RP1 Fuel Cell, LLC v. United States

In the United States Court of Federal Claims
No. 13-552C
Filed: March 31, 2015
*************************** *
RP1 FUEL CELL, LLC and UTS SJ-1, *
LLC, * American Recovery and
* Reinvestment Tax Act; Section 1603;
Plaintiffs, * Internal Revenue Code §§ 45, 48;
v. * Fuel Cell Power Plant; Gas
* Conditioning Equipment; Trash
UNITED STATES, * Facility; Municipal Solid Waste.
Defendant. *
*
*************************** *
Timothy L. Jacobs, Hunton & Williams LLP, for plaintiffs. With him were David
S. Lowman, Jr., and Hilary B. Lefko, Hunton & Williams LLP.
Michael J. Ronickher, Trial Attorney, Court of Federal Claims Section, Tax
Division, United States Department of Justice, Washington, D.C., for defendant. With
him were Caroline D. Ciraolo, Acting Assistant Attorney General, Tax Division, David I.
Pincus, Chief, Court of Federal Claims Section, Tax Division, and G. Robson Stewart,
Assistant Chief, Court of Federal Claims Section, Tax Division.
OPINION
HORN, J.
Plaintiffs RP1 Fuel Cell, LLC (RP1), and UTS SJ-1, LLC (SJ-1) have brought suit
against the United States alleging they are entitled to “payment of the cash grant
amounts mandated by section 1603 of the American Recovery and Reinvestment Tax
Act of 2009,” Pub. L. No. 111-5, Div. B, tit. I, § 1603, 123 Stat. 115, 364–66 (2009)
(ARRTA, § 1603, or Section 1603). Under the Section 1603 program, the Secretary of
the Treasury, upon application, “shall, subject to the requirements of this section,
provide a grant to each person who places in service specified energy property to
reimburse such person for a portion of the expense of such property.” Section 1603(a).
In plaintiffs’ case, the grant is equal to thirty percent of the allowed cost basis of the
qualifying energy property. See Section 1603 (b)(2)(A). The parties have stipulated that
“[t]he Section 1603 program is administered by the Office of the Fiscal Assistant
Secretary at the Department of Treasury (‘Treasury’).”
Plaintiffs allege that they “placed in service two fuel cell power plants,” one by
RP1, and the other by SJ-1, and that each of the plaintiffs “filed an application for a
grant for the eligible costs of constructing the Fuel Cells” pursuant to Section 1603.
Plaintiffs allege that they included in the cost basis for the grants “the Fuel Cells and
their associated gas conditioning equipment,” 1 but that the United States Department of
the Treasury did not allow as part of the cost basis “all direct and indirect costs relating
to the associated gas conditioning equipment.” Plaintiffs contend that the government
“was required to make payment of the applied-for amounts to RP1 and SJ-1 because
the associated gas conditioning equipment is ‘specified energy property’ under Section
1603,” and that including the gas conditioning equipment as part of the cost basis for
the grant is “permitted under Section 1603, the Treasury Guidance, and the cost basis
rules under the [Internal Revenue] Code.” Plaintiffs seek the amount of additional cash
grant that they allege should have been awarded if the gas conditioning equipment had
been included as part of the grant’s cost basis, $1,515,020.00 between the two
facilities, 2 as well as request that the decision by the Secretary of the Treasury be
vacated. 3
1 The parties jointly define “[g]as conditioning equipment” to mean “[e]quipment used to
clean, treat, and process contaminants (e.g., sulfur, hydrogen sulfide, VOC [volatile
organic compounds], and siloxanes) from a fuel,” such as the biogas from an aerobic
digester that is to be used as fuel for a fuel cell.
2 The parties jointly stipulated that RP1 requested in its Section 1603 application “a
payment of $4,959,896 or 30 percent of SJ-1’s reported cost basis of $16,532,985.” The
parties also stipulated that, “[o]n January 14, 2013, Treasury issued a ‘Section 1603
Award Letter’ to RP1 in which it approved a payment of $4,026,253 for the RP1 Project”
based on a reduced basis amount of $13,420,843. The parties further stipulated that
SJ-1 “requested a payment of $2,784,734 or 30 percent of its reported cost basis of
$9,282,447,” “voluntarily removed $216,320” from its reported cost basis during
Treasury’s review process, reducing it to $9,066,127. Moreover, according to the
parties’ stipulation, “[o]n March 1, 2013, Treasury issued a ‘Section 1603 Award Letter’
to SJ-1 in which it approved a payment of $2,085,055 for the SJ-1 Project” based on a
reduced basis amount of $6,950,182.
3 The parties jointly stipulated that “[f]uel cells convert a fuel into electricity through an
electrochemical process, without combustion. Fuel cells can operate on various fuels,
including biogas, if the inherent contaminants are removed to meet the fuel cell
manufacturer’s fuel specifications.” Throughout the trial and briefs, however, the parties
refer to the various components and systems involved differently. Except when quoting
from the parties, the court adopts the following terminology for purposes of this opinion:
• “Fuel cell,” “fuel cell stack,” or “fuel cell module” refers, as stipulated by the
parties, to “the individual piece of equipment that actually performs the
electrochemical conversion of the fuel into DC [direct current] electric power,”
using an anode and a cathode. The parties state that the three terms are
interchangeable, but also indicate that, alternatively, a “fuel cell stack” can refer
to “[a] combination or ‘stack’ of individual fuel cells,” and a “fuel cell module” can
refer to a set of “four separate fuel cell stacks and housing.” The terms “fuel cell,”
“fuel cell stack,” or “fuel cell module” do not include the gas conditioning
2
FINDINGS OF FACT
According to the parties’ joint stipulation, RP1 and SJ-1 are Delaware, limited
liability companies with their principal places of business in California, and both are
wholly-owned subsidiaries of UTS BioEnergy, LLC. The parties further stipulated that
UTS BioEnergy is more than eighty-percent owned by Anaergia, a Canadian
corporation “engaged in the generation of renewable energy from organic waste.”
Plaintiffs’ witness, Arun Sharma, who, at the time of trial, testified he was “president of
Anaergia North America,” explained that Anaergia “is in the business of resource
recovery. Our projects typically include recovery of renewable energy, water, nutrients,
and fertilizer from waste streams.” Regarding the RP1 and SJ-1 projects, Mr. Sharma
stated he was “vice president of development at the time of the projects,” in 2010 and
2011, but also indicated that he may have been promoted to “president of UTS
BioEnergy,” before completion of the projects. Mr. Sharma indicated that these projects
were Anaergia’s and UTS BioEnergy’s first fuel cell projects. Mr. Sharma testified that
Anaergia has performed a number of projects in the United States and abroad that
create natural gas or electrical power from the digestion of organic waste, whether at a
wastewater treatment facility or at another source of organic waste, such as a farm.
Mr. Sharma testified that Anaergia’s interest in the fuel cell projects at issue
developed because “they had some component of wastewater treatment where the
digester gas was available and could be converted into electrical energy.” Mr. Sharma
further testified that the company’s interest in these projects was because, “at the time,
section 1603 grant and self-generation incentive program was available, and after
discounting or reducing the project costs by that particular incentive, the projects
penciled out very well for the municipality, and we were able to offer a low rate for
electrical energy to the customers.” 4 According to Mr. Sharma, the RP1 and SJ-1
equipment at issue in this case, or any other items the parties generally referred
to as “balance of plant,” such as the natural gas desulfurizer, foundations, water
treatment unit, and adjoining electrical equipment and piping.
• “Fuel cell assembly” refers to the set of “fuel cell equipment” supplied by FuelCell
Energy and what the government admits is “balance of plant” for a fuel cell, such
as the natural gas desulfurizer, foundations, water treatment unit, and adjoining
electrical equipment and piping. “Fuel cell assembly” does not include the gas
conditioning equipment at issue in this case.
• “Fuel cell facility” or “fuel cell project” refers broadly to all the equipment installed
at either the RP1 or SJ-1 sites by plaintiffs, and includes the “fuel cell assembly”
as well as the gas conditioning equipment at issue in this case.
4 Mr. Sharma testified at trial that outside of the Section 1603 grant, neither UTS
BioEnergy nor Anaergia received other federal tax credits. The court notes that the
parties sometimes refer to the Section 1603 grant as the “ITC grant,” or Investment Tax
Credit grant.
3
projects were infeasible without the “grants and incentives,” including incentives that Mr.
Sharma understood covered the gas conditioning equipment. Mr. Sharma also testified
that the projects using digester gas were of interest, because, while the digester gas
was free, “it’s not economic to work on natural gas alone because then you have to pay
for natural gas.”
The RP1 Fuel Cell Project
The parties have stipulated that the RP1 fuel cell system is located at the
Ontario, California, Inland Empire Utilities Agency (or IEUA) Regional Plant No. 1,
wastewater, treatment plant. The parties further stipulated that the Regional Plant No. 1
“collects and treats municipal wastewater and biosolids and supplies drinking water.”
The parties further stipulated that the plant “includes anaerobic digesters, owned and
operated by IEUA, that utilize microorganisms to break down the solids portion of the
wastewater sludge.” According to the parties’ joint stipulation, “[t]hese digesters produce
both ‘biosolids’ and ‘biogas,’ consisting of methane, other gaseous elements, and
various contaminants. Biosolids are used to produce compost. Biogas may be
discarded by burning it (in a process called ‘flaring’) or may be used as a fuel source.”
According to the parties, prior to the installation of the RP1 fuel cell system, the biogas
from Regional Plant No. 1 was used as a fuel source for “two 1.4 MW cogeneration
engines.” The parties stipulated that “[d]ue to concerns with cost, reliability, and
regulatory and environmental factors, IEUA desired to replace these engines with a fuel
cell system.” Mr. Sharma testified at trial:
At the time, the Air Quality Management District, this[,] which is the South
Coast Air Quality Management District, was not satisfied with the
emissions profile [of the combustion engines] going forward, and they
wanted them to have an alternative use for the gas or this fuel. And the
only technology that was available to convert this fuel cleanly into
electricity far better than internal combustion engine was fuel cell
technology.
Mr. Sharma indicated at trial that the IEUA did not have “any interest in a fuel cell that
would operate on natural gas alone.” A February 17, 2012 press release issued by
IEUA, provided as a joint exhibit, stated that “IEUA is also adding fuel cells to its
renewable energy portfolio. Installation of 2.8 megawatts powered by fuel cells
operating on bio-gas and natural gas is underway and will be operational this spring.”
Mr. Sharma testified at trial that part of the financial incentive for the RP1 project
came from the California Self-Generation Incentive Program (or SGIP). Mr. Sharma
explained:
SGIP is called the Self-Generation Incentive Program, which is
administered in the state of California by the utilities, and that is to
promote cogeneration and fuel cell-type projects. And that basically
provides a grant to make these projects happen.
4
And this grant was fairly significant for our projects. And it was
included as part of the economics for the entire project to provide a rate of
electricity to the customer that would be palatable and would be in line
with what the customer would have to pay to the utility.
Mr. Sharma explained that, to be eligible for the Self-Generation Incentive Program
grant, “at least 75 percent of the fuel has to be renewable fuel, like biogas, and 25
percent could be substituted with natural gas.” The June 25, 2012 “Self-Generation
Incentive Program Handbook,” (emphasis in original), issued by the administrators5 of
the Self-Generation Incentive Program, and provided as a joint exhibit, also explains
that “[i]f it is determined that Directed Biogas Renewable Fuel deliveries fell below 75%
of the generator’s fuel demand during any 1 year period within the warranty period, a
refund of a portion of the incentive will be required.”
