Wright v. Harts Machine Servs., Inc.

[Cite as Wright v. Harts Machine Servs., Inc., 2016-Ohio-4758.]
IN THE COURT OF APPEALS OF OHIO
SIXTH APPELLATE DISTRICT
FULTON COUNTY
Carl Wright, et al. Court of Appeals No. F-15-004
Appellees Trial Court No. 12CV000314
v.
Harts Machine Services, Inc., et al. DECISION AND JUDGMENT
Appellants Decided: June 30, 2016
*****
Kimberly C. Young and Gary Cowan, for appellees.
Terrance M. Miller and Jared M. Klaus, for appellant.
*****
YARBROUGH, J.
I. Introduction
{¶ 1} Appellant, Harts Machine Services, Inc. (“Harts”), appeals the judgment of
the Fulton County Court of Common Pleas, awarding damages to appellees, Pamela
Worman and Carl Wright, as personal representative and administrator for the estate of
James Worman, in the amount of $2,761,228.15 following a jury trial.
A. Facts and Procedural Background
{¶ 2} This action stems from an accident involving James and Pamela Worman
that occurred on May 8, 2011. On that date, James and Pamela were riding their self-
assembled trike eastbound on S.R. 18 near Cecil, Ohio, when the right rear axle shaft
suddenly fractured, causing the right rear tire to separate from the trike. Harts supplied
the axle shaft with the assistance of Michael Jarzembski, who fabricated the axle.
{¶ 3} James, who was driving the trike when the axle shaft snapped, lost control of
the vehicle, and it careened into an adjacent ditch. James and Pamela were ejected from
the trike upon impact. They both sustained life-threatening injuries requiring helicopter
transport to Parkview Hospital in Fort Wayne, Indiana.
{¶ 4} Pamela’s injuries consisted of a fractured tibia, scapula, humerus, lumbar
vertebrae, and both femurs, as well as a collapsed lung and pulmonary insufficiency.
James’s injuries included several thoracic vertebrate fractures, multiple cervical fractures,
spinal cord injury, acute kidney failure, pulmonary insufficiency, paroxysmal ventricular
tachycardia, and pneumonia. Pamela underwent extensive treatment leading to her
eventual partial recovery. Unfortunately, James was unable to make a full recovery, and
he eventually succumbed to his injuries on June 17, 2012.
{¶ 5} As a result of the foregoing, Pamela and Wright, as personal representative
for James’s estate, filed a complaint with the trial court on November 9, 2012, in which
they asserted several product liability claims under the Ohio Products Liability Act
(“OPLA”), sections 2307.71 to 2307.80 of the Ohio Revised Code, against Jarzembski as
2.
the manufacturer of the right rear axle shaft and Harts as the supplier of the axle shaft. In
their claims against Jarzembski, appellees alleged that Jarzembski deviated from accepted
industry standards in manufacturing the axle shaft by failing to induction harden and heat
treat it. In their claims against Harts, appellees urged that Harts was negligent in
selecting Jarzembski to manufacture the axle shaft when it should have known that
Jarzembski was “incompetent, incapable and ill-equipped to manufacture that part.”
Further, appellees alleged that Harts negligently misrepresented that it would be
supplying an axle shaft that was manufactured by a “reputable manufacturer.”
{¶ 6} On January 4, 2013, Harts filed its answer in this action, in which it
generally denied the product liability allegations contained in appellees’ complaint.
Further, Harts asserted that it was not a supplier under Ohio’s product liability statutes. It
also alleged that the axle shaft was not defective, and noted that it was not the
manufacturer of the axle shaft in any event.
{¶ 7} Three days later, Harts filed a motion to dismiss under Civ.R. 12(B)(6). In
its motion, Harts argued that it was not a supplier for purposes of product liability claims
under R.C. 2307.71(A)(15)(a) because it was not “in the course of business” of supplying
motorcycle axles. Additionally, Harts contended that it was not a manufacturer under
R.C. 2307.71(A)(9), noting that the complaint also included Jarzembski as a defendant
and specifically alleged that he was the manufacturer of the axle shaft.
{¶ 8} In opposition to Harts motion to dismiss, appellees argued that Harts was a
supplier because it was in the business of selling motor vehicle parts, of which an axle
3.
shaft is one. The trial court agreed, finding that “an ‘axle’ comes within the parameter of
the greater class of ‘auto parts.’” Thus, the court determined that Harts could be found to
be a supplier under R.C. 2307.71 and denied the motion to dismiss.
