argument that
AREMA washers meet AREMA specifications rather than those set by ASME.12 Plaintiff’s
argument presumes, however, that the subject merchandise only includes washers that meet
ASME standards. Though the Petition and the ITC Report include references to ASME
standards and specifications in describing helical spring lock washers, see Petition at 7; ITC
Taiwan Report at I-5 n.5, Plaintiff acknowledged at oral argument that the evidence on the
record shows that the Order is not confined to helical spring lock washers conforming to ASME
standards and specifications. See Oral Argument at 00:03:44–00:04:30. As explained above,
Commerce reasonably interpreted the Order to cover helical spring lock washers without regard
to which association’s specifications the washers are designed to meet, as long as the washers
possess the physical and functional characteristics described in the scope.
12
Plaintiff argues that the scope of the Order only covers merchandise that is designed to meet
ASME specifications and standards, not AREMA. See US&F Br. 15–16, 20–21. For support,
Plaintiff notes (1) “[t]he AREMA manual section for washer specifications references ‘spring
washers’ but does not reference ‘helical even a single time . . . [and] the published ASME
standards of the Industrial Fasteners Institute reference the term ‘helical’ or [helical spring lock
washer] a total of 37 times,” id. at 16 (internal citations omitted), (2) Shakeproof submitted
ASME standards as an attachment to the Petition, id. at 16, 20 (citing Petition at App. 7), (3) the
Petition states that “[s]pecific dimensions and descriptions of helical spring lock washers are
provided by the American Society of Mechanical Engineers (‘ASME’) standards for lock
washers,” id. (quoting Petition at 7), (4) washers meeting AREMA standards were not referenced
in the Petition, id., and (5) the ITC injury determination from the antidumping duty investigation
refers to ASME specifications and standards and does not make any reference to AREMA. Id. at
21 (citing ITC Taiwan Report at I-5 n.5).
Court No. 13-00270 Page 19
Plaintiff also argues that the subject helical spring lock washers are used for general
fastening applications, which does not include an application specific to rails or railways. See
US&F Br. 21–22. Yet, the merchandise subject to the Order is used in many applications in a
number of different industries. As the Petition states,
[h]elical spring lock washers are primarily sold to original equipment
manufacturers (“OEMs”) that produce a wide variety of articles from automobiles
to lawn mowers, as well as equipment used by the armed services. A significant
portion of the larger sizes are used for installation of railroad tracks. A small
percentage of helical spring lock washers are sold to do-it-yourselfers in hardware
stores.
Petition at 3. It is reasonable for Commerce to determine that the scope includes merchandise
that is designed and certified for a particular application, such as the installation of railroad
tracks.
Plaintiff argues further that AREMA washers are not included within the scope of the
Order because AREMA washers and the merchandise subject to the Order are two distinct
products according to trade usage and industry practice. See US&F Br. 15–19, 23–27. Plaintiff
asserts that “‘antidumping orders should not be interpreted in a vacuum devoid of any
consideration of the way the language of the order is used in the relevant industry.’” Id. at 24
(quoting ArcelorMittal, 694 F.3d at 88). Commerce considered this claim and apparently could
not conclude that AREMA washers are excluded from the Order according to trade usage and
industry practice in light of the evidence on the record indicating otherwise. See Final Scope
Ruling at 4–6.
