People v. Shreffler

2015 IL App (4th) 130718
FILED
August 4, 2015
Carla Bender
NO. 4-13-0718 4th District Appellate
Court, IL
IN THE APPELLATE COURT
OF ILLINOIS
FOURTH DISTRICT
THE PEOPLE OF THE STATE OF ILLINOIS, ) Appeal from
Plaintiff-Appellee, ) Circuit Court of
v. ) Piatt County
STEPHEN J. SHREFFLER, ) No. 12CF15
Defendant-Appellant. )
) Honorable
) Richard L. Broch,
) Judge Presiding.
JUSTICE STEIGMANN delivered the judgment of the court, with opinion.
Justices Harris and Holder White concurred in the judgment and opinion.
OPINION
¶1 In August 2013, following a stipulated bench trial, the trial court found defendant,
Stephen J. Shreffler, guilty of three counts of unlawful use of weapons (UUW) in violation of
section 24-1(a)(7)(ii) of the Criminal Code of 1961 (720 ILCS 5/24-1(a)(7)(ii) (West 2010)).
Specifically, the State alleged, and the court found, that defendant possessed three illegal guns:
(1) two shotguns, each with an overall length less than 26 inches; and (2) one rifle with a barrel
less than 16 inches in length. The court sentenced defendant to 24 months of probation and 180
days in jail.
¶2 Defendant appeals, arguing that the State failed to prove him guilty beyond a rea-
sonable doubt because (1) the "overall length" of the shotguns should have been measured by the
length of a straight line between the two farthest points on the gun, instead of by the length of a
straight line parallel to the bore, and (2) a flash suppressor at the end of the rifle's barrel should
have been included in the measurement of the rifle barrel's length. Defendant also contends that
section 24-1(a)(7)(ii) of the Code (1) is unconstitutionally vague and (2) violates the second
amendment right to keep arms (U.S. Const., amend. II). Because we agree that the stipulated
evidence failed to prove defendant guilty of the charged offenses, we reverse his convictions and
sentence without addressing his constitutional claims.
¶3 I. BACKGROUND
¶4 The following pertinent facts are largely undisputed.
¶5 In March 2011, federal agents from the Bureau of Alcohol, Tobacco, Firearms,
and Explosives (ATF) executed a search warrant on defendant's home in Monticello, Illinois.
The agents suspected defendant of selling firearms without a license based upon information de-
fendant posted on a website he maintained. During the search, ATF agents confiscated more
than 40 firearms, many of which defendant kept displayed on the walls throughout his house.
Among those guns were the two shotguns and the rifle at issue in this case. Federal authorities
declined to prosecute defendant, and the case was turned over to the local State's Attorney.
¶6 In October 2012, the State charged defendant with violating section 24-1(a)(7)(ii)
of the Code in that he possessed two "Companhia Brasileria de Cartuchos 12 gauge single shot
shotgun[s,]" each with an overall length of less than 26 inches. In December 2012, the State
charged defendant with violating that same statute in that he possessed a "Palmetto AR-15 rifle"
with a barrel less than 16 inches in length.
¶7 At an August 2013 bench trial, the parties presented the following evidence by
stipulation. (Defendant did not stipulate that this evidence was sufficient to convict.)
¶8 In defendant's home, ATF special agent Dennis Fritzsche found an "AR-15 type
rifle" and "two weapons made from shotguns," which he sent to the ATF Firearms Technology
-2-
Branch in Martinsburg, West Virginia, for testing and measurement. (Fritzsche apparently char-
acterized the shotguns as "weapons made from shotguns" because the stocks of the guns "had
been cut down." For purposes of this appeal, we simply refer to the guns as the "rifle" and the
"shotguns.")
¶9 Earl Griffith of the ATF Firearms Technology Branch in Martinsburg measured
the three guns recovered from defendant's home. He found that the rifle had a barrel length of 11
5/8 inches. That measurement did not include the flash suppressor at the end of the barrel. If the
flash suppressor had been included in the measurement, the barrel of the rifle would have ex-
ceeded 16 inches. According to the stipulation, Griffith would have testified that "a screw on,
screw off flash suppressor is an attachment and is not considered part of the barrel of a rifle and
is not included in the measurement of the barrel."
¶ 10 Pursuant to ATF regulations, Griffith measured the two shotguns along a straight
line parallel to the bore (the bore is the interior portion of the barrel through which the projectile
travels). By that measurement, Griffith found that one of defendant's shotguns measured 251/4
inches in overall length and the other shotgun measured 253/8 inches in overall length. If Griffith
had measured a straight line from the tip of the barrel to the tip of the stock (not parallel to the
bore), both shotguns would have exceeded 26 inches in overall length. Griffith would have testi-
fied that "the measurement methods he used for the rifle barrel and the overall length of the two
weapons made from shotguns are the generally accepted measurement methods for ATF and the
firearm industry and those methods of measurement are set forth in [27 C.F.R. § 479.11]." The
trial court admitted the following diagram into evidence as part of the parties' stipulation:
-3-
¶ 11 The above diagram depicts two methods for measuring the overall length of a
shotgun. The ATF's regulations approve of the method depicted on the right of the diagram, in
which the overall length is measured from a straight line parallel to the bore. See 27 C.F.R.