{¶ 9} Discovery commenced, and the matter proceeded through pretrial.
Eventually, on April 1, 2014, Harts and Jarzembski filed a joint motion for summary
judgment. In the motion, Harts and Jarzembski argued that they were entitled to
summary judgment under Ohio’s product liability statutes, because the axle shaft did not
fit the definition of a “product.” Harts and Jarzembski noted that the axle shaft was
merely a duplicate of the prior axle shaft, manufactured at appellees’ request for
appellees’ sole use. Further, Harts and Jarzembski argued that Jarzembski was not a
“manufacturer” and Harts was not a “supplier” under R.C. 2307.71, since neither party
was engaged in the business of selling motorcycle or trike parts. Alternatively, Harts
contended that appellees’ claims against it failed because appellees’ could not prove that
Harts made any express representations regarding the quality, character, or safety of the
product, nor could they establish that Harts was negligent in selecting Jarzembski to
manufacture the axle shaft.
{¶ 10} In opposition to Harts’s and Jarzembski’s motion for summary judgment,
appellees urged that the axle shaft was a “product” under R.C. 2307.71 because the shaft
was “entirely the creation of Jarzembski, at the behest of Harts.” Moreover, appellees
argued that Jarzembski was a manufacturer because he was in the business of
manufacturing component parts for the automotive industry. While appellees
4.
acknowledged that Jarzembski primarily manufactured transmission parts and shafts for
trucks, they asserted that Jarzembski could not escape liability simply because the part he
manufactured in this case was integrated into a trike.1 As to whether Harts was a
supplier, appellees urged that Harts had been in the business of selling auto parts for
decades, and that the axle shaft in this case qualified as an auto part.
{¶ 11} Upon consideration of the foregoing arguments, the trial court issued its
decision on the motion for summary judgment on July 11, 2014. In its decision, the trial
court agreed with Harts and Jarzembski that the axle shaft did not fit the definition of a
product under R.C. 2307.71, because appellees specifically asked Harts to “duplicate” the
shaft. Thus, the trial court found that the axle shaft was a custom item made according to
appellees’ design and according to appellees’ request and not entered into the stream of
commerce. Further, the court concluded that Harts and Jarzembski did not meet the
statutory definitions of “manufacturer” or “supplier” under the OPLA. Accordingly, the
court granted the motion for summary judgment, thereby disposing of appellees’ product
liability claims. However, in its entry, the court noted that “[a]ll other matters are
continued for further proceedings, and for trial.” In a later entry clarifying its order, the
court indicated that the “other matters” included claims for negligence and breach of
warranty, which the court determined were sufficiently pleaded in appellees’ complaint.
1
In a subsequent motion for partial summary judgment, appellees sought the court’s
determination that Harts was a manufacturer under R.C. 2307.78(B)(2) upon learning that
Jarzembski was insolvent.
5.
{¶ 12} Almost two months later, Harts and Jarzembski filed a motion for leave to
file a second motion for summary judgment, this time seeking judgment in their favor on
appellees’ negligence and warranty claims based on the assertion that the Ohio Products
Liability Act abrogated all such common law products liability causes of action.
Appellees responded by arguing that this action was no longer governed by the OPLA
following the trial court’s determination that the axle shaft was not a “product” under RC
2307.71.
{¶ 13} On September 23, 2014, the trial court issued its decision on the motion for
leave to file a second motion for summary judgment. In its decision, the trial court found
that the OPLA did not abrogate appellees’ common law claims of negligence and breach
of warranty. Additionally, the court granted appellees leave to file an amended complaint
to more fully set forth their claims for negligence and breach of warranty.
{¶ 14} On October 2, 2014, appellees filed their amended complaint, in which
they asserted several claims including, in relevant part, negligence (against Harts and
Jarzembski), negligent misrepresentation (against Harts), breach of implied warranty of
fitness for a particular purpose under R.C. 1302.28 (against Harts), and breach of implied
warranty of merchantability under R.C. 1302.27 (against Harts and Jarzembski). Two
weeks later, Harts and Jarzembski filed an answer, along with a separate motion for
summary judgment seeking dismissal of appellees’ claims based upon the assertion that
the claims were abrogated by the OPLA under R.C. 2307.71(B).