In interpreting scope language, Commerce must follow its regulatory procedures and
support its scope interpretation with “such relevant evidence as a reasonable mind might accept
Court No. 13-00270 Page 20
as adequate to support a conclusion.” Universal Camera Corp. v. NLRB, 340 U.S. 474, 477
(1951). As explained above, Commerce conducted an analysis according to its regulations and
reasonably interpreted the Order to include AREMA washers. The court finds that Commerce’s
scope determination is supported by substantial evidence and is in accordance with the law.13
II. Commerce’s Instructions to Suspend Liquidation Retroactively
Plaintiff contends that Commerce unlawfully instructed Customs to suspend liquidation
of unliquidated entries of AREMA washers retroactively, dating back to the issuance of the
Order in 1993.14 See US&F Br. 33–38. In response, Defendant argues that the instructions are
lawful because Commerce did not initiate a formal scope inquiry and determined that AREMA
washers have always been within the scope of the Order. See Def. Resp. 19–24. Though the
court affirms Commerce’s interpretation of the scope, Commerce’s instruction to Customs to
13
Plaintiff argues that an analysis of the (k)(2) criteria supports the exclusion of AREMA
washers. See US&F Br. 29–32. However, Commerce was able to resolve the scope issue based
on Plaintiff’s application for a scope ruling and the descriptions of the merchandise contained in
the (k)(1) sources. The court will not opine on the (k)(2) criteria because Commerce was not
required to consider the (k)(2) factors in this matter.
14
Commerce instructed Customs “to suspend liquidation of all unliquidated entries of
merchandise made on or after the first day merchandise subject to the Order was suspended for
antidumping purposes and collect cash deposits on all such entries.” Final Scope Ruling at 9.
The first day merchandise subject to the Order was suspended for antidumping purposes was
October 15, 1993. See Certain Helical Spring Lock Washers From the People’s Republic of
China, 58 Fed. Reg. at 26,115 (directing Customs to suspend liquidation); Order, 58 Fed. Reg. at
53,915 (modifying the date entries were first subject to suspension of liquidation). Though
Commerce’s suspension instructions in the final scope ruling effectively suspended liquidation
of AREMA washers retroactive to 1993, the instructions ostensibly only affect unliquidated
entries that are protected by the preliminary injunction in this action, which enjoined Commerce
from issuing instructions to liquidate and Customs from liquidating unliquidated entries of
AREMA washers from China that were entered or withdrawn from the warehouse between
October 1, 2011 and September 30, 2013. See Order, Nov. 15, 2013, ECF No. 22.
Court No. 13-00270 Page 21
retroactively suspend liquidation of AREMA washers is contrary to law because the instruction
exceeds Commerce’s regulatory authority.
Subsection (l) of 19 C.F.R. § 351.225 sets forth Commerce’s authority to suspend the
liquidation of merchandise subject to a scope proceeding as follows:
(l) Suspension of liquidation.
(1) When the Secretary conducts a scope inquiry under paragraph (b) or
(e) of this section, and the product in question is already subject to suspension of
liquidation, the suspension will be continued, pending a preliminary or a final
scope ruling, at the cash deposit rate that would apply if the product were ruled to
be included within the scope of the order.
(2) If the Secretary issues a preliminary scope ruling under paragraph
(f)(3) of this section to the effect that the product in question is included within
the scope of the order, any suspension of liquidation described in paragraph (l)(1)
of this section will continue. If liquidation has not been suspended, the Secretary
will instruct the Customs Service to suspend liquidation and to require a cash
deposit of estimated duties, at the applicable rate, for each unliquidated entry of
the product entered, or withdrawn from warehouse, for consumption on or after
the date of initiation of the scope inquiry. If the Secretary issues a preliminary
scope ruling to the effect that the product in question is not included within the
scope of the order, the Secretary will order any suspension of liquidation on the
product ended, and will instruct the Customs Service to refund any cash deposits
or release any bonds relating to that product.
(3) If the Secretary issues a final scope ruling, under either paragraph (d)
or (f)(4) of this section, to the effect that the product in question is included within
the scope of the order, any suspension of liquidation under paragraph (l)(1) or
(l)(2) of this section will continue. Where there has been no suspension of
liquidation, the Secretary will instruct the Customs Service to suspend liquidation
and to require a cash deposit of estimated duties, at the applicable rate, for each
unliquidated entry of the product entered, or withdrawn from warehouse, for
consumption on or after the date of initiation of the scope inquiry. If the
Secretary’s final scope ruling is to the effect that the product in question is not
included within the scope of the order, the Secretary will order any suspension of
liquidation on the subject product ended and will instruct the Customs Service to
refund any cash deposits or release and bonds relating to this product.