The request from IEUA for proposals for the Regional Plant No. 1 fuel cell
project, which was submitted as a joint exhibit, stated: “[t]he purpose of the proposed
fuel cell construction is to replace the current power generation system at RP1
[Regional Plant No. 1] and utilize digester gas as the primary fuel supply.” The request
for proposal’s “SCOPE OF WORK,” (emphasis and capitalization in original), stated:
The Agency seeks a Vendor to provide turnkey engineering, design,
materials, delivery, installation, testing, and commissioning of a cost-
effective and energy efficient fuel cell system that will maximize the use of
digester gas and increase the renewable energy resource potential at
IEUA. The Vendor shall include in the proposed scope of work all
necessary work, labor, taxes, services, equipment, appurtenances, and
incidentals necessary to produce a fully functional and operational fuel cell
system, including a fuel cleaning system for the available quality of
digester gas, a heat recovery system for use by the Agency, and include
the interconnection to the main utility service.
The request for proposals stated that “[a]ll proposals should be based upon the
available digester gas and be designed to utilize 100% of this fuel supply without
exceeding the SGIP limitations on natural gas.” Mr. Sharma testified that “[t]he
requirement was that all the biogas that was available had to be used for the fuel cell,
and if there was insufficient biogas available, then you could blend natural gas or use up
to 25 percent natural gas.” The utility agency also asked vendors to include information
on “[g]as cleaning system performance,” “[m]aintenence requirements and frequency of
all major components including the gas cleaning system.” Mr. Sharma testified that the
gas conditioning system was required by the IEUA and the Self-Generation Incentive
Program as part of project. According to Mr. Sharma, “[t]hey were explicit about having
5The administrators of the Self Generation Incentive Program included Pacific Gas and
Electric, Southern California Edison, the Southern California Gas Company, and the
California Center for Sustainable Energy.
5
the gas conditioning equipment at this plant, but by design, if the fuel was supposed to
be biogas, the gas conditioning system de facto would have been part of the power
plant.”
Mr. Sharma indicated at trial that the burden of supplying sufficient biogas for
operation of the RP1 project lay with the IEUA, and that “[i]f Inland Empire fails to
provide sufficient digester gas, they have to make up with natural gas.” The record
indicates that the power purchase agreement for the RP1 project stated that
“PURCHASER [IEUA] shall provide Seller [RP1], at no cost to Seller, the fuel required
to operate the fuel cell at the maximum designed capacity of 2.8 MWac. The fuel will
consist primarily of digester gas (a minimum annual average of 612,000 cft [cubic
feet]/day).” (capitalization in original). The power purchase agreement further specified
quality limits for the digester gas, for example, stating: “Purchaser agrees to control
hydrogen sulfide at an annual average of 180 parts per million by volume.” Mr. Sharma
also indicated, however, that assuming sufficient biogas was available, UTS BioEnergy
was at risk if the gas conditioning equipment did not work: “[I]f the gas conditioning
equipment is not available, then we track it separately and we pay for that fuel, we as
RP1 or UTS pays for that fuel . . . .” The RP1 power purchase agreement states that the
gas conditioning equipment for the project is to be able to operate, if needed, “at full
load with 100% digester gas flow to the fuel cell (approximately 830,000 cft/day).” The
record also states that “Seller [RP1] shall provide any necessary future gas cleaning
system upgrades to meet the requirements of the fuel cell system at no cost to the
Purchaser.”
It appears from the record that RP1 or its parent, UTS BioEnergy, submitted a
successful bid and was awarded the contract for Regional Plant No. 1. Mr. Sharma
explained at trial that “[t]here was an RFP [request for proposal] released by Inland
Empire Utilities Agency, and UTS responded to that RFP. We were one of the many
respondents. And we negotiated a power purchase agreement later with the utility.” Mr.
Sharma added that “there was an interview. There were several interviews. There was a
lot of negotiations, finally led to an award . . . .” Mr. Sharma also stated that there was
no prior business relationship between the agency and UTS BioEnergy or Anaergia.
The record contains the “FUEL CELL POWER PURCHASE AGREEMENT,”
(capitalization in original), between RP1 Fuel Cell, LLC, and the IEUA. The power
purchase agreement was for a “fuel cell facility” consisting of a “Fuel Cell power plant
and ancillary equipment, as further described in the body of this Agreement and Exhibit
B and Exhibit D, providing a total gross electrical generating capacity of approximately
2.8 megawatts.” (emphasis in original). Exhibit B, “FACILITY EQUIPMENT
SPECIFICATIONS,” discussed the fuel cell system’s technical requirements, including
that of the “Gas Cleaning System.” (emphasis and capitalization in original). Under
Exhibit D, Part B, “SCOPE OF WORK,” (capitalization in original), the following was
included:
The Seller shall provide turnkey engineering, design, materials, delivery,
installation, testing, commissioning, and operation and maintenance of a
6
cost-effective and energy efficient fuel cell system that will maximize the
use of digester gas and increase the renewable energy resource potential
at the delivery point. The Seller shall include in the scope of work all
necessary work, labor, taxes, services, equipment, appurtenances, and
incidentals necessary to produce a fully functional and operational 2.8
MWac fuel cell system, including a fuel cleaning system for the available
quality of digester gas, 4.1 million BTH heat recovery system for use by
the Purchaser, and include the interconnection to the main utility service.
Mr. Sharma testified that there was also an “[u]ptime requirement” for the RP1
project under the power purchase agreement, which is “a requirement so that the fuel
cell is functioning some certain number of hours in a year.” Mr. Sharma explained that,
according to his understanding, the uptime requirement was in place because “if the fuel
cell equipment was not up and running, then this renewable fuel [the anaerobic digester
biogas] would have to be flared.” Mr. Sharma indicated that the uptime requirement is in
place regardless of whether the digester gas conditioning equipment was operational,
and the RP1 project could run on natural gas in the interim, because the natural gas
“runs through a different gas conditioning equipment,” discussed below as a fuel
desulfurizer.
The parties also stipulated that, additionally, “RP1 and IEUA entered into a Fuel
Cell Site Lease and Easement, dated October 1, 2010, providing for RP1’s lease of an
area consisting of approximately four thousand (4,000) square feet on property owned
by IEUA at its Regional Plant No. 1 for purposes of locating and operating the RP1
Project.” Mr. Sharma explained at trial that “typically when you have a service contract
you also have a site lease or an easement where you have rights to access the site to
build your power plant and service the contract.” A number of easement documents are
also included in the record, such as an “Access easement,” and a “gas pipeline
easement.”
A review of the record indicates that RP1 contracted with multiple other parties to
complete construction of the fuel cell system. The parties stipulated that RP1 and HDR
Design-Build, Inc. entered into a contract “with respect to the design and build of the
RP1 Project.” 6 Mr. Sharma stated at trial that HDR Design-Build, is “a large engineering
and construction company that undertake [sic] tasks like that, and they’re very well-
known in the wastewater treatment industry.” It appears that HDR Design Build did not
actually manufacture the key components, but, instead, was responsible for unloading
6 The parties alternate between describing the contractor responsible for overseeing the
overall project assembly as a “design-build” contractor, versus an engineering,
procurement, and construction (EPC) contractor. Mr. Markell, defendant’s expert
witness, testified as to his understanding of the difference between the two types of
contractors: “The relevant difference is, in an EPC contract, the contractor usually does
everything. They will design, buy and procure, and then build the plant. And in addition
to that, typically they’ll provide what they call a wrap guarantee, so they’ll guarantee the
entire project.”
7
and installing the “fuel cell module, water treatment, main process, exhaust stack, and
fuel desulfurization skids,” as well as unloading the “PCU [power conditioning unit],
Transformer, switchgear, heat exchanger, gas conditioning equipment and 1500 KVA
load leveler,” among other tasks. The contract also indicates that HDR Design Build
was to install the project’s piping and electrical equipment.
The parties stipulated that “RP1 and FuelCell Energy, Inc. (‘FuelCell Energy’)
entered into a Sales Contract for Direct FuelCell (DFC) Power Plants, dated October 29,
2010, for RP1’s purchase of a 2.8 MW DFC-3000 fuel cell power plant from FuelCell
Energy for the RP1 Project.” Plaintiffs’ witness, Anthony Leo, Vice President of
applications and Advanced Technologies for FuelCell Energy, testified that “FuelCell
Energy is in the business of manufacturing, developing, in some cases installing,
servicing fuel cell power plants,” and that its “main commercial product line is a specific
type of fuel cell called the molten carbonate fuel cell.” Mr. Leo testified that the sales
contract was their standard form agreement. The sales contract, provided to the court
as a joint exhibit, specified that the fuel cell would be a “carbonate-based fuel cell power
plant utilizing Seller's Direct FuelCell® technology.” An article in FuelCellToday about
the RP1 project, also submitted as a joint exhibit, stated that the fuel cell built was of the
“molten carbonate” type. The parties further stipulated that RP1 entered into a “Service
Agreement for Direct FuelCell (DFC) Power Plants dated October 29, 2010, in
connection with the RP1 Project,” with FuelCell Energy. Mr. Sharma testified at trial that
FuelCell Energy was chosen because “FuelCell Energy makes the only large fuel cell
that can work on biogas,” and also stated that “at that scale, they are the only
manufacturer in -- actually globally.” Mr. Sharma testified at trial that the warranty
provided by FuelCell Energy for its equipment only covered the equipment the company
provided, and not the equipment supplied by other contractors, such as the gas
conditioning equipment. Mr. Leo also indicated at trial that if the gas conditioning
equipment failed and, therefore, incompatible fuel entered and damaged the fuel cell,
UTS BioEnergy would have to pay for repairs to the fuel cell assembly, not FuelCell
Energy. FuelCell Energy was not responsible for the operation of the gas conditioning
equipment.
The parties stipulated that, for the gas conditioning equipment, “RP1 and ESC
Corp. [Environmental Systems and Composites Corporation] entered into a UTS
Equipment Purchase Agreement dated March 2, 2011, for the purchase by RP1 of a
digester gas fuel conditioning system for the RP1 Project.” The scope of work for the
purchase contract with ESC Corporation stated that “ESC Corporation is responsible for
process design and Original Equipment Manufacturing procurement required for the
ESC Digester Gas Fuel Conditioning System.” Mr. Sharma answered in the affirmative
at trial that ESC Corporation was chosen “in part based on the fuel specifications from
FuelCell Energy,” and stated that the equipment “was designed to meet the
specification of the fuel that would enter the stack.” Sarwan Wason, plaintiffs’ expert
witness, stated that: “There are two main suppliers, ESC and AFT,” and that “[t]hese
two companies have provided gas conditioning equipment on all of our projects.”
8
The parties additionally stipulated that “[t]he heat recovery system for the RP1
Project was supplied by Cain Industries, pursuant to a contract with RP1.” As for other
suppliers, Mr. Sharma stated at trial that “there was equipment supplied. Concrete and
pipes and transformers and inverters, you know, were supplied by different contractors,
and they were all integrated by HDR [Design-Build].” The parties stipulated that
“[a]dditional property in the RP1 Project includes the concrete foundations[ 7] for the
equipment, mechanical piping and interconnection lines, a second transformer, a
second switchgear, and electrical instrumentation provided by HDR [Design-Build].”