6.
{¶ 15} Following receipt of appellees’ memorandum in opposition to the second
motion for summary judgment filed by Harts and Jarzembski, the trial court, on
November 26, 2014, issued its decision denying said motion because it deemed that
appellees’ claims were not product liability claims and, consequently, were not abrogated
by the OPLA.
{¶ 16} After several months of discovery, the matter eventually proceeded to a
jury trial on April 28, 2015. The trial, which lasted several days, included testimony
from multiple witnesses including Pamela, Wright, and other members of the Worman
family. Additionally, both parties called expert witnesses ranging from accident
reconstructionists to metallurgical engineers. At the conclusion of the trial, the jury
found in favor of appellees on their claim against Harts for breach of the implied
warranty of merchantability and the implied warranty of fitness for a particular purpose.
The jury found in favor of Harts and Jarzembski as to all remaining claims contained in
appellees’ amended complaint. In total, the jury awarded damages to appellees in the
amount of $2,761,228.15.
{¶ 17} In response to the foregoing verdict, Harts filed a motion for judgment
notwithstanding the verdict on May 22, 2015. In its memorandum in support of the
motion, Harts contended that it was not a “merchant” for purposes of the implied
warranty of merchantability under R.C. 1302.27(A) since it was not in the business of
selling motorcycle or trike parts. Further, Harts asserted that the evidence produced at
trial failed to establish that appellees relied upon Harts’s skill or judgment to select or
7.
furnish a suitable axle shaft, as required under R.C. 1302.28 concerning the implied
warranty of fitness for a particular purpose. In addition, Harts argued that there was no
evidence to demonstrate that the axle shaft was substandard given the fact that it was a
custom-made item that was duplicated in accordance with appellees’ instructions.
{¶ 18} On June 4, 2015, the trial court issued its decision on Harts’s motion. In its
entry, the court found that the question of whether Harts was in the business of selling
motorcycle axle shafts was properly placed before the jury and resolved in appellees’
favor. Further, the court determined that appellees relied upon Harts’s good reputation in
selecting it to duplicate the axle shaft. Although the court agreed that Harts duplicated
the axle shaft according to appellees’ instructions, it found that Harts assumed the risk
that the prior axle shaft was not fabricated according to industry standard. Deferring to
the jury’s ultimate determination, the court found that Harts breached certain “implied
duties and standards.” Thus, the court denied Harts’s motion for judgment
notwithstanding the verdict.
{¶ 19} Thereafter, Harts filed a timely notice of appeal.
B. Assignments of Error
{¶ 20} On appeal, appellant assigns the following errors for our review:
Assignment of Error No. 1: The trial court erred in allowing the jury
to consider Appellees’ claims for bodily injury or death for breach of
implied warranties of merchantability and fitness for a particular purpose,
which the Ohio Product Liability Act abrogates.
8.
Assignment of Error No. 2: The jury’s verdict finding Defendant-
Appellant Hart’s Machine Services, Inc. (“Hart’s”) liable for breach of the
implied warranty of merchantability is against the manifest weight of the
evidence because, based upon the trial court’s factual findings and the
evidence presented at trial, Hart’s was not a “merchant” of the product at
issue.
Assignment of Error No. 3: The jury’s verdict finding Hart’s liable
for breach of the implied warranty of fitness for a particular purpose is
against the manifest weight of the evidence because the evidence presented
at trial shows neither that Hart’s had any reason to know that the decedent,
James Worman, was relying upon its skill or judgment nor that James
Worman in fact relied upon Hart’s skill or judgment in furnishing a suitable
half-shaft for his “trike.”
II. Analysis
A. The OPLA does not abrogate appellees’ claims.
{¶ 21} In its first assignment of error, Harts argues that the trial court erred in
allowing appellees to pursue their claims for breach of the implied warranties of
merchantability and fitness for a particular purpose, where such claims were allegedly
abrogated by the OPLA under R.C. 2307.71(B).
{¶ 22} Whether appellees’ claims were abrogated under R.C. 2307.71(B) is a
question of law that we review de novo.
9.