19 C.F.R. § 351.225(l). The Department must abide by the regulatory provision governing its
authority to suspend liquidation following affirmative final scope rulings, which instructs
Court No. 13-00270 Page 22
Commerce to suspend liquidation “on or after the date of initiation of the scope inquiry” if
liquidation has not already been suspended. 19 C.F.R. § 351.225(l)(3).
In the matter before this court, Commerce issued an affirmative final scope ruling
pursuant to 19 C.F.R. § 351.225(d) and entries of AREMA washers had not been previously
suspended. See Final Scope Ruling at 4–7. The Department explained that “a formal scope
inquiry [pursuant to 19 C.F.R. § 351.225(e)] was not initiated and so the regulations are silent
with respect to the date on which the Department should commence suspension of liquidation.”
Id. at 7. Commerce noted that it was “aware of no precedent matching the circumstances of this
scope review” and could not identify an instance where Commerce “has retroactively suspended
liquidation of entries not previously suspended pursuant to a final affirmative scope ruling
without having initiated a formal scope inquiry and with no on-going administrative review(s) of
the antidumping or countervailing duty order at issue.” Id. Notwithstanding this lack of
administrative precedent, the Department found that “19 CFR [§] 351.225(l)(3) does not
preclude suspension of liquidation on a date prior to ‘on or after the date of initiation of a scope
inquiry.’” Id. Based on this ambiguity in the regulation, Commerce reasoned that it could order
Customs to suspend liquidation of entries of AREMA washers retroactively. See id. at 9.
The court will sustain Commerce’s determinations unless they are “unsupported by
substantial evidence on the record, or otherwise not in accordance with the law.” 19 U.S.C.
§ 1516a(b)(1)(B)(i). An agency’s interpretation of its own regulations is given “‘controlling
weight unless it is plainly erroneous or inconsistent with the regulation,’” based on indications of
intent at the time of the regulation’s promulgation. Thomas Jefferson Univ. v. Shalala, 512 U.S.
504, 512 (1994) (quoting Bowles v. Seminole Rock & Sand Co., 325 U.S. 410, 414 (1945), and
Court No. 13-00270 Page 23
Gardebring v. Jenkins, 485 U.S. 415, 430 (1988)); see also Torrington Co. v. United States, 156
F.3d 1361, 1363–64 (Fed. Cir. 1998)). According to the regulatory history and prior case law,
Commerce’s suspension instructions exceeded the agency’s authority.
A. Regulatory History of 19 C.F.R. § 351.225(l)
The relevant regulatory provisions are ambiguous regarding the date that the Department
must commence suspension of liquidation when (1) Commerce has issued a final affirmative
scope ruling without having initiated a formal scope inquiry and (2) liquidation has not been
suspended. In light of this ambiguity, the regulatory history provides relevant insight into
Commerce’s intent in drafting the regulations governing the suspension of liquidation in scope
proceedings. See Antidumping Duties; Countervailing Duties, 62 Fed. Reg. 27,296, 27,327–30
(Dep’t Commerce May 19, 1997) (final rule) (“Final Rule”). Commerce received numerous
comments when promulgating its regulations, including comments proposing that an order
suspending liquidation should apply to all unliquidated entries in scope proceedings because,
unlike in the context of circumvention,15 “the Department must view any merchandise that it
determines to be within the scope of an order as always having been within the scope” since
“scope rulings only clarify, and do not expand, the scope of an order.” Id. at 27,327–28. After
considering this comment, Commerce refused to codify the retroactive suspension of liquidation
in scope proceedings if liquidation has not yet been suspended. Commerce was mindful when
15
In addition to having the authority to issue scope rulings to clarify whether certain
merchandise falls within a pre-defined scope, Commerce may make circumvention
determinations pursuant to 19 U.S.C. § 1677j and 19 C.F.R. § 351.225(g)–(j) to lawfully expand
an order to cover merchandise that otherwise would not be covered by the scope. See H.R. Rep.