The parties dispute the specific commercial operation date of the RP1 project.
According to the parties’ joint stipulation, “[t]he RP1 Project began commercial
operations on September 11, 2012, utilizing natural gas to produce power for delivery to
the IEUA grid and using the heat recovery system to capture excess heat from the fuel
cell.” On November 9, 2012, according to the parties, “[t]he RP1 Project achieved the
required 75% digester gas blend.” 8 A November 9, 2012 letter from Joseph C. Fuller,
Project Manager for FuelCell Energy, the supplier of the fuel cell, to Scott Warfield, Vice
President of Operation for UTS BioEnergy, stated that “[d]ata has been collected
showing that the Fuel Cell Power Plant was running at 76% anaerobic digester gas at
2800kW for one hour duration.” At trial, Mr. Sharma discussed his understanding of the
“commercial operation date” within the power purchase agreement between RP1 and
UTS BioEnergy. At trial, Mr. Sharma stated “the commercial operation date occurs
when all the systems and subsystems of the entire power plant are running and
functioning properly as intended. And that includes the gas conditioning equipment that
would be required to clean the biogas as well. And the commercial operation date is the
beginning of the term of the contract.”
Mr. Leo from FuelCell Energy testified at trial that FuelCell Energy was involved
in commissioning 9 the RP1 project. He stated that the commissioning process involves
“the initial turn-on of all the various subsystems, the initial heat-up of the complete
system, and the initial power ramp to full power.” Mr. Leo testified that “[i]f we provided
the [gas conditioning] equipment, we would commission it at the same time. If it was
provided by a third person, then that third person has to commission the equipment
before we can commission our equipment.” Mr. Leo further testified that a third-party
7 The parties jointly explain that the terms “foundation,” “base,” “pad,” and “platform,”
have “been used interchangeably in this case,” but all similarly refer to “a general
description of the concrete floor structure of a facility or the underlying concrete
structure for specific pieces of equipment,” upon which the pieces of equipment stand.
8 The RP1 power purchase agreement with the IEUA stated: “Seller [RP1] requires a
regular minimum operating ratio of 75% digester gas and 25% natural gas.”
9 The parties switch between using the word and phrase “commissioning” and “placed in
service” in their briefs and at trial. Donald Edward Settle, defendant’s witness and
“senior project leader 4” at the National Renewable Energy Laboratory (NREL),
indicated at trial that the two terms have interchangeable meanings, but “for tax
purposes, ‘placed in service’ is the expression that’s used.”
9
gas conditioning equipment would have to be commissioned before the FuelCell Energy
fuel cell could be commissioned: “The electrical connection is through us because it’s
part of our balance of plant, so we have to at least be electrically all connected, and
then they can commission it. And then when it’s up and running and making fuel, we
can start our power ramp.” Mr. Leo affirmed at trial, however, that natural gas is “used to
heat up and begin the process of generating electricity,” during commissioning. Mr. Leo
testified that during the commissioning of the system the fuel cell “can be switched over
to the digester gas anytime during the power ramp.” Mr. Leo also testified that the
commissioning of the plants separately is done “just so that you can verify the dual-fuel
operation,” but that they are separate commissioning events. Nonetheless according to
Mr. Leo, “it’s all one commissioning from a commercial standpoint, but there are
separate sort of subprocesses.” Mr. Leo further testified that the commissioning process
by FuelCell Energy is structured, in part, for convenience concerns, and
is configured to operate with natural gas because that’s the fuel that we
are most confident will be available when we need it, so for the initial heat-
up, that’s why it's configured for natural gas. It could be configured for
digester gas, but it’s more common to configure it for natural gas.
Mr. Wason, plaintiffs’ expert witness also admitted that although the RP1 and SJ-1
projects started on natural gas “as a matter of practice,” the choice to start a fuel cell on
natural gas or digester gas was not technical, but procedural in nature. Mr. Wason
testified: “They have to test their equipment, okay, on digester gas as well as natural
gas, so whether you first test on natural gas and then on digester gas or you first test on
digester gas and then natural gas, it doesn’t make any difference . . . .” Mr. Wason
indicated it was easier to test on natural gas because it is a simpler pipeline connection
to FuelCell Energy’s fuel cell.
At trial, Mr. Sharma also discussed the monthly operations reports of the “fuel
cell power plant.” The reports showed both “Fuel Cell Availability” and “DG [Digester
Gas] Treatment Availability” as a percentage of operating time per month. Mr. Sharma
explained that separate statistics were kept for both fuel cell assembly operation and
gas conditioning equipment operation, because:
for the purpose of SGIP [Self-Generation Incentive Program] tracking, we
are required to ensure that we run 75 percent on biogas and no more than
25 percent on natural gas. . . . Because of these two reasons, we are
supposed to -- we have to track natural gas usage as well as the gas
conditioning uptime and the fuel cell uptime separately.
Mr. Sharma testified that the reasons for tracking the statistics was not only to make
sure the project was meeting the Self-Generation Incentive Program requirements, but
also because “it’s your responsibility. If the gas conditioning system is down for some
reason, then you have to pay for it.”
10
Contained in the record is a press release from the IEUA, dated October 15,
2012, which states in part:
A 2.8 megawatt fuel cell power plant, owned and operated by Anaergia
Services – a division of Anaergia Inc. recently came on-line at the Inland
Empire Utilities Agency’s (IEUA) Water Recycling Plant located in Ontario
California. Installation of the fuel cell plant assists IEUA with implementing
its renewable energy program and removes a significant risk factor
regarding compliance with any future changes to clean air regulations.
Digester gas has historically been used at IEUA’s treatment plant to
provide a fuel for cogeneration engines that provided energy to other
processes within the facility. However, since regulatory requirements
regarding power generation emissions continue to become more stringent,
IEUA entered into a private-public partnership with Anaergia to efficiently
convert the waste biogas into ultra-clean electricity.
A press release from FuelCell Energy, also submitted as a joint exhibit, noted that the
RP1 fuel cell project was the “LARGEST RENEWABLE BIOGAS FUEL CELL
INSTALLATION OPERATING IN THE USA,” (emphasis in original), and that it “meets
almost all of IEUA’s baseload power needs at the Regional Plant 1,” “assists IEUA with
implementing its renewable energy program and removes a significant risk factor
regarding compliance with any future changes to clean air regulations.”
Below is an aerial picture of the RP1 project, provided as a joint exhibit
containing both the fuel cell system and the gas conditioning equipment; as situated
within the wastewater treatment plant area. The court has identified the location of the
RP1 project within the picture:
11
Moreover, the parties provided a close-up picture of the RP1 project. Mr. Sharma
explained at trial that the fuel cell assembly was in the foreground and the gas
conditioning equipment in the background.
13
RP1 Project Costs
Item Estimated Cost
“Construction & Equipment”
$2,640,122.00
(from HDR Design-Build)
“Fuel Cell Equipment”
$8,944,489.00
(from FuelCell Energy)
“Gas Conditioning Equipment”
$2,315,973.00 10
(from ESC Corporation)
“Other Equipment,
Supplies & Materials” $290,196.00
(primarily the Heat Recovery
Unit from Cain Industries)
“Soft Costs”
$2,425,540.00
(primarily tax, interest, and labor)
TOTAL: $16,616,320.00
The SJ-1 Fuel Cell Project
The parties have stipulated that:
SJ-1 owns and operates 1.4 MW fuel cell facility consisting of a fuel cell
power plant and ancillary equipment (the “SJ-1 Project”) located at the
City of San Jose (“San Jose”) Water Pollution Control Plant (“WPCP”) in
County of Santa Clara, California. . . . San Jose’s WPCP collects and
treats wastewater and biosolids from domestic, commercial, and industrial
sources.
The court notes that the basic facts behind the installation of the RP1 and SJ-1
projects are largely similar. Mr. Sharma testified that, compared to the RP1 project,
“[t]here are subtle differences, but they’re very similar.” He explained that, primarily, “SJ-
1 is about half the size of RP1.” The parties also stipulated that, as with the IEUA
facility, “San Jose’s WPCP also includes anaerobic digesters, owned and operated by
San Jose, which produce biosolids and biogas from the processing of WPCP’s
wastewater sludge.” According to the parties:
Prior to the installation of the SJ-1 Project, this biogas was used, along
with purchased natural gas and landfill gas, to fuel on-site engine
generators that produced an average of 5.2 MW of electricity. When the
10 Plaintiffs also state in their complaint that the “direct costs of the gas conditioning
equipment were $2,315,973 and the indirect costs included a pro rata portion
(approximately 21 percent) of the build-design contract costs, sales taxes, and other
costs.”
15
generators needed to be replaced due to age, San Jose decided to
replace them with a fuel cell system.
As stipulated to by the parties, “San Jose issued a ‘Request for Proposal,’ RFP
09-10-32, Power Purchase & Site Lease Agreement for Fuel Cell Power Production
System, dated June 29, 2010, for the purchase of electricity from a fuel cell system to
be constructed, owned, and operated by the successful party.” The request for
proposals for the San Jose Water Pollution Control Plant fuel cell system was provided
as a joint exhibit. The request for proposals stated under “BACKGROUND
INFORMATION” that pursuant to the California Energy Commission Self Generation
Incentive Program, “the Water Pollution Control Plant (WPCP) has been approved for
an amount to be determined for Fuel Cell Power generation of 2.8 MW. [San Jose] City
intends to take this unique opportunity to move WPCP towards higher efficiency and
achieving a renewable energy goal of 100 percent.” (capitalization and emphasis in
original). The request for proposals also stated that “[t]his project is a part of the City’s
‘Green Vision’” and “a part of [San Jose Water Pollution Control] Plant’s goal of
achieving overall higher energy efficiency and 20% reduction of energy consumption by
the end of year 2012.”
According to Mr. Sharma, although the RP1 project required only 75% biogas
and could run on 25% natural gas, the San Jose request for proposals preferred that the
SJ-1 fuel cell facility operate 100% on anaerobic digester biogas. Mr. Sharma testified
at trial that this increased minimum biogas use requirement was possible because “in
this case, they [San Jose] had sufficient biogas fuel to supply hundred percent for this
biogas power plant, so the 75/25 question did not arise at that point in time.” Under the
San Jose request for proposals’ “SCOPE OF SERVICES,” (capitalization and emphasis
in original), the contract awardee would be required to “provide all materials and
equipment including the digester gas clean-up skid,[ 11] to condition the methane gas for
use, labor, including consumables except listed under City Responsibilities, required for
maintenance and operation of the Fuel Cell System Power Plant on a seven (7) day a
week, twenty four hour (24) per day basis . . . .” The request for proposals also stated
that the plant was “to be operated on plant digester gas, with the resulting electrical
output to be sold to the City for an agreement term of 20 years. All the generated
electrical power will only be used onsite.”
As with the RP1 project, it appears that SJ-1, or its parent UTS BioEnergy,
submitted a successful bid and was awarded the San Jose fuel cell system contract. 12
11The parties define “[s]kid or skid-mounted” as “[p]re-fabricated, assembled, and
mounted equipment delivered to the project site as one unit.”