§ 497.11. The method depicted on the left of the diagram (which ATF does not approve, as indi-
cated by the large "X" through the image) determines the overall length by measuring a straight
line between the two farthest points on the gun, which will usually be the tip of the barrel to the
tip of the stock.
¶ 12 The trial court found defendant guilty of all three counts of UUW. Later in Au-
gust 2013, the court sentenced defendant to 24 months of probation and 180 days in jail.
¶ 13 This appeal followed.
¶ 14 II. ANALYSIS
¶ 15 Defendant argues that the State failed to prove him guilty beyond a reasonable
doubt because (1) the overall length of the shotguns should have been measured by the length of
-4-
a straight line between the two farthest points on the gun, instead of the length of a straight line
parallel to the bore, and (2) a flash suppressor at the end of the rifle's barrel should have been in-
cluded in the measurement of the rifle barrel's length. Because we agree with these contentions,
we need not address defendant's additional claims that section 24-1(a)(7)(ii) of the Code is un-
constitutionally vague and violates the second amendment right to keep arms.
¶ 16 A. The Standard of Review
¶ 17 Typically, when a defendant claims that the evidence presented at trial was insuf-
ficient to sustain his conviction, "a reviewing court must determine whether, after viewing the
evidence in the light most favorable to the State, any rational trier of fact could have found the
required elements of the crime beyond a reasonable doubt." People v. Gonzalez, 239 Ill. 2d 471,
478, 942 N.E.2d 1246, 1250 (2011). In this case, however, the facts—specifically, the physical
dimensions of defendant's guns—are not in dispute. Instead, the only question is which of those
dimensions matter for purposes of section 24-1(a)(7)(ii) of the Code. Because this is a question
of statutory interpretation, our review is de novo. People v. Giraud, 2012 IL 113116, ¶ 6, 980
N.E.2d 1107.
¶ 18 "When construing a statute, the primary objective is to ascertain and give effect to
the legislature's intent, best indicated by the plain and ordinary language of the statute."
Skaperdas v. Country Casualty Insurance Co., 2015 IL 117021, ¶ 15, 28 N.E.3d 747.
¶ 19 B. Section 24-1(a)(7)(ii) of the Code
¶ 20 Section 24-1(a)(7)(ii) of the Code provides, in pertinent part, as follows:
"(a) A person commits the offense of unlawful use of
weapons when he knowingly:
***
-5-
(7) Sells, manufactures, pur-
chases, possesses or carries:
***
(ii) any rifle having
one or more barrels less than
16 inches in length *** or
any weapon made from a ***
shotgun, whether by altera-
tion, modification, or other-
wise, if such a weapon as
modified has an overall
length of less than 26 inch-
es[.]"
720 ILCS 5/24-1(a)(7)(ii) (West 2010).
¶ 21 C. The Shotguns
¶ 22 The State contends that the legal measure of a shotgun's "overall length" under
section 24-1(a)(7)(ii) of the Code is not the farthest distance between two points on the shotgun.
Instead, the State asserts that the "overall length" must be measured from a straight line parallel
to the bore of the shotgun. We reject this contention, which runs contrary to the plain and ordi-
nary meaning of the term "overall length."
¶ 23 The State correctly points out that the ATF's regulations state that the overall
length of a shotgun should be measured from a line parallel to the bore. However, as defendant
also correctly points out, the Illinois General Assembly could have provided for such a method
-6-
of measurement in the text of section 24-1(a)(7)(ii) of the Code if it deemed that method neces-
sary to effectuate the purpose of the statute. It did not. "Courts may not depart from the plain
language of a statute by reading into it exceptions, conditions, or limitations that the legislature
did not express." Skaperdas, 2015 IL 117021, ¶ 15, 28 N.E.3d 747.
¶ 24 Because "overall length" is not defined in the statute, we give that term its plain
and ordinary meaning. "When the statute contains undefined terms, it is entirely appropriate to
employ a dictionary to ascertain the plain and ordinary meaning of those terms." People v. Da-
vison, 233 Ill. 2d 30, 40, 906 N.E.2d 545, 551 (2009). "Length" is defined as "the longer or
longest dimension of an object." Merriam-Webster's Collegiate Dictionary 664 (10th ed. 2000).
"Overall" is defined as "from one end to the other." Merriam-Webster's Collegiate Dictionary
826 (10th ed. 2000). The plain and ordinary meaning of the statutory terms simply provides no
support for the State's assertion that the line of measurement must be restricted to a line parallel
with the shotgun's bore. Instead, from one end to the other, the longer or longest dimension of a
shotgun is a straight line between the farthest two points on the gun, not necessarily the length of
a line parallel to the bore.