No. 100–576, at 599–601 (1988), reprinted in 1988 U.S.C.C.A.N. 1547, 1632–34.
Court No. 13-00270 Page 24
drafting its regulations that “[s]uspension of liquidation is an action with a potentially significant
impact on the business of U.S. importers and foreign exporters and producers.” Id. at 27,328.
The Department explained that, “when liquidation has not been suspended, Customs, at least,
and perhaps the Department as well, have viewed the merchandise as not being within the scope
of an order, importers are justified in relying upon that view, at least until the Department rules
otherwise.” Id.
Commerce also recognized that the domestic industry had concerns about potential
financial harm resulting from imports escaping the assessment of duties prior to the initiation of
a scope inquiry pursuant to 19 C.F.R. § 351.225(e). See id. To strike a balance between the
competing interests of all parties, Commerce decided in its regulations (1) “to impose a time
limit of 45 days, from the receipt of a request for a scope ruling, on the determination whether to
initiate a formal scope inquiry under § 351.225,” and (2) “to make a suspension of liquidation,
when ordered in conjunction with a preliminary or final affirmative ruling, effective as to entries
of all affected merchandise that are made on or after the date of initiation of the scope inquiry
and that remain unliquidated as of the date of publication of the affirmative ruling.” Id.
Commerce did not indicate that the regulation conferred broader authority to suspend liquidation
retroactively where Commerce does not initiate a scope inquiry and issues a final scope ruling
pursuant to 19 C.F.R. § 351.225(d). Commerce instead substantially limited the temporal reach
of an affirmative scope ruling by promulgating these limitations on the suspension of liquidation
in its regulations. Thus, the regulatory history highlights the fact that Commerce did not intend
to apply an order suspending liquidation retroactively in a scope proceeding at the time the
governing regulations were promulgated.
Court No. 13-00270 Page 25
B. Relevant Authority
Previous decisions issued by this court and the Court of Appeals for the Federal Circuit
are also instructive in understanding the limitations on Commerce’s authority to suspend
liquidation retroactively in a scope proceeding. See AMS Assocs., Inc. v. United States, 36 CIT
__, 881 F. Supp. 2d 1374 (2012) (“AMS Assocs. I”), aff’d, 737 F.3d 1338 (Fed. Cir. 2013)
(“AMS Assocs. II”).
In AMS Assocs. I, at issue were Commerce’s suspension instructions during the second
administrative review of the antidumping duty order on laminated woven sacks from China.
During the first review, Commerce undertook an investigation into whether laminated woven
sacks produced using fabric from third countries were of Chinese origin and subject to the
antidumping duty order. See AMS Assocs. I, 36 CIT at __, 881 F. Supp. 2d at 1376. Commerce
found that China was the country of origin and subsequently issued a “clarification” instructing
Customs to suspend liquidation of the subject merchandise from China. Id. at __, 881 F. Supp.
2d at 1376–77. The court explained that “the effect of the Clarification was to retroactively
suspend liquidation of and collect cash deposits of antidumping duties on all entries of [the
respondent’s] sacks made with non-PRC origin fabric after January 31, 2008.” Id. at __, 881 F.
Supp. 2d at 1377. In the second administrative review, Commerce followed its prior country of
origin determination and issued retroactive suspension instructions. See id. The plaintiff filed
suit arguing that Commerce acted contrary to its regulations by ruling on the scope of the order
during the administrative review without initiating a scope or circumvention inquiry as provided
for under 19 C.F.R. § 351.225. See id. at __, 881 F. Supp. 2d at 1378. The court agreed.