12 Mr. Sharma indicated at trial:
So City of San Jose actually had gone through multiple RFP processes, or
they had issued the RFP a few times before the final RFP was issued
which UTS bid on and succeeded. But prior to that, UTS had had some
conversations with the City of San Jose wastewater treatment plant in
16
Mr. Sharma testified at trial that the agreements involved in constructing the SJ-1 fuel
cell facility were “materially similar” to the agreements involved in constructing the RP1
facility, except for the requirement to operate on 100% biogas. The parties stipulated
that “SJ-1 and San Jose entered into a Power Purchase Agreement, dated October 27,
2010, providing for the sale to San Jose of the electricity generated by the SJ-1 Project,”
and that “SJ-1 and San Jose entered into a Fuel Cell Services Site Lease Agreement,
dated November 11, 2010, providing for SJ-1’s lease of an area on property owned by
San Jose at its WPCP for purposes of locating and operating the SJ-1 Project.”
The power purchase agreement required SJ-1 to provide and install all the
equipment for the project, including the gas conditioning equipment. The power
purchase agreement on the first page stated that “WHEREAS, Customer [San Jose]
desires that Provider [SJ-1] install, maintain, operate and own and Provider desires to
install, maintain, operate and own Systems (as hereinafter defined) to be located on the
Sites . . . .” Later in the power purchase agreement, “Systems” was defined to “mean
each of the fuel cell systems installed pursuant to this Agreement at the Site and more
fully described in Exhibit B hereto; provided, however, that the term Systems shall only
include equipment and materials up to but not including the Interconnection Point of any
such System.” (emphasis in original). 13 Under Exhibit B, “SPECIAL CONSTRUCTION
PROVISIONS,” the term “System” was not further defined, but in “GENERAL DESIGN
CRITERIA,” it was stated: “The Fuel Cell System shall be fed digester gas. The Fuel
Cell System shall include fuel conditioning and cleaning system.” (capitalization and
emphasis in original). Moreover, the power purchase agreement’s Exhibit F, “SCOPE
OF SERVICES,” as in the request for proposals, also stated that the contractor, SJ-1,
would be responsible for all project materials, “including the digester gas clean-up skid,
to condition the methane gas for use.” Mr. Sharma explained that the SJ-1 contract also
specified that the purchaser of the power, San Jose, was to provide the biogas “for free.
And if biogas was not available, then the city was obligated to providing us natural gas
for that period.” As opposed to the RP1 project, which was to operate with some natural
gas always, for the SJ-1 project, Mr. Wason, plaintiffs’ expert, testified that “SJ-1 is not
designed to run on natural gas for any length of time because of the limitation of the
contract between Anaergia and City of San Jose. . . . it’s only for emergencies when you
can run on natural gas for the San Jose plant.”
It appears from the record that SJ-1, like RP1, contracted with many different
entities to build the fuel cell system. The parties stipulated that “SJ-1 and Otto H.
Rosentreter Co. entered into a Design-Build Contract, dated January 17, 2011, with
respect to the design and build of the SJ-1 Project at WPCP. Otto H. Rosentreter Co.
retained Carollo Engineers, Inc. (‘Carollo’), to provide design and engineering services
terms of what essential elements should be present in an RFP for that to
be successful, so even before the RFP was issued, there were some
communications between UTS and City of San Jose.
13Mr. Sharma testified at trial that “systems” in the SJ-1 power purchase agreement
was defined similarly to “facility” in the RP1 power purchase agreement.
17
for the SJ-1 Project under the Design-Build Contract.” From a review of the design-build
contract contained in the record as a joint exhibit, Otto H. Rosentreter was to be
responsible for installation and maintenance services, including unloading and
installation of the “fuel cell module, water treatment, main process, exhaust stack, and
fuel desulfurization skids,” unloading of the “PCU, Transformer, switchgear, heat
exchanger, gas conditioning equipment and 1500 KVA load leveler,” and installation of
the electrical and piping work. Mr. Sharma testified that O.H. Rosentreter was
responsible for integrating the various components, similar in nature to the work
performed by HDR Design-Build for the RP1 project.
The parties stipulated that, as with the RP1 project, “SJ-1 and FuelCell Energy
entered into a Sales Contract for Direct FuelCell (DFC) Power Plants dated October 29,
2010, for SJ-1’s purchase of a 1.4 MW DFC-1500B fuel cell power plant from FuelCell
Energy for the SJ-1 Project.” The sales contract, provided as a joint exhibit, specified
that the fuel cell would be a “carbonate-based fuel cell power plant utilizing Service
Provider's Direct FuelCell® technology.” The parties also stipulated that “SJ-1 and
FuelCell Energy entered into a Service Agreement for Direct FuelCell (DFC) Power
Plants dated October 29, 2010, in connection with the SJ-1 Project.” Plaintiffs’ witness,
Mr. Leo, indicated at trial that the sales and service contracts between the RP1 and
SJ-1 contracts were “essentially the same” and both were based on a “standard form”
sales and service contract template. Regarding the gas conditioning equipment, the
parties stipulated that “SJ-1 and ESC Corp. entered into a UTS Equipment Purchase
Agreement dated February 11, 2011, for the purchase by SJ-1 of a digester gas fuel
conditioning system for the SJ-1 Project.” The “SCOPE OF WORK,” (capitalization and
emphasis in original), in the gas conditioning equipment purchase contract, submitted
as a joint exhibit, stated that the “Supplier [ESC] is responsible for process design and
Original Equipment Manufacturing procurement required for the ESC Digester Gas Fuel
Conditioning System.” Finally, the parties also stipulated that “[t]he heat recovery
system for the SJ-1 Project was supplied by Cain Industries, pursuant to a contract with
the design-builder Otto H. Rosentreter Co.” Although the suppliers for the fuel cell
assembly, gas conditioning equipment, and heat recovery unit were the same between
the RP1 and SJ-1 projects, Mr. Sharma testified at trial that the “suppliers for nuts, bolts,
fittings, pipes, transformers, switchgears might have been different.”
As jointly stipulated to by the parties, “[t]he SJ-1 Project began commercial
operations on June 15, 2012, utilizing natural gas to produce power for delivery to the
San Jose grid and using the heat recovery system to capture excess heat from the fuel
cell.” Mr. Sharma testified at trial that the gas conditioning equipment had to be installed
prior to the “commercial operation date” of the SJ-1 facility. The parties also stipulated
that the project “achieved the required 75% digester gas blend on June 15, 2012.” 14
Another letter from Mr. Fuller, from FuelCell Energy, to Mr. Warfield, of UTS BioEnergy,
contained in the record as a joint exhibit, stated that “the Fuel Cell Power Plant has
14The SJ-1 power purchase agreement stated that the City of San Jose could terminate
the agreement “if expected production of digester gas does not support at least 75% of
the System’s rated capacity of 1.4MW . . . .”
18
operated at the shown power level on greater than 75% anaerobic digester gas.” At trial,
Mr. Sharma testified that SJ-1 operates on almost one hundred percent biogas,
although he admitted that “there might be some blending with natural gas.” The parties
jointly provided exhibits of visuals of the SJ-1 fuel cell project. Shown below is an
overhead view of the project area, with additional explanation of the location of the
various facilities provided by SJ-1:
Additionally provided as a joint exhibit by the parties is an engineering drawing of the
SJ-1 project, with the various components identified by the parties:
19
chain link fence around it.” Mr. Sharma testified that most of the electrical and
mechanical equipment “was supplied by FuelCell Energy.”
Plaintiffs allege that “SJ-1 incurred $9,440,141 in total costs to construct the Fuel
Cell,” although the breakdown of the costs has not been stipulated to by the parties.
Based on a review of the various construction and sales contracts discussed above
related to the SJ-1 project, the court has provided an estimated breakdown of a portion
of the costs associated with the SJ-1 project:
SJ-1 Project Costs
Item Estimated Cost
Construction $1,627,500.00
(from Otto H. Rosentreter)
Fuel Cell Equipment $4,750,000.00
(from FuelCell Energy)
Gas Conditioning Equipment $1,525,000.00 15
(from ESC Corporation)
Heat Recovery Unit $66,581.00
(from Cain Industries)
TOTAL: $7,969,081.00
This breakdown, however, represents only approximately 84.4% of the “total costs”
plaintiffs allege were spent on the SJ-1 project.
Application for Section 1603 Grant
The parties stipulated that “RP1 and SJ-1 each submitted applications to U.S.
Department of the Treasury (‘Treasury’) for payment in lieu of a tax credit under Section
1603 with respect to the costs for constructing the RP1 and SJ-1 Projects at the IEUA
Regional Plant No. 1 and San Jose’s WPCP, respectively.” The parties provided as a
joint exhibit the RP1 final “Application for Section 1603: Payments for Specified
Renewable Energy Property in Lieu of Tax Credits.” (emphasis in original). Under
the final, amended “Narrative Description of Property,” (emphasis in original), the
applicant, RP1, stated: “The Inland Empire Project will purify and compress the
biomethane gas generated by the Inland Empire Utilities Agency Regional Plant 1. The
purified and compressed gas will be fed directly to the fuel cells placed into use at the
Regional Plant 1 Facility to generate electricity and heat for delivery to and purchase by
the Inland Empire Utilities Agency.” The application listed the “Qualified cost basis” of
the project as $16,532,985.00. Plaintiffs state in their complaint that this value is
15 Plaintiffs also state in their complaint that the “direct costs of the gas conditioning
equipment were $1,492,698 and the indirect costs included a pro rata portion
(approximately 23 percent) of the build-design contract costs, sales taxes, and other
costs.”
21
equivalent to the total cost of the RP1 project, $16,616,320.00 “less certain ineligible
costs.” 16 According to the parties, RP1 applied for a grant of 30% of the reported cost
basis, equivalent to $4,959,896.00. The “Property Placed in Service” date for the RP1
project, according to the application, was September 11, 2012. (emphasis in original).
The parties have stipulated that the RP1 Section 1603 application was received by
Treasury on October 17, 2012.
The parties also provided as a joint exhibit, the SJ-1 final “Application for
Section 1603: Payments for Specified Renewable Energy Property in Lieu of Tax
Credits.” (emphasis in original). Under the “Narrative Description of Property,”
(emphasis in original), the applicant, SJ-1, stated: “The San Jose Project will purify the
biomethane gas generated by the San Jose Water Pollution Control Plant. The purified
gas will be fed directly to the fuel cell placed into use as [sic] the San Jose Facility to
generate electricity and heat for delivery to and purchase by the City of San Jose.” The
application listed the “Qualified cost basis” of the project as $9,282,447.00. Plaintiffs
also state in their complaint that this value is equivalent to the total cost of the SJ-1
project, $9,440,141.00, “less certain ineligible costs.” According to the parties, SJ-1
applied for a grant of 30% of the cost basis, equivalent to $2,784,734.00. The “Property
Placed in Service” date for the SJ-1 project, according to the application, was June 15,
2012. (emphasis in original). The parties stipulated that the SJ-1 application was
received by Treasury on September 27, 2012.
Under section four of the RP1 and SJ-1 grant applications, the applicants were
asked to state which “Specified Energy Property” the Section 1603 grant is for, as well
as to “indicate which choice best describes the type of specified energy property.”
(emphasis in original). Both RP1 and SJ-1 stipulated that they “indicated that the ‘best
choice’ describing the” projects was “‘Fuel cell property’ and checked that item on” the
Section 1603 grant applications. The “Fuel cell property” choice on the application was
under the selection of properties available for selection as “Specified properties
eligible under section 48 of Internal Revenue Code.” (emphasis in original). The
description accompanying the “Fuel cell property” option was: “Fuel cell property — fuel
cell power plant that has a nameplate capacity of at least 0.5 kW of electricity using an
electrochemical process and an electricity-only generation efficiency greater than 30%.”