{¶ 23} According to R.C. 2307.71(B), “[s]ections 2307.71 to 2307.80 of the
Revised Code are intended to abrogate all common law product liability claims or causes
of action.” “Product liability claim” is defined under R.C. 2307.71(A)(13) as “a claim or
cause of action that is asserted in a civil action pursuant to sections 2307.71 to 2307.80 of
the Revised Code and that seeks to recover compensatory damages from a manufacturer
or supplier for death, physical injury to person, emotional distress, or physical damage to
property other than the product in question, * * *.” (Emphasis added.) Further, R.C.
2307.71 contains definitions for “manufacturer” (R.C. 2307.71(A)(9)) and “supplier”
(R.C. 2307.71(A)(15)). Notably, the trial court in this case granted Harts’s initial motion
for summary judgment upon the finding that it was not subject to the OPLA because the
axle shaft at issue was not a “product” and Harts was not a “manufacturer” or “supplier”
under R.C. 2307.71.
{¶ 24} Nonetheless, Harts urges us to apply the abrogation provision within the
OPLA to bar appellees’ remaining claims for breach of the implied warranties of
merchantability and fitness for a particular purpose. In its appellate brief, Harts cites to
Nadel v. Burger King Corp., 119 Ohio App.3d 578, 695 N.E.2d 1185 (1st Dist.1997), and
Stratford v. SmithKline Beecham Corp., 2:07-CV-639, 2008 U.S. Dist. LEXIS 84826(S.D.Ohio 2008), in support of its assertion that appellees’ claims were abrogated by the
OPLA.
{¶ 25} In Nadel, the plaintiffs brought an action against Burger King following an
incident in which they were burned after coffee sold by Burger King spilled from its cup.
10.
In their complaint, plaintiffs included claims for, inter alia, breach of the warranty of
merchantability and breach of the warranty of fitness for a particular purpose, both based
on the allegation that the coffee was too hot to consume, as well as a products liability
claim premised upon a defective product and Burger King’s failure to warn of the
dangers of handling the coffee. Nadel at 583. Burger King was granted summary
judgment at the trial level, and the plaintiffs appealed. On appeal, the First District found
that plaintiffs’ implied warranty claims were abrogated by the OPLA. Id. at 585-86.
However, the court found that plaintiffs’ product liability claims survived summary
judgment, as certain questions of fact existed regarding those claims. In so holding, the
court examined Burger King’s argument that it was immune under the OPLA because it
was not a “manufacturer, seller, or supplier of the coffee under R.C. 2307.71.” Id. at 589.
Notably, the court expressly determined that Burger King was, in fact, a manufacturer as
defined under R.C. 2307.71. Id.
{¶ 26} Likewise, in Stratford, the U.S. District Court for the Southern District of
Ohio found that negligence claims against SmithKline Beecham Corp. were preempted
by the OPLA. Once again, however, there appears to have been no dispute that
SmithKline was a manufacturer under R.C. 2307.71. Indeed, the court described
SmithKline as “a pharmaceutical company involved in research, development, testing,
manufacturing, production, promotion, distribution, and marketing of pharmaceuticals for
distribution, sale and use by the general public, including the antidepressant drug Paxil.”
(Emphasis added.) Stratford at *3.
11.
{¶ 27} Having considered the foregoing decisions, we find them distinguishable
from the case sub judice. As noted above, the defendants in Nadel and Stratford were
clearly subject to the OPLA as manufacturers under R.C. 2307.71. By contrast, the trial
court in this case agreed with Harts’s assertion that it is not a manufacturer or supplier
under the OPLA.
{¶ 28} Ultimately, we find that the claims appellees have asserted against Harts
have not been abrogated by the OPLA under R.C. 2307.71(B), the reach of which is
limited to “product liability claims or causes of action.” Indeed, appellees’ claims cannot
be considered “product liability claims” under R.C. 2307.71, since that term is limited to
claims that seek recovery of compensatory damages “from a manufacturer or supplier”
and Harts has already litigated this issue, leading the trial court to find that it is not a
manufacturer or supplier.
{¶ 29} Accordingly, Harts’s first assignment of error is not well-taken.
B. The jury’s verdict was not against the manifest weight of the evidence.
{¶ 30} In Harts’s second and third assignments of error, it contends that the jury’s
verdict was against the manifest weight of the evidence.
{¶ 31} When reviewing a decision in a civil case for being against the manifest
weight of the evidence, we apply the same standard used in criminal cases. Eastley v.