Court No. 13-00270 Page 26
The court explained that the Department “must abide by the restrictions imposed on its
authority to perform certain actions during a scope inquiry regardless of the formality of the
proceeding pursuant to which that is determined.” Id. at __, 881 F. Supp. 2d at 1380. The court
noted that “[e]ven if Commerce decided not to initiate a formal scope proceeding, it was bound
by the substantive regulations regarding suspension of liquidation during scope determinations.”
Id. at __, 881 F. Supp. 2d at 1381. The court dismissed the notion that retroactive suspension
instructions are appropriate where merchandise falls within the original scope because such an
“argument[] could be applied in any scope inquiry, because by definition Commerce decides in
those proceedings whether the product involved falls within the previously-defined scope.” Id.
at __, 881 F. Supp. 2d at 1382. The court also expressed concerns with affirming Commerce’s
actions because “Commerce could avoid the restriction on suspension of liquidation in any case
by simply declaring an ‘informal’ scope review and issuing retroactive suspension of liquidation
instructions to CBP to ‘clarify’ what the original scope definition covers.” Id. Accordingly, the
court held that Commerce’s retroactive suspension instructions were based upon an erroneous
interpretation of the agency’s regulations and exceeded the agency’s authority under 19 C.F.R.
§ 351.225(l). Id. at __, 881 F. Supp. 2d at 1382–83.
The Court of Appeals for the Federal Circuit subsequently affirmed the court’s decision
in AMS Assocs. I. See AMS Assocs. II, 737 F.3d at 1343. The Court of Appeals explained that,
“if Commerce determines that a product that is not subject to the existing order should be
included within the scope of that order, then the scope regulations specifically authorizing
Commerce to instruct Customs to suspend liquidation and to require cash deposits of estimated
duties for such merchandise have limits.” Id. The Court of Appeals declared that “when
Court No. 13-00270 Page 27
Commerce ‘clarifies’ the scope of an existing antidumping duty order that has an unclear scope,
the suspension of liquidation and imposition of antidumping cash deposits may not be
retroactive but can only take effect ‘on or after the date of the initiation of the scope inquiry.’
The unambiguous plain language of the regulation only authorizes Commerce to act on a
prospective basis, and such express prospective authorization reasonably is interpreted to
preclude retroactive authorization.” Id. at 1344. Thus, the Court of Appeals held that Commerce
acted contrary to its regulations because the scope of the order was unclear regarding the
merchandise and, in such circumstances, the regulations only authorize Commerce to suspend
liquidation on a prospective basis. See id.
If the court affirms Commerce’s actions here, the AMS Assocs. I court’s concerns would
come to fruition and Commerce would be able to “avoid the restriction on suspension of
liquidation in any case by simply declaring an ‘informal’ scope review and issuing retroactive
suspension of liquidation instructions to CBP to ‘clarify’ what the original scope definition
covers.” AMS Assocs. I, 36 CIT at __, 881 F. Supp. 2d at 1382. Commerce acknowledged the
court’s holding in AMS Assocs. I that Commerce exceeded its authority by suspending
liquidation retroactively. Final Scope Ruling at 7. Commerce theorized that the decision in
AMS Assocs. I was based on facts distinguishable from this case. See id. at 7–8. Commerce
asserted that the action reviewed by the court in AMS Assocs. I was made in the context of an
administrative review pursuant to a substantial transformation analysis and involved instructions
suspending liquidation retroactive to the beginning of the first period of review. However,
Commerce found distinctions where no real difference exists. In AMS Assocs. I and AMS
Assocs. II, Commerce ignored its regulatory procedures for interpreting the scope of an
Court No. 13-00270 Page 28
antidumping or countervailing duty order and exceeded its authority to suspend liquidation.
Here, the Department similarly failed to abide by the regulatory constraints on suspending
liquidation.