(emphasis in original). A separate set of energy property options was available under a
list of “Specified properties eligible under section 45 of Internal Revenue Code.”
(emphasis in original). Of relevance to this dispute, another option the plaintiffs could
have selected under this list was “Trash facility — uses municipal solid waste to
produce electricity and is not a landfill gas facility.” Plaintiffs allege in their complaint that
“Treasury’s application allows only one choice to be indicated as the ‘best’ choice,” and,
16 A “REPORT OF MANAGEMENT ON ELIGIBLE COST BASIS,” created by UTS
BioEnergy, and provided in the record, states that the ineligible costs for the two
projects consisted primarily of an “Asset Retirement Obligation,” which is “the cost of
returning the site to its original state as is required under the terms of the power
purchase agreement.” (capitalization and emphasis in original).
22
similarly, the parties jointly stipulated “Treasury’s application allows only one choice to
be indicated.”
The parties stipulated that the “overarching” issue before this court is:
whether plaintiff is entitled to additional payments under § 1603 of the
American Recovery and Reinvestment Tax Act (“ARRTA”), P.L. 111-5
(2009), as amended by § 707 of the Tax Relief, Unemployment Insurance
Reauthorization, and Job Creation Act of 2010, P.L. 111-312 (2010),
beyond those awarded to it by the Department of Treasury. Specifically,
plaintiffs applied for § 1603 payments for two projects utilizing fuel cells
that it placed in service. Plaintiffs contend that they are entitled to include
in the cost basis used to calculate their § 1603 payments costs associated
with gas conditioning equipment, while defendant contends that those
costs do not qualify.
The parties stipulated that “Treasury engaged the National Renewable Energy
Laboratory (‘NREL’), a Government-sponsored laboratory, to review applications for
Section 1603 payments. NREL reviewed the applications submitted by RP1 and SJ-1
and made recommendations to Treasury concerning those applications.” Donald
Edward Settle, “senior project leader 4” at the NREL, testified for the defendant and
explained at trial that, although contractually, the Department of Energy is partnering
with the Department of the Treasury related to analysis of Section 1603 grant
applications, “DOE is actually relying on us to provide the advice to Treasury in this
matter.” At trial, Mr. Settle further explained that he was not a member of the
Department of the Treasury or a government employee, but “an employee of the
Alliance for Sustainable Energy, and that’s the contractor that manages the federal lab
which is NREL.” Mr. Settle testified that he has an engineering degree and engineering
work background and that from “2009 to present, I’ve been at NREL and serving mostly
as the senior advisor to the U.S. Department of Treasury on the 1603 program.” Mr.
Settle explained at trial that he initially served “as an advisor to U.S. Treasury, and I
would lead the due diligence aspect of the program. And that was when we first started
receiving applications the end of July in 2009.” He added that “[s]ince then, I’ve been
more a project leader role.”
According to Mr. Settle, regarding the Section 1603 grant program, “NREL
worked with Treasury to set up an online system” and application process, which, at the
date of the trial, had received over 200,000 applications, with about 100,000 reviewed.
Regarding the review process for applications, Mr. Settle testified that, after an
electronic application came in, “we essentially assign two reviewers from our team to
conduct the review.” He described the two reviewers:
There’s a primary reviewer, and their role is really to delve into the
documentation and go back and forth with the applicant, asking clarifying
questions, if that’s appropriate.
23
And then there’s a secondary reviewer which still conducts a
considerable review, but they’re limited to either concurring or not
concurring with the primary reviewer.
Mr. Settle stated at trial that for many projects he had served as a primary or secondary
reviewer, as well as helped “other team members basically with their due diligence
process.” With regards to the RP1 and SJ-1 projects, Mr. Settle explained that he was
not a primary or secondary reviewer, “but I was made aware of the application issues,
by the primary and secondary reviewers, regarding the gas conditioning equipment and
came in at that point to work with them to try to find the right solution.”
Mr. Settle indicated at trial that the evaluators for the Section 1603 program
mostly are employees of the Alliance for Sustainable Energy, the organization that
manages NREL, with some temporary contractors. Mr. Settle explained that the Section
1603 evaluation team’s skill levels were composed of a variety of different areas, both
technical and non-technical:
So the -- the team actually we’ve probably had almost fifty people come
through the program to serve as reviewer. Some of them brought different
skills to the table, so we actually had a mix of people. Most people had
advanced degrees from college. Some of them were from the legal side,
law degrees. There were some engineers. There were people that had so-
called tax experience, if you will.
Regarding tax experience, Mr. Settle stated at trial that “people who were brought into
the program to do the due diligence were not retained specifically because they had tax
experience.” He added, however, that “[w]e do have certain employees within NREL
who understand fairly well incentive programs that help with the deployment of
renewable energy, so that does include taxes as they relate to renewable energy
property.” Mr. Settle testified that he would not describe any of the NREL employees to
be tax experts, although Mr. Settle testified that for multiple applications, the NREL
team, acting through the Department of the Treasury, consulted with the IRS for legal
analysis related to certain Section 1603 applications. Mr. Settle stated at trial that, when
doing reviews, a reviewer’s analysis covered a “unique mix of understanding some of
the technical aspects, understanding, you know, the tax laws or regulations . . . .” Mr.
Settle indicated that, to arrive at their determinations, their team would look at
engineering drawings, the project “engineering, procurement, and construction
contract,” as well as other contracts and documents.
The NREL evaluators examined whether the gas conditioning equipment fell
within Section 1603’s definition of a “QUALIFIED FUEL CELL PROPERTY,” in order to
be eligible for a grant. See Section 1603(d)(2). With regards to the gas conditioning
equipment, Mr. Settle testified:
[W]e also looked at the definition of “fuel cell power plant.” And we had
worked through a fair number of fuel cell power plants within the system
24
and had not seen one that had this type of property with it, so in looking at
the statutory definition, what we understood was that a fuel cell power
plant was essentially within a certain definition and would not have
included the gas conditioning equipment.
Despite the unique legal and technical questions posed by the RP1 and SJ-1 grant
applications, in particular surrounding the gas conditioning equipment, Mr. Settle stated
at trial that he could not recall if the IRS, or Treasury’s Tax Policy section, was ever
contacted with regards to the RP1 and SJ-1 applications. He also testified that he never
himself contacted the IRS to clarify the tax issues related to the RP1 and SJ-1
applications. Mr. Settle also was asked at trial if NREL reached out to other technology
laboratories regarding the issues raised. Mr. Settle testified that he did not reach out to
the National Energy Technology Laboratory, which is another Department of Energy
laboratory 17 or the Department of Energy about questions related to the RP1 or SJ-1
applications, generally, or regarding whether fuel cell power plants include gas
conditioning equipment as part of the eligible cost basis. Mr. Settle stated that “I also
don't know if in fact other players on my team did not go and visit with the fuel cell
experts within NREL . . . .” When asked, Mr. Settle acknowledged that he did not look at
any industry standards with respect to fuel cells to answer the questions posted in the
RP1 and SJ-1 applications, but “did look at various fuel cell providers and what they do
provide as part of their customary fuel cell package.”
Mr. Settle indicated at trial that, as opposed to reaching out to other agencies or
outside resources, instead, NREL relied, in significant part, on what was customary in
fuel cell projects their review team had encountered beforehand, to determine whether
or not the RP1 and SJ-1 project gas conditioning equipment was eligible for a Section
1603 grant. Mr. Settle testified that of “250 to 300” funded fuel cell power plant grant
applications, “less than half a dozen” of the projects contained gas conditioning systems
for operation on biogas, because, for the remaining projects, “[t]hey’re mostly natural
gas and some methanol in the transportation.” Mr. Settle added, in response to
questions:
Q. But you based that determination [that gas conditioning equipment was
not part of the fuel cell power plant] on looking to outside sources of
information to determine what was customary or not to define effectively
the fuel cell power plant under the code; isn't that right?
A. By “outside sources” do you mean those not provided by the applicant?
Because we did look --
17 The website of the National Energy Technology Laboratory explains that “NETL
[National Energy Technology Laboratory] has expertise in coal, natural gas, and oil
technologies; contract and project management; analysis of energy systems; and
international energy issues.” About, Nat’l Energy Tech. Lab., Dept. of Energy,
http://www.netl.doe.gov/about (last visited March 31, 2015).
25
Q. Independent of the statute.
A. So independent of the statute, we did -- yeah. We looked at what it
seems to be customary for the industry.
Mr. Settle expanded upon his response and stated that, for example, it was “customary”
for fuel cells to run on natural gas, and, therefore, a natural gas desulfurization system
would be allowable for a Section 1603 grant, as it is “a set of equipment that you can
expect to find when you purchase a package fuel cell power plant.” Mr. Settle explained
that the interconnection equipment, pads, and wiring were similarly allowed because
they were typical of fuel cell projects. Mr. Settle also created an analogy to cars in
discussing what is “customary” for a project:
You know, if I was going to go buy a pickup truck from a dealer across the
country, what would be customary would be to get a pickup truck that runs
on gasoline. I could get it to run on natural gas, but it would be an
extraordinary expense to get it to run on the natural gas, so the customary
approach in that perspective is a truck that runs on gasoline.
Mr. Settle acknowledged that the plaintiffs claimed that the gas conditioning
system was necessary for the RP1 and SJ-1 fuel cell projects to operate off of
anaerobic digester biogas, and admitted that this “was a good point,” but, regardless,
“the way we read the tax code, we didn’t see that it was a definitive point. It was not
relevant, frankly, to basis.” According to Mr. Settle, NREL considered what consisted of
a fuel cell power plant as “what was customarily supplied by a fuel cell manufacturer,”
and found significant that “a separate vendor was providing gas conditioning
equipment.” Mr. Settle further testified that “[w]e obviously had the experience of all the
other applications that we had seen, and we were not familiar with, to my knowledge,
that there was no other projects that included special gas conditioning equipment for
cleaning up biogas, digester gas” in the Section 1603 grant application. Mr. Settle,
nonetheless, also stated that “I think ultimately we came down to the tax code in trying
to figure out what was actually meant by the term ‘fuel cell power plant’ in the tax code,”
and indicated that reliance on what was “customary” in the industry was only a part of
the overall analysis.
According to Mr. Settle at trial, he viewed the RP1 and SJ-1 contracts and
concluded that they do not require the use of anaerobic digester biogas: “As I
understand it, they had a contractual obligation to use either natural gas or biogas. But
the principal purpose was probably the use of biogas.” Mr. Settle later noted that
“natural gas can be used, and I think there’s a specified limit of 25 percent, if I recall
correctly.” He also added:
And in particular in this case, the applicant [RP1] placed the equipment in
service two months prior I believe to the gas conditioning equipment even
being operational, and so therefore, you’d have to ask the question how
integral is it if in fact they started up the power plant, under the tax
26
definition of placed in service, without the biogas conditioning equipment
actually in operation.
He continued:
So from our perspective, you know, just as one point would be how
can you start up a facility and place it in service without something that is
integral to its operation being there in place.
If you went to look at a biomass plant, for example, and you didn’t
have your conveyors and fuel yard, and so forth, available, you wouldn’t
be able to start up that biomass plant.