Volkman, 132 Ohio St. 3d 328, 2012-Ohio-2179, 972 N.E.2d 517, ¶ 17-23. That is, we
must review the entire record, weigh the evidence and all reasonable inferences, consider
the credibility of witnesses, and determine “whether in resolving conflicts in the
12.
evidence, the [trier of fact] clearly lost its way and created such a manifest miscarriage of
justice that the [judgment] must be reversed and a new trial ordered.” State v.
Thompkins, 78 Ohio St.3d 380, 387, 1997 Ohio 52, 678 N.E.2d 541 (1997). In weighing
the evidence, we must be mindful of the presumption in favor of the finder of fact:
[I]n determining whether the judgment below is manifestly against
the weight of the evidence, every reasonable intendment and every
reasonable presumption must be made in favor of the judgment and the
finding of facts. * * * If the evidence is susceptible of more than one
construction, the reviewing court is bound to give it that interpretation
which is consistent with the verdict and judgment, most favorable to
sustaining the verdict and judgment. Eastley at ¶ 21, quoting Seasons Coal
Co., Inc. v. Cleveland, 10 Ohio St.3d 77, 80, 10 Ohio B. 408, 461 N.E.2d
1273 (1984), fn. 3.
{¶ 32} In its second assignment of error, Harts argues that the jury’s finding of
liability on appellees’ claim for breach of the implied warranty of merchantability was
against the manifest weight of the evidence.
{¶ 33} The implied warranty of merchantability is set forth in R.C. 1302.27, which
provides, in relevant part: “(A) Unless excluded or modified as provided in section
1302.29 of the Revised Code, a warranty that the goods shall be merchantable is implied
in a contract for their sale if the seller is a merchant with respect to goods of that kind.”
(Emphasis added.) “Merchant” is defined under R.C. 1302.01(A)(5), as
13.
a person who deals in goods of the kind or otherwise by the person’s
occupation holds the person out as having knowledge or skill peculiar to the
practices or goods involved in the transaction or to whom such knowledge
or skill may be attributed by the person’s employment of an agent or broker
or other intermediary who by the agent’s, broker’s, or other intermediary’s
occupation holds the person out as having such knowledge or skill.
{¶ 34} Focusing on the emphasized portion of R.C. 1302.27 above, Harts asserts
that the evidence does not support a finding that it is a merchant with respect to trike axle
shafts. More particularly, Harts contends that the evidence presented at trial “showed
that Harts had never before sold or made a part for a motorcycle or a trike – let alone a
trike half-shaft.” In support of its position, Harts notes that trial testimony from its
owner, John Buskirk, reveals that Harts does not sell motorcycle or trike parts, and that
the trike axle shaft in this case was the first and only such part it had ever sold. Further,
Harts cites the prior ruling from the trial court on summary judgment, finding that Harts
was not a supplier for purposes of the OPLA because the transaction that took place in
this case was an isolated sale of a custom-made item that was designed by appellees and
not placed into the stream of commerce. In sum, Harts acknowledges that it “may be a
‘merchant’ of machined automobile parts, but it is not a ‘merchant with respect to goods
of [the] kind’ that it sold to James Worman.”
14.
{¶ 35} In response, appellees argue that the evidence elicited at trial established
that Harts was a merchant with respect to goods of the kind at issue here. Appellees also
rely upon Buskirk’s testimony in support of its position.
{¶ 36} On cross examination, Buskirk testified that Harts Machine Services was
known as Harts Auto Parts from its inception in 1926 until the name was changed in
2001. Further, appellees highlight Buskirk’s testimony that 40 percent of Harts’s
business consists of the sale of auto parts provided to Harts by various suppliers
nationwide. Thus, it is clear that Harts is a merchant with respect to auto parts. The only
question remaining, then, is whether an axle shaft for a trike falls within the ambit of auto
parts. Buskirk’s testimony is again illuminative on this question. When asked whether
he had previously hired Jarzembski to manufacture motorcycle parts, as opposed to
standard auto parts, Buskirk responded “I guess I don’t see the distinction of motorcycle
part.”
{¶ 37} Having reviewed the foregoing evidence, as well as the remaining trial
testimony, we find that the jury was presented with evidence from which it could
reasonably conclude that Harts was a merchant with respect to auto parts and, by
extension, motorcycle axle shafts. While Buskirk testified that Harts was not engaged in
the business of selling motorcycle or trike parts, he later acknowledged that there was no
distinction between an auto part and a motorcycle part. He also responded in the
affirmative when asked whether James Worman could rely upon Harts’s reputation for
providing a good quality shaft. Thus, we cannot say that the jury’s determination of
15.
liability on appellees’ claim for breach of the implied warranty of merchantability was
against the manifest weight of the evidence.