Defendant emphasizes the Court of Appeals’ comment in AMS Assocs. II that
“Commerce does not have to initiate a formal scope proceeding . . . when it wishes to issue a
ruling that does not clarify the scope of an unambiguous original order.” Def. Resp. 21 (quoting
AMS Assocs. II, 737 F.3d at 1344).16 That statement does not lend support, however, to
Defendant’s position. Commerce’s examination of the (k)(1) sources without a formal scope
inquiry does not relieve the Department of its obligation to comply with its regulations
concerning the effective date for suspending liquidation because the final scope ruling clarified
the scope of an ambiguous order.
Defendant argues that “unlike AMS, there was no ‘clarification’ issued by Commerce . . .
[t]hus, Commerce was not required by 19 C.F.R. § 351.225 to initiate a formal scope inquiry nor
to issue instructions effective on or after the date of the scope inquiry Commerce had properly
declined to undertake.” Def. Resp. 21. The court does not agree. A scope ruling by definition is
a determination issued by Commerce that clarifies the scope of a standing antidumping or
16
Commerce may issue a scope ruling by examining the (k)(1) factors pursuant to 19 C.F.R.
§ 351.225(d) or (e), but under (e) it sends a letter to initiate an inquiry, and under (d) it does not
provide such notice. The court cannot identify any material difference between a (k)(1) analysis
performed under either approach. Defendant could not explain a difference during oral
argument. See Oral Argument at 00:34:48–00:40:55. According to Defendant, it seems that
Commerce can arbitrarily decide whether to initiate an inquiry or not, with the ability to “avoid
the restriction on suspension of liquidation in any case by simply declaring an ‘informal’ scope
review and issuing retroactive suspension of liquidation instructions to CBP to ‘clarify’ what the
original scope definition covers.” AMS Assocs. I, 36 CIT at __, 881 F. Supp. 2d at 1382.
Court No. 13-00270 Page 29
countervailing duty order. 19 C.F.R. § 351.225(a) (providing that scope rulings “clarify the
scope of an order . . . with respect to particular products”). There was a genuine question as to
whether AREMA washers were within the scope of the Order that required Commerce to make a
determination. Customs had not been collecting deposits of antidumping duties on Plaintiff’s
entries of AREMA washers, suggesting that the scope of the Order was not clear with respect to
such merchandise. Customs’ failure to assess antidumping duties on Plaintiff’s entries ostensibly
showed that Customs did not view Plaintiff’s merchandise within the scope of the Order.
Commerce needed to issue the final scope ruling to clarify that AREMA washers are included
within the scope of the Order. Thus, Defendant’s argument cannot withstand scrutiny.17
17
The Court of Appeals in AMS Assocs. II cited Huaiyin Foreign Trade Corp. (30) v. United
States, 322 F.3d 1369, 1378–79 (Fed. Cir. 2003) to illustrate when Commerce does not clarify
the scope of an order. See AMS Assocs. II, 737 F.3d at 1344. The Huaiyin case involved a
clarification message sent by Commerce to Customs. In the final determination from the
antidumping duty investigation on freshwater crawfish tail meat from China, Commerce
assigned “Huaiyin Foreign Trade Corporation” a company-specific rate rather than the typically
higher country-wide rate that is assigned by default in non-market economy proceedings. See
Huaiyin, 322 F.3d at 1372–73. Commerce later learned, however, that many companies bear the
name “Huaiyin Foreign Trade Corporation” and only the company named Huaiyin-5 was entitled
to a company-specific rate. See Huaiyin, 322 F.3d at 1373. As a result, Commerce sent a
clarification message to Customs stating that only Huaiyin-5 was entitled to the company-
specific rate. See Huaiyin, 322 F.3d at 1373. Huaiyin-30 contended that the clarification
message constituted an unlawful change to the antidumping duty order. The Court of Appeals
did not agree because (1) Huaiyin-30 did not participate in the initial investigation and was
therefore never entitled to a company-specific rate, and (2) Commerce made no change to the
order because it “neither changed the companies entitled to the decreased rate, nor modified the
type of products covered by the . . . order.” Huaiyin, 322 F.3d at 1379. In Huaiyin the scope
was clear and Commerce did not make a clarification regarding the class or kind of merchandise
subject to the order. By contrast, in this case Commerce determined that the scope of the Order
was unclear and issued a final scope determination to clarify that AREMA washers were
included within the scope.