Mr. Settle also stated that, under the NREL review, contracts are relevant to the
analysis, but “not the sole aspect.”
Although Mr. Settle stated that some, “less than half a dozen,” of the projects he
had reviewed contained gas conditioning systems for operation on biogas, he initially
testified that he was unaware of any application that chose, then, to include the gas
conditioning equipment as part of the cost basis for the Section 1603 grant, except for
RP1 and SJ-1. Mr. Settle later stepped back from those statements and admitted he did
not know:
Q. Do you know, based on that testimony, whether Treasury or NREL
allowed costs for gas conditioning equipment --
A. I don’t.
Q. -- in particular applications?
A. I don’t.
Q. Okay. Or disallowed.
A. Outside of these two, I’m not aware of any that were disallowed --
Q. Okay.
Mr. Settle testified that NREL did not initially consider whether or not RP1 or SJ-1
could qualify as trash facilities, because they did not designate this option on their
online applications. Mr. Settle later stated that, although he did not remember when, “at
some point we did evaluate” whether RP1 or SJ-1 could qualify as trash facilities. Mr.
Settle stated that
We’d concluded that it was not qualified as a trash facility. It was not
consuming, from our perspective, municipal solid waste. It was actually
27
taking digester gas into the plant. And we looked basically back to the
definition of a trash facility as outlined in [I.R.C.] section 45 and did not
find that it was compatible.
Mr. Settle further testified:
I think there was a letter from them at some point that basically said, you
know, we’re taking in municipal liquid waste, but we didn’t find that they
were actually taking in waste at all. They were taking digester gas.
And we didn’t -- we analyzed the wastewater treatment plant, and
the wastewater treatment plant was not subject to the municipal solid
waste regulations, and based on our review did not feel that this was a
trash facility as defined in the code.
In determining that the RP1 and SJ-1 projects were not using municipal solid waste, Mr.
Settle testified, speaking about the evaluation team, “we just felt, based on what the
actual facility[ies, referring to the RP1 and SJ-1 plants, are] being regulated as, not
being regulated as a municipal solid waste treatment facility, therefore, it’s not a trash
facility.” Mr. Settle testified he never formally communicated with the Environmental
Protection Agency, the agency that oversees regulation of solid waste, 42 U.S.C § 6901
et seq., about this question, but that he had a conversation with an unidentified person
from the Environmental Protection Agency Region 8, and that “the conclusion out of that
was that this was not a trash facility.”
In cross-examination, Mr. Settle reemphasized that the distinguishing factor as to
whether or not plaintiffs’ facilities qualified as trash facilities was due to NREL’s
conclusion that the anaerobic digesters feeding the RP1 and SJ-1 projects were not
running off of municipal solid waste. Mr. Settle responded to a hypothetical question
proposed by plaintiffs’ counsel:
Q. . . . If we had an anaerobic digester that digested municipal solid
waste, let’s say, and let’s just say that’s -- we have food waste from
maybe local restaurants, and you put that into an anaerobic digester. And
that is not a wastewater treatment facility. And then you produce biogas
from that; right?
A. Yes.
Q. And then you run that biogas through gas conditioning
equipment and then put it in – let’s just say it’s a combustion generator --
A. Sure.
Q. -- to make contract electricity. Would you call that a trash
facility?
28
A. Yes. It sounds like a trash facility.
...
Q. Okay. The same facts, but instead of a combustion generator,
we have a fuel cell and we put a fuel cell in that same train. Would you say
that’s a trash facility?
A. Yes.
...
Q. So the real dispute is whether -- is the difference between a
wastewater treatment facility and what would be otherwise an anaerobic
digester gas -- anaerobic digester that’s operating on what you’re terming
municipal solid waste.
A. Yes. That’s how we looked at it, is essentially that, you know, the
municipal wastewater treatment plant was not processing solid waste, the
fuel cell itself was not using municipal solid waste, and therefore, it did not
qualify as a trash facility.
The record indicates that during the application review period, the agency also
excluded from the cost basis for the RP1 and SJ-1 grants the cost of the heat recovery
units supplied by Cain Industries. Mr. Settle explained that he and the NREL examiners:
[W]e looked at the definition of a fuel cell plant power plant [sic] in the
statute or in the tax code, if you will, and the definition of “fuel cell power
plant” referred to the production of electricity, did not refer to the
production of thermal energy, and so we deemed the -- that the thermal
equipment to be noneligible, nonqualifying.
Mr. Settle stated that there “was some back-and-forth on that” with the parties, “but at
some point they agreed to remove the hot water or the thermal aspects of the project,”
although he admitted he could not recall the details. 18
Mr. Settle further testified that, after the review by NREL, the application “goes
18At trial, plaintiffs disputed that the plaintiffs had agreed that the heat recovery unit was
an ineligible cost. Plaintiffs’ counsel stated: “The agreement was to remove it as part of
a concession to Treasury in order to move the process forward and resolve it
administratively.” In the record, and discussed more below, is a letter from UTS
BioEnergy to a “Treasury 1603 Reviewer,” which states: “Therefore, we now understand
that the HW [Hot Water] pump system costs and HRU [Heat Recovery Unit] costs are
ineligible costs.”
29
electronically to the U.S. Department of Treasury with a recommendation. And all
decisions rest with Treasury in terms of eligibility and cost basis, and so forth, so if they
agree with our recommendation, then they’ll move forward with the award and funding.”
Mr. Settle emphasized that the Department of the Treasury makes the final Section
1603 determinations: “Ultimately it’s Treasury’s decision how to look at the application
and make the decisions,” and that NREL relies “on Treasury where there’s an issue of
legality.” Mr. Settle indicated that his contact at Treasury was Ellen Neubauer. Mr. Settle
further testified at trial that he believed the “fiscal assistant secretary” is responsible for
the Section 1603 program. Mr. Settle testified that he would not necessarily be aware of
any deliberations at Treasury regarding legal questions related to the RP1 and SJ-1
applications. No witnesses from Treasury testified at trial to describe the final steps of
the evaluation process before the final award decision was made.
The record indicates that staff from Treasury and/or NREL communicated back
and forth with plaintiffs during the selection process. Although the record does not
appear to contain a complete collection of the conversations at the administrative level
between the government and plaintiffs, it does contain what appears to be a portion of a
November 12, 2012 response from a David Allen, on UTS BioEnergy letterhead, to an
unnamed “Treasury 1603 Reviewer,” regarding questions asked by the government
about plaintiffs’ Section 1603 applications. This response letter provides additional,
general information about the RP1 project, and also addresses a question posed by the
government, which asked:
Question: 5. Ineligible costs: All costs associated with the gas conditioning
equipment/installation and heat capturing equipment/installation are
ineligible for a fuel cell project under Treasury 1603. Please remove all
ineligible costs and provide a revised cost basis.
(emphasis in original). Mr. Allen responded:
Answer: The biogas conditioning equipment, the heat recovery unit and
the HW pump system are all tangible personal property and integral to the
fuel cell installation. The fuel supply for the fuel cell project is digester
biogas from a wastewater treatment plant and it is therefore a renewable
energy source. Digester gas must be treated, cleaned and scrubbed to
meet the fuel supply specifications. This would be true of any renewable
biogas utilized for the production of electrical power. The gas treatment
and conditioning system (ESC contract) is therefore integral to the fuel cell
and the project does not work without it.
In order to produce the digester biogas, heat is required in the process.
The heat recovery/recapture system including the heat exchanger, hot
water pumps, valves and piping are integral to the fuel cell system to
recover otherwise wasted renewable energy utilized in the production of
the renewable biogas fuel source for the fuel cell.
30
We do not believe any of these costs to be ineligible as the equipment is
integral to the fuel cell operation. Accordingly we have not provided a
revised eligible cost basis.
A similar exchange occurred between SJ-1 and a “Treasury 1603 Reviewer,” in
the form of a December 21, 2012 response to questions from the government,
contained in the record. The government reviewer asked:
Question 5A. Ineligible Costs: The Program Guidance indicates that
eligible property is only tangible personal property as defined in 1.48-1(c)
and (d) of the Income Tax Regulations and is an integral part of the
facility. It appears that the cost breakdown includes costs that are not
eligible for payment under the Treasury 1603 program, including all hard
and soft costs associated with the biogas conditioning equipment (ESC
contract), HRU [heat recovery unit], and HW [hot water] pump systems.
The review team has reaffirmed that these costs are not integral to the
energy property and are therefore not eligible for Treasury 1603 funding.
Please submit a revised cost basis in spreadsheet format which excludes
these ineligible costs and clearly identifies how all the ineligible costs were
removed.
Mr. Allen, again using UTS BioEnergy letterhead, gave a detailed, five page response,
emphasizing that the gas conditioning equipment is “Contractually Required,”
“Integrated and Contiguous,” and “Integral” to the project, as well as that the equipment
falls within the definition of “Balance of Plant.” (emphasis in original). He argued that the
biogas conditioning equipment was contractually required because the “City of San
Jose Request for Proposal, RFP 09-10-15, Power Purchase & Site Lease Agreement
for Fuel Cell Power Production (‘RFP’) . . . state[d] the essential requirements of the
Project including the use of digester gas.” (footnote omitted). Further, based on a
physical description of the project site, he contended that “the biogas conditioning
equipment is tangible personal property squarely located at the site of the energy
property that is contiguous and integrated to the fuel cell system.” Moreover, Mr. Allen
argued the gas conditioning equipment is integral because “[t]he unconditioned digester
biogas that is available on the WPCP [Water Pollution Control Plant] site does not meet
the fuel cell manufacturer’s fuel specification so it cannot be used in the Project without
conditioning it first. In other words, the fuel cell cannot operate using unconditioned
biogas.” Thus, according to Mr. Allen, “without biogas conditioning equipment, this
Project cannot generate electricity from the digester biogas,” and, thus, the equipment is
“integral and essential to the generation of electricity from digester biogas by this
Project.” Mr. Allen also stated, “technically, operationally and contractually the biogas
conditioning equipment is an integral balance of plant component of the Project.”
Mr. Allen further analogized the role of the gas conditioning equipment in a fuel
cell system to that in a landfill gas facility, stating:
In a landfill gas facility (generating electricity from biogas produced by the
31
biodegradation of municipal solid waste) biogas conditioning equipment is
considered an integral part of the facility and an eligible cost under the
1603 program.
...
Here, the Project’s gas conditioning equipment performs the same integral
process as it would in a landfill gas facility. The biogas produced by the
biodegradation of biosolids in the wastewater treatment process is
captured to generate electricity at the WPCP. This captured digester
biogas must be processed by the gas conditioning equipment to remove
the high level of siloxanes, hydrogen sulfide and other contaminants
contained in it before it can be used in the fuel cell.
(emphasis in original). Mr. Allen added that “[w]hile the biogas conditioning equipment
could condition digester biogas without the fuel cell equipment, the fuel cell equipment
could not generate electricity from the digester biogas without the biogas conditioning
equipment.” (emphasis in original). He stated:
While Treasury may have encountered other fuel cell projects where
biogas conditioning equipment was not necessary to generate electricity
because those fuel cells run on pipeline natural gas (which by pipeline
standards must meet the fuel cell manufacturer's fuel quality
specifications), here we believe that we have clearly demonstrated that for
this Project the biogas conditioning equipment is a balance of plant
component that is contiguous, essential, necessary and integral to the
ability of this Project to generate electricity using digester biogas derived
from municipal liquid waste at a wastewater treatment plant.