{¶ 38} Accordingly, Harts’s second assignment of error is not well-taken.
{¶ 39} In its third assignment of error, Harts argues that the jury’s verdict finding
it liable on appellees’ claim for breach of the implied warranty of fitness for a particular
purpose was against the manifest weight of the evidence.
{¶ 40} R.C. 1302.28 sets forth Ohio’s implied warranty of fitness for a particular
purpose, as follows:
Where the seller at the time of contracting has reason to know any
particular purpose for which the goods are required and that the buyer is
relying on the seller’s skill or judgment to select or furnish suitable goods,
there is unless excluded or modified under section 1302.29 of the Revised
Code an implied warranty that the goods shall be fit for such purpose.
{¶ 41} Under R.C. 1302.28, three requirements must be met in order for an
implied warranty of fitness for a particular purpose to exist: (1) the seller must have
reason to know the buyer’s particular purpose; (2) the seller must have reason to know
that the buyer is relying on the seller’s skill or judgment to furnish appropriate goods, and
(3) the buyer must, in fact, rely upon the seller’s skill or judgment. Hollingsworth v. The
Software House, Inc., 32 Ohio App.3d 61, 65, 513 N.E.2d 1372 (2d Dist.1986).
16.
{¶ 42} Here, Buskirk testified that he was aware of appellees’ intention to install
the axle shaft on their self-assembled trike. Thus, the first element is supported by the
evidence in this case.
{¶ 43} While Harts acknowledges that the first element has been met in this case,
it argues that there is no evidence to support the jury’s conclusion that the second and
third elements are met. Specifically, Harts contends that it had no reason to believe that
appellees were relying upon its skill or judgment where appellees were merely seeking a
duplicate of the axle shaft that had previously failed (the “McCabe shaft”). Further, Harts
asserts that there is no evidence to demonstrate that appellees actually relied upon Harts’s
skill or judgment.
{¶ 44} Concerning the second and third elements, Wright and Buskirk each
testified that appellees initially asked Harts to weld together the broken axle shaft that
had previously failed. However, Buskirk insisted that welding the existing shaft would
only weaken it, and that a new shaft would need to be fabricated. In reliance upon
Buskirk’s recommendation, appellees agreed to purchase a new axle shaft. According to
Wright, appellees did not provide Harts with any instructions as to how the axle shaft was
to be fabricated, but, rather, relied upon Harts’s expertise in providing such parts.
{¶ 45} In light of the foregoing evidence, we find that a jury could reasonably
conclude that Harts had reason to know that appellees were relying on its skill or
judgment to furnish an appropriate axle shaft, and that appellees did, in fact, rely upon
such skill or judgment. The cases cited by Harts in support of its position are inapposite
17.
here since they deal with situations in which the purchaser provides the seller with
detailed specifications on the item it wishes to purchase. As noted above, appellees did
not provide Harts with such specifications, but rather, relied upon Harts, a reputable auto
parts dealer, to provide them with an acceptable axle shaft for their trike. Thus, we find
that the jury’s verdict on appellees’ claim for breach of the implied warranty of fitness for
a particular purpose is not against the manifest weight of the evidence.
{¶ 46} Accordingly, Harts’s third assignment of error is not well-taken.
III. Conclusion
{¶ 47} In light of the foregoing, we affirm the judgment of the Fulton County
Court of Common Pleas. Costs are hereby assessed to Harts in accordance with App.R.
24.
Judgment affirmed.
A certified copy of this entry shall constitute the mandate pursuant to App.R. 27.
See also 6th Dist.Loc.App.R. 4.
Mark L. Pietrykowski, J. _______________________________
JUDGE
Arlene Singer, J.
_______________________________
Stephen A. Yarbrough, J. JUDGE
CONCUR.
_______________________________
JUDGE
This decision is subject to further editing by the Supreme Court of
Ohio’s Reporter of Decisions. Parties interested in viewing the final reported
version are advised to visit the Ohio Supreme Court’s web site at:
http://www.sconet.state.oh.us/rod/newpdf/?source=6.
18.