Court No. 13-00270 Page 30
Defendant relies upon the court’s decision in Shenyang Yuanda Aluminum Industry
Engineering Co. v. United States, 38 CIT __, 961 F. Supp. 2d 1291 (2014) to support its
argument that the court upheld the retroactive suspension of liquidation. See Def. Resp. 21–22.
Defendant asserts that in Shenyang, “Commerce did not initiate a scope inquiry and ordered
Customs to ‘continue’ to suspend liquidation back to the date that entries were first suspended
(plaintiffs’ entries had not been subject to suspension of liquidation previously).” Def. Resp. 22.
Defendant is mistaken. First, in Shenyang, Commerce instructed Customs to continue to
suspend liquidation, as opposed to suspending liquidation for the first time. See Shenyang, 38
CIT __, 961 F. Supp. 2d at 1303. Second, nothing in Shenyang suggests that the plaintiff’s
entries had not been suspended previously and that Commerce retroactively suspended
liquidation as Defendant claims. The Shenyang court explained that “AMS is inapplicable to this
case because, here, the instructions added no new products to the scope, and because liquidation
of plaintiffs’ curtain wall units has been suspended since publication of the preliminary
determinations.” Id. at __, 961 F. Supp. 2d at 1303. Defendant’s reliance on Shenyang to justify
Commerce’s actions is unavailing.
Defendant attempts to justify Commerce’s suspension instructions by maintaining that
Plaintiff “was on notice that its entries were potentially subject to antidumping duties.” Final
Scope Ruling at 8. Defendant’s argument is unpersuasive. The plain language of the scope of
the Order was unclear. At oral argument, Defendant conceded that, “in some instances the
language of the order can be so abundantly clear and applicable that you don’t have to go to
(k)(1), but that isn’t the case here.” Oral Argument at 00:27:12–00:27:27. As stated above,
Customs did not assess antidumping duties on imports of AREMA washers. Commerce was
Court No. 13-00270 Page 31
compelled to examine the (k)(1) factors and issue a final scope ruling to clarify that AREMA
washers were included within the scope of the Order. Commerce was required to adhere to its
own policy that “[i]t would be extremely unfair to importers and exporters to subject entries not
already suspended to suspension of liquidation and possible duty assessment with no prior notice
. . . . Because, when liquidation has not been suspended, Customs, at least, and perhaps the
Department as well, have viewed the merchandise as not being within the scope of an order,
importers are justified in relying upon that view, at least until the Department rules otherwise.”
Final Rule, 62 Fed. Reg. at 27,328. Commerce’s determination that Plaintiff’s merchandise is
covered by the pre-defined scope does not grant the Department authority to retroactively
suspend liquidation and require cash deposits. All affirmative scope determinations in effect
state that certain merchandise has always been included within the scope of an order. See AMS
Assocs. I, 36 CIT at __, 881 F. Supp. 2d at 1382 (“[B]y definition Commerce decides in [scope]
proceedings whether the product involved falls within the previously-defined scope.”).
Commerce’s regulations provide, however, that such merchandise will not be considered covered
by an order for purposes of duty liability until Commerce issues a preliminary or final scope
ruling, whichever occurs earlier. See 19 C.F.R. § 351.225(l). Plaintiff was first put on notice of
what conduct was regulated by the order when Commerce issued its final scope ruling.18
18
Defendant also relies on the Court of Appeals for the Federal Circuit’s decision in Ugine &
ALZ Belg. v. United States, 551 F.3d 1339 (Fed. Cir. 2009), to argue that Commerce acted
consistent with its regulations. See Def. Resp. 20. Defendant’s reliance is misplaced because in
that case Commerce issued liquidation instructions pursuant to a negative scope determination.