(emphasis in original). In the letter, however, Mr. Allen suggested that the costs related
to the heat recovery system were ineligible: “The fuel cell equipment will generate
electricity without the HW [hot water] pump system or the HRU [heat recovery unit], just
less efficiently. Therefore, we now understand that the HW pump system costs and
HRU costs are ineligible costs.”
According to the parties, “[o]n January 14, 2013, Treasury issued a ‘Section 1603
Award Letter’ to RP1 in which it approved a payment of $4,026,253 for the RP1
Project,” which was $933,603.00 less than requested by RP1 in their grant application.
The parties stipulated that “Treasury based its payment on a reduced basis amount of
$13,420,843.” In the award letter, submitted as a joint exhibit, Treasury stated: “We
have reduced the payment to match the adjusted cost basis by removing costs
associated with the gas conditioning equipment and hot water system, which are
ineligible,” but the award letter provided no additional discussion on the issue.
After receipt of the award letter, the record indicates that on January 17, 2013,
Mr. Allen, this time using an Anaergia e-mail account, sent an e-mail to the “1603
32
Awards” mailbox, asking:
While [sic] are pleased to receive the 1603 award we are disappointed
that the gas conditioning equipment that makes it a truly renewable energy
project has been disallowed as an eligible expenditure.
Can we get an explanation of why the gas conditioning equipment is not
considered integral to the project?
Also, is it possible to get a break down of how the final award was arrived
at?
A couple of months later, on March 29, 2013, a response was provided from the
“1603Awards@treasury.gov” e-mail address to Mr. Allen, stating in relevant part:
The term “fuel cell power plant” means an integrated system comprised of
a fuel cell stack assembly and associated balance of plant components
which converts a fuel into electricity using electrochemical means. This
does not allow for the production or refining of the fuel source used to feed
the fuel cell. Therefore the costs associated with conditioning the gas and
collecting the waste heat are not eligible and were removed from the cost
basis.
Cost Basis:
Equipment
Fuel Cell $8,858,000.00
Hot Water System $0
Gas Treatment $0
BD [Build & Design] Contract $2,272,417.81 (79% of total contract, based
on 79% of the equipment costs were eligible)
Sales Tax
Fuel Cell $670,995.00
Heat Exchanger $0
Gas Conditioning $0
Other Costs $1,619,430.37
Total Costs $13,420,843 (revised cost basis) (equipment + Eligible portion
of BD contract + eligible sales tax + other costs) New Payment $4,026,253
(revised award amount).
The parties have jointly stipulated that “RP1 is not challenging the costs associated with
the heat recovery system described in Treasury’s Section 1603 Award Letter.”
Regarding the SJ-1 project, the parties further stipulated that, “[o]n March 1,
2013, Treasury issued a ‘Section 1603 Award Letter’ to SJ-1 in which it approved a
33
payment of $2,085,055 for the SJ-1 Project,” $699,679.00 less than the amount that
SJ-1 applied for under the program. According to the parties, Treasury “based its
payment on a reduced basis amount of $6,950,182.” The award letter from Treasury,
provided as a joint exhibit, states similarly as with the RP1 letter that, “[w]e have
reduced the payment to match the adjusted cost basis by removing costs associated
with the gas conditioning equipment, which are ineligible.” The SJ-1 project
preemptively acted, prior to award, to remove from its application the costs related to
the heat recovery system. The parties stipulated that “[d]uring Treasury’s review
process, SJ-1 voluntarily removed $216,320 representing the costs associated with a
heat recovery system and certain other costs reducing its reported cost basis to
$9,066,127. SJ-1, therefore, is not challenging those costs in this proceeding.”
The plaintiffs RP1 and SJ-1 together approached Treasury about the removal of
the cost of the gas conditioning equipment from their awards. The record contains, as a
joint exhibit, a May 23, 2013 letter from David Lowman of Hunton & Williams, the law
firm representing plaintiffs in the above captioned case, to Ellen Neubauer, who the
parties stipulated is “the program manager for the Section 1603 program.” The letter
stated that “I [Mr. Lowman] would appreciate the opportunity to discuss with you the
above applications in which Treasury reduced the grants for two fuel cell projects on the
ground that the associated gas conditioning equipment does not qualify.” The letter
provided arguments as to why the gas conditioning equipment should have been
included in the grant. In the letter, Mr. Lowman restated that, “the Section 1603
guidance defines a qualifying ‘fuel cell power plant’ as ‘an integrated system
compromised of a fuel stack assembly and associated balance of plant components.’”
Mr. Lowman also stated: “It is indisputable that, one, the gas conditioning equipment
and the fuel cells are part of an ‘integrated system,’ and, two, the gas conditioning
equipment represents ‘associated balance of plant components.’” (quoting Section
1603). In support, Mr. Lowman pointed to a number of alleged factors indicating the
importance of the gas conditioning equipment to the overall project, including that the
biogas, if not conditioned, would damage the fuel cells, as well as that “[u]nder the
contracts with the site hosts, UTS must supply the gas conditioning equipment itself,”
and “[t]he fuel cells and the gas conditioning equipment were placed in service at the
same time, and operate together.” Plaintiffs also formally raised the argument that the
gas conditioning equipment and fuel cells also could be awarded the full desired Section
1603 grant if they were instead classified as trash facilities. Mr. Lowman stated in the
letter that “these projects, in fact, satisfy the definition of a qualified ‘trash facility’ and
could have filed their applications as that type of facility.” The letter stated in addition:
The biogas at these projects is produced from anaerobic digesters that
digest and gasify the sludge from the wastewater treatment plants. That
wastewater treatment sludge is solid waste per the Solid Waste Disposal
Act and, therefore, is municipal waste for purposes of Section 45 and the
1603 Grant. Because the biogas is produced from municipal waste and
the fuel cells convert that biogas to electricity, the plants are “trash
facilities” as that term is defined in the Treasury Guidance.
34
Mr. Lowman concluded by raising policy arguments in support of covering gas
conditioning equipment under the Section 1603 grant program, stating:
It should be noted that the fuel cell projects here are exactly the kind of
renewable energy projects that Congress sought to encourage when it
enacted Section 1603. Indeed, DOE’s Office of Energy Efficiency &
Renewable Energy (EERE), working through DOE's Fuel Cell Technology
Program in coordination with DOE's Biomass Program and NREL, have
made the use of fuel cells at waste water treatment plants and landfills a
priority. These sources create over 30% of U.S. methane emissions and
represent an enormous source of potential energy.
According to the parties, “[o]n June 1, 2013, Ms. Neubauer responded by email”
to the e-mail from Mr. Lowman. Ms. Neubauer initially stated in her response that “I
have consulted with my IRS colleagues and am informed that the IRS has not had
occasion to rule on the issues presented by these applications.” She responded first to
Mr. Lowman’s claim that the gas conditioning equipment should be included under the
“fuel cell property” designation as part of an “integrated system” with the fuel cell
assembly:
Based on the plain and straightforward definition of a fuel cell property, as
defined in the Section 1603 Program Guidance, we do not believe such
property to include gas conditioning equipment. The definition of fuel cell
property refers to specific equipment that converts a fuel into electricity
using electrochemical means. The definition does not include equipment
associated with producing/conditioning/delivering the fuel. Whether or not
a property qualifies as a fuel cell property is not dependent on the type of
fuel used. In sharp contrast, whether or not a facility qualifies as an open-
loop biomass facility, closed-loop biomass facility, or trash facility is
completely dependent on the resource from which the electricity is
generated. Thus certain equipment necessary in using that resource to
produce electricity can be considered part of the facility. That the
properties at issue are co-located at a wastewater treatment plant, are
contractually obligated to use biogas that is produced from the wastewater
treatment plant, and are designed such that the biogas must be treated
before it can be used in the fuel cell property, does not change our view.
While a fuel cell property is an integrated system, one need not look to
what may or may not constitute an “integrated unit” in other contexts
because the definition of fuel cell property precisely delineates what that
integrated system is comprised of - a fuel cell stack assembly and
associated balance of plant components. We are aware of no authority
that would define “balance of plant components” for a fuel cell property to
encompass gas conditioning equipment. The definition of fuel cell property
includes the balance of system equipment to convert a fuel into electricity,
not to extract or manufacture the fuel, clean it, deliver it, etc.
35
Ms. Neubauer dismissed Mr. Lowman’s argument that the RP1 and SJ-1 fuel cell
systems could alternatively qualify as a “trash facility,” stating: “Whether or not the
facilities would qualify as trash facilities is not relevant as the applicant did not apply for
a trash facility. Ms. Neubauer stated that: “[i]n light of the above, the determinations on
these applications are final.”
On August 6, 2013, plaintiffs filed suit in the United States Court of Federal
Claims, seeking “payment of the cash grant amounts mandated by section 1603 of the
American Recovery and Reinvestment Tax Act of 2009.” Plaintiffs claim that the
Department of the “Treasury was required to make payment of the applied-for amounts
to RP1 and SJ-1 because the associated gas conditioning equipment is ‘specified
energy property’ under Section 1603,” and that “Treasury’s notifications to RP1 and
SJ-1 do not provide the reasons for Treasury’s determination to remove the costs
associated with the gas conditioning equipment.”
In this court, plaintiffs bring two separate arguments. First, plaintiffs claim that the
gas conditioning equipment is part of the “associated balance of plant components”
related to the grant available to “QUALIFIED FUEL CELL PROPERTY” under Section
1603. (capitalization in original). Plaintiffs explain:
Section 1603(d)(2) defines the term “specified energy property” to include
any “qualified fuel cell property” which is further defined, by reference, in
section 48(c)(1) of the Internal Revenue Code of 1986, as amended (the
“Code” or “I.R.C.”). . . . Section 48(c)(1) of the Code defines “qualified fuel
cell property” as a “fuel cell power plant” that is defined as follows:
an integrated system comprised of a fuel cell stack assembly
and associated balance of plant components which converts
a fuel into electricity using electrochemical means.
Plaintiffs contend that the RP1 and SJ-1 fuel cells systems are contractually obligated to
use the biogas from the waste treatment sites for environmental and economic
purposes, and, therefore, these facilities require gas conditioning equipment. Plaintiffs
further contend that the fuel cell assemblies and gas conditioning equipment were
placed into service at the same time and at the same place, and are completely under
the control of RP1 and SJ-1, not the IEUA or San Jose respectively. Plaintiffs conclude
by stating:
The definition of “fuel cell power plant” is broadly worded to include the
“integrated system” that is comprised of the fuel stack assembly and the
“associated balance of plant components.” In the case of fuel cell property,
the “balance of plant” includes all supporting and/or auxiliary components
based on the power source or site-specific requirements which are
integrated into a comprehensive power system package. The “balance of
36
plant” for a fuel cell power plant includes the associated gas cleaning,
processing, and conditioning equipment.
Plaintiffs in their alternative claim argue that the gas conditioning equipment,
either individually or as part of the RP1 and SJ-1 fuel cell systems, also qualifies for a
Section 1603 grant as “trash facilit[ies].” Plaintiffs state “Treasury’s application allows
only one choice to be indicated as the ‘best’ choice. Accordingly, RP1 checked the box
for fuel cell property even though the Fuel Cell property could also be described as a
trash facility.” According to plaintiffs, “Treasury’s application contemplates that property
may qualify under multiple categories of ‘specified energy property.’ The applicant’s
selecting the ‘choice’ that ‘best describes’ its property does not foreclose any other
‘choice.’”