¶ 25 Because the undisputed evidence showed that both of defendant's shotguns had an
overall length of more than 26 inches, as measured by a straight line between the farthest two
points on the guns, the State failed to prove defendant guilty of violating section 24-1(a)(7)(ii) of
the Code for possessing shotguns shorter than 26 inches in overall length. Accordingly, we re-
verse defendant's convictions.
¶ 26 D. The Rifle
¶ 27 The trial court found defendant guilty of possessing a rifle with a barrel less than
16 inches. It is undisputed that if the measurement of the rifle barrel had included the flash sup-
-7-
pressor that was attached to the end of the barrel when the gun was seized from defendant's
home, the length of the barrel would have exceeded 16 inches.
¶ 28 The State contends that the legal length of a rifle barrel under section 24-
1(a)(7)(ii) of the Code does not include a flash suppressor attached to the end of the barrel. Illi-
nois law does not specifically define the term "barrel" as used in section 24-1(a)(7)(ii) of the
Code. "Barrel" is defined as "the part of a gun that the bullets go through when the gun is fired."
Merriam-Webster Dictionary, http://www.merriam-webster.com/dictionary/barrel (last visited
July 1, 2015). It is undisputed that a bullet fired from defendant's rifle would have traveled
through the flash suppressor.
¶ 29 However, the dictionary definition of "barrel" leaves some remaining ambiguity
because it defines the barrel as "part of" the gun. Should we consider a flash suppressor "part of"
the gun such that it fits within the definition of "barrel"? We conclude we should for two rea-
sons.
¶ 30 First, "[p]ursuant to the rule of lenity, ambiguous criminal statutes will generally
be construed in the defendant's favor." People v. Gutman, 2011 IL 110338, ¶ 12, 959 N.E.2d
621. "A statute is ambiguous if it is subject to more than one reasonable interpretation."
Skaperdas, 2015 IL 117021, ¶ 16, 28 N.E.3d 747. Neither defendant nor the State has advanced
unreasonable interpretations of the meaning of "barrel." However, our law dictates that the tie
should be resolved in defendant's favor.
¶ 31 Second, the State has cited no provision of Illinois law from which this court may
conclude that a flash suppressor—which undisputedly serves a functional purpose—is not part of
a gun simply because it can be unscrewed and removed from the other parts of the gun. The
General Assembly has certainly not drawn such a distinction. Were this court to adopt that dis-
-8-
tinction and incorporate it into section 24-1(a)(7)(ii) of the Code, our doing so would simply add
uncertainty and ambiguity to the statute. Almost every gun can be disassembled into multiple
component parts. How many parts must be unfastened and removed before the remaining parts
are no longer a gun? Most shotguns, for instance, can fire with the stock removed. Yet even the
ATF agrees that the stock is included in the "overall length" of a shotgun. It is the role of the
legislature—not this court—to resolve such philosophical questions. Until and unless the Gen-
eral Assembly sees fit to promulgate more specific statutory definitions, we will construe the
statutory ambiguity in defendant's favor.
¶ 32 The State does cite federal case law and regulations holding that a flash suppres-
sor is not part of the barrel of a rifle under federal law. However, because those cases and regu-
lations do not purport to interpret the Illinois statute at issue in this case, we are not bound to fol-
low them.
¶ 33 Further, it is worth mentioning that the State presented no evidence that defendant
ever removed the flash suppressor at any point during his ownership of the rifle. Although the
trial court deemed the testimony irrelevant, the court allowed defendant to submit an affidavit as
an offer of proof in which defendant stated the following:
"As to the AR-15 rifle, the same was purchased in March
of 1991 and was never modified by defendant. It was in the same
condition at time of seizure as it was at time of purchase including
the attached flash suppressor. Defendant truly believed and con-
tinues to believe that the flash suppressor was an integral part of
the barrel thereby rendering a measurement of 16 inches or more to
the same."
-9-
¶ 34 To be clear, we do not mean to suggest that anything at the end of a rifle barrel
must be included in the measurement for purposes of section 24-1(a)(7)(ii) of the Code. It is not
as if someone may tape a chopstick to the end of a gun and call it part of the barrel for purposes
of the statute. But in a case such as this, in which the flash suppressor is a functional component
of the gun through which the bullet passes when the gun is fired, and the State presents no evi-
dence that the defendant has possessed the gun without the flash suppressor attached, the law
must be construed in defendant's favor.
¶ 35 We conclude that the attached flash suppressor in this case should have been in-
cluded as part of the "barrel" of defendant's rifle. Accordingly, the barrel of defendant's rifle ex-
ceeded 16 inches in length, and his conviction under section 24-1(a)(7)(ii) of the Code must be
reversed.
¶ 36 We also note that because the evidence presented at trial was insufficient to sus-
tain defendant's convictions, double jeopardy prohibits a retrial. See People v. Lopez, 229 Ill. 2d
322, 367, 892 N.E.2d 1047, 1073 (2008) ("The State cannot retry a defendant once it has been
determined that the evidence introduced at trial was insufficient to sustain a conviction.").
¶ 37 III. CONCLUSION
¶ 38 For the reasons stated, we reverse defendant's convictions and sentences.
¶ 39 Reversed.
- 10 -