See Ugine & ALZ Belg., 551 F.3d at 1344–46. The instant case, however, concerns suspension
instructions following an affirmative scope determination.
Court No. 13-00270 Page 32
In this case, Commerce decided to suspend liquidation retroactively “[b]ecause the
language used when [Commerce] first instructed CBP to suspend liquidation of helical spring
lock washers following the preliminary determination in the investigation clearly demonstrates
that US&F’s product should always have been suspended.” Final Scope Ruling at 8. The
Department reasoned that:
the merchandise in question was always included within the scope of the Order
. . . and the Department’s scope determination merely clarifies that fact. Further,
once such a finding is made, it would be incongruous not to . . . assess
antidumping duties on the basis of {this merchandise} for all investigations
conducted pursuant to the order . . . for remaining unliquidated entries and cash
deposits for future entries . . . .
Id. at 7. Commerce recognized that Plaintiff should be able to rely upon Customs’ actions at the
time of entry, but noted that such reliance is appropriate only when there is sufficient question to
warrant a formal inquiry. See id. at 8. Thus, Commerce instructed Customs “to suspend
liquidation of all unliquidated entries of merchandise made on or after the first day merchandise
subject to the Order was suspended for antidumping purposes and collect cash deposits on all
such entries,” id. at 9, which effectively instructed Customs to suspend liquidation of all
unliquidated entries retroactive to the issuance of the Order in 1993. In this case, Plaintiff’s
unliquidated entries date back to 2011.
Commerce’s suspension instructions are not in accordance with the law in light of the
regulatory language, the regulatory history, and the Court of Appeals’ decision in AMS Assocs.
II. The ambiguous regulatory language did not give Commerce unfettered authority to suspend
liquidation retroactive to the date liquidation was first suspended for antidumping purposes.
Commerce must act within the regulatory constraints on its authority to suspend liquidation, and
Court No. 13-00270 Page 33
any interpretation of its regulations must be consistent with such constraints. The court
concludes that Commerce exceeded its authority under 19 C.F.R. § 351.225(l)(3) by interpreting
the regulation to authorize retroactive suspension of liquidation when issuing a final scope ruling
pursuant to 19 C.F.R. § 351.225(d) that clarifies the scope of an order.
Commerce’s instructions to suspend liquidation retroactively and collect cash deposits on
all unliquidated entries of AREMA washers are not in accordance with the law. On remand,
Commerce must draft new suspension instructions with a date that is consistent with this
opinion, the regulatory language, the regulatory history, and the Court of Appeals’ decision in
AMS Assocs. II.
CONCLUSION
For the reasons set forth above, the court holds that (1) Commerce’s scope determination
is supported by substantial evidence, and (2) Commerce’s instructions to Customs to suspend
liquidation of entries of AREMA washers retroactively are contrary to law. Therefore, in
accordance with the foregoing, it is hereby
ORDERED that Commerce’s scope determination on AREMA washers is sustained; and
it is further
ORDERED that Commerce’s instructions to Customs to suspend liquidation of AREMA
washers retroactively are remanded for Commerce to withdraw and draft new suspension
instructions with a date that is consistent with the agency’s regulations and this opinion; and it is
further
ORDERED that Commerce shall file its new draft suspension instructions by February
6, 2017; and it is further
Court No. 13-00270 Page 34
ORDERED that the parties shall file comments on the new suspension instructions by
March 6, 2017; and it is further
ORDERED that the parties shall file any replies to the comments by March 20, 2017;
and it is further
ORDERED that Commerce shall issue its new suspension instructions after the court
approves.
/s/ Jennifer Choe-Groves
Jennifer Choe-Groves, Judge
Dated: January 11, 2017
New York, New York