According to the parties’ joint stipulation of facts, “Defendant does not contend
that plaintiffs may not assert their alternative ‘trash facility’ argument on the procedural
ground that RP1’s and SJ-1’s applications checked the box for ‘Fuel cell property’ and
not the box for ‘Trash facility,’” and the government has not sought to bar plaintiffs’
alternative grounds in this court. Plaintiffs argue:
Section 1603(d)(1) defines the term “specified energy property” to include
“any qualified property” (defined, by reference, in section 48(a)(5)(D) of
the Code) which is part of a “trash facility” described in section 45(d)(7). A
“trash facility” is a facility which uses municipal solid waste to produce
electricity. Under section 45(c)(6) of the Code, the term “municipal solid
waste” has the meaning given the term “solid waste” under section 2(27)
of the Solid Waste Disposal Act, 42 U.S.C. 6903, which specifically
includes “sludge from a waste treatment plant.”
Plaintiffs offer in support that “[t]he biogas utilized in both Fuel Cells is produced through
an anaerobic digestion process,” and that “[t]he anaerobic digestion process at both the
IEUA and San Jose sites involves the anaerobic digestion of the ‘sludge’ – i.e., the solid
portions – from the wastewater treated at the two plants.”
Plaintiffs seek $880,237.00 in additional Section 1603 grant money related to the
gas conditioning equipment for the RP1 project, because according to plaintiffs “RP1 is
entitled to a total grant of $4,910,086, which includes the costs relating to the
associated gas conditioning equipment,” and which is more than the grant of
$4,026,253.00 that RP1 did receive. 19 With respect to the SJ-1 plant, plaintiffs seek
19 In the parties’ joint stipulations of fact, plaintiffs claim only $880,237.00 as owed to
them by the government for the RP1 gas conditioning equipment, $3,596.00 less than
what was alleged in the complaint, $883,833.00. In their final brief to the court, plaintiffs
asked for a total award of $1,515,020.00, also reduced regarding the RP1 requested
amount by $3,596.00 from the amount listed in plaintiffs’ complaint. This difference of
$3,596.00 has not been fully explained by the parties, but may be due to a revision by
the parties of the costs of the Heat Recovery Units, which are part of the overall RP1
37
$634,783.00 in additional Section 1603 grant money related to the gas conditioning
equipment for the SJ-1 project, because “SJ-1 is entitled to a total grant of $2,719,838,
which includes the costs relating to the associated gas conditioning equipment,” and
which is more than the grant of $2,085,055.00 that SJ-1 did receive. This appears to
result in a total, cumulative request for $1,515,020.00. Plaintiffs also seek to “[v]acate
Treasury’s final determinations regarding the RP1 and SJ-1 applications under Section
1603,” as well as any other relief the court deems proper.
DISCUSSION
According to plaintiffs, “[t]his Court has jurisdiction over the subject matter of this
action pursuant to the Tucker Act, 28 U.S.C. § 1491 because Section 1603 is a money-
mandating source of law that requires the payment of the costs applied for by RP1 and
SJ-1,” citing ARRA Energy Co. I v. United States, 97 Fed. Cl. 12 (2011). Defendant
does not contest jurisdiction. Section 1603(a) of the American Recovery and
Reinvestment Act states:
(a) IN GENERAL.—Upon application, the Secretary of the Treasury shall,
subject to the requirements of this section, provide a grant to each person
who places in service specified energy property to reimburse such person
for a portion of the expense of such property as provided in subsection (b).
Section 1603(a) (capitalization in original). A judge of this court has held that the
language of Section 1603(a) “compels the government to provide a grant to any person
who places specified energy property into service, subject only to the express
requirements set forth in the statute.” ARRA Energy Co. I v. United States, 97 Fed. Cl.
at 20–22; see also Clean Fuel LLC v. United States, 110 Fed. Cl. 415, 419 (2013)
(agreeing with the court in ARRA Energy Co. I that Section 1603 is money-mandating
insofar as the suit is for “‘a grant . . . to reimburse’ the cost of certain ‘energy property.’”
(quoting Section 1603(a)) (modification in original)); LCM Energy Solutions v. United
States, 107 Fed. Cl. 770, 774 (2012) (affirming ARRA Energy Co. I). The United States
Court of Appeals for the Federal Circuit has “‘repeatedly recognized that the use of the
word “shall” generally makes a statute money-mandating.’” Greenlee Cnty., Ariz. v.
United States, 487 F.3d 871, 877 (Fed. Cir.) (quoting Agwiak v. United States, 347 F.3d
1375, 1380 (Fed. Cir. 2003)), reh’g and reh’g en banc denied (Fed. Cir. 2007), cert.
denied, 552 U.S. 1142 (2008); DeKalb Cnty., Ga. v. United States, 108 Fed. Cl. 681,
695 (2013); Lummi Tribe of Lummi Reservation v. United States, 99 Fed. Cl. 584, 594
(2011).
Plaintiffs presented three witnesses at trial, introduced above, Arun Sharma,
President of Anaergia North America, Anthony Leo, Vice President of Applications and
Advanced Technologies for FuelCell Energy, and Sarwan Wason, Senior Vice President
and SJ-1 projects. The parties have stipulated that the parties are not seeking recovery
related to the cost basis of the Heat Recovery Units used in the RP1 and SJ-1 projects.
38
of Carollo Engineers. 20 Defendant presented two witnesses at trial, Donald Edward
Settle, Senior Project Leader 4 at NREL, and defendant’s expert, Trent Markell,
professional mechanical engineer and founder and Principal of PF Engineer, LLC,
which he indicated provides engineering consulting for energy projects. Sarwan Wason,
plaintiffs’ expert, was admitted as an expert witness in the “[d]esign and engineering of
fuel cell power plants using anaerobic digester gas as a fuel source.” Defendant’s
expert, Trent Markell was admitted as “an independent engineering expert in the energy
industry.” 21
20 Mr. Wason stated at trial that he was a “senior vice president of Carollo Engineers,”
and that Carollo Engineers “specialize[s] in designing water and wastewater plants.” He
testified that he has been with Carollo Engineers for forty two years. Mr. Wason stated
in his report that “I am a registered mechanical engineer with over 40 years of
experience in design of cogeneration (combined heat and power or CHP [Combined
Heat and Power]) plants using digester gas as fuel including fuel cells, gas turbines,
internal combustion engines and micro turbines power generation technologies.” He
added: “I have been involved in the design of over 20 digester gas cogeneration
projects during the last 40 years,” “was project manager for the San Jose fuel cell power
plant project,” and was involved in multiple other fuel cell projects in the California area.
Mr. Wason testified that his specialization “is designing cogeneration plants and pump
stations and large mechanical, complicated mechanical systems in wastewater plants
and water plants.” He was admitted as an expert witness in the “[d]esign and
engineering of fuel cell power plants using anaerobic digester gas as a fuel source.”
Both Mr. Sharma, from Anaergia, and Mr. Leo, from FuelCell Energy, testified that Mr.
Wason was involved in the development of the SJ-1 project, through his work with
Carollo Engineers.
21 In his expert report, Mr. Markell stated that “I am the founder and Principal of PF
Engineer, LLC, which provides independent engineering consulting for energy projects.
I have over 22 years of engineering experience with approximately 20 years working
with energy projects,” including energy facilities “with a combined capacity in excess of
37,000 Megawatts, (‘MW’) and biofuels projects with a combined production capacity in
excess of 2 billion gallons per year.” Mr. Markell indicated at trial that his primary
background is in design turbines and engines, but that this has been supplemented
through work as an independent engineer, in which “you look at the projects from a
much higher level, so you have a better understanding of the technical aspects of the
project as well as the economic and legal.” In coming to his opinion, Mr. Markell
indicated he looked at the actual project site, “all of the contracts,” how the projects will
be “operated and maintained,” “environmental aspects,” “technical inputs,” and “the
financial model.” Although he testified at trial that he worked on “around 300 projects” in
the energy industry, including projects involving anaerobic digester biogas and
wastewater treatment facilities, he admitted that “I have actually not worked on a fuel
cell [project] where I’ve been paid.” He testified he performed two reviews of multi-
kilowatt non-stationary fuel cell systems, although acknowledging that the RP1 and SJ-1
projects are stationary systems, each multiple megawatts in size. He testified that his
two prior informal reviews were conducted three to five years prior to this trial, and
lasted “[e]ach one probably a couple of hours.” Mr. Markell testified that he performed
39
The parties dispute the extent to which non-expert witnesses could be used to
provide opinion testimony. Plaintiffs note that although Mr. Leo, from FuelCell Energy,
was not offered as an expert witness, “[a]t trial, the Court noted Mr. Leo’s ‘great
qualifications,’” and, thus, plaintiffs contend, “Mr. Leo has a deep technical knowledge in
fuel cells and would be qualified to offer expert opinions.” Plaintiffs assert that, regarding
defendant’s expert witness, “Mr. Markell’s almost non-existent experience with fuel cell
power plants provides no substitute for Mr. Leo’s 30 years of experience in the fuel cell
industry,” even though Mr. Leo was not qualified as an expert witness. Plaintiffs contend
that “[w]here opinion testimony bears a ‘rational connection’ to those facts, the Court
has also held that a lay witness may ‘under certain circumstances express an opinion
even on matters appropriate for expert testimony,’” quoting in support Global Computer
Enter., Inc. v. United States, 88 Fed. Cl. 52, 67 (2009), and Union Pac. Res. Co. v.
Chesapeake Energy Corp., 236 F.3d 684, 692 (Fed. Cir. 2001). Regarding Mr. Sharma,
from Anaergia, plaintiffs also contend that “Arun Sharma likewise is a fuel cell industry
insider” and in certain areas his testimony should be given more weight than
defendant’s expert witness, “to opine on what the industry views as a fuel cell power
plant.”
Defendant responds that “[t]he Court should not rely on opinion statements from
Mr. Leo [of FuelCell Energy], because he was not offered or qualified as an expert,”
citing Rule 701 of the United States Federal Rules of Evidence. Defendant further states
that
While much of Mr. Leo’s testimony was permissible, F.R.E. 701 affects
how the testimony is accepted by the Court. Plaintiffs may not rely on the
statements they describe as being made from “his industry perch” or any
opinions he might have “as an experienced industry insider.” The Court
may take such testimony as statements of his personal belief, but it cannot
accept it as the opinion of an expert or as evidence of industry practice.
(internal citation omitted). Defendant also contends that Mr. Leo “cannot testify as to the
proper interpretation of the terms in the statute, whether from an industry or engineering
perspective, as Mr. Markell does (or as Mr. Wason could have done, had he been
asked to look at the statute).” Defendant further alleges that Mr. Sharma, from Anaergia,
is not a “‘fuel cell industry insider,’” and notes that “Mr. Sharma testified that the projects
were the first fuel cell projects for his company.” Defendant claims that the case
plaintiffs cite to “merely reiterates the basic standards that lay opinion testimony ‘“must
additional research in preparation of this case, but also admitted at trial that he did not
consult with any fuel cell manufacturers or contact FuelCell Energy as part of his
preparation, nor did he consult with anyone from the Department of Energy or the
National Energy Technology Laboratory, although he did review the documents offered
by the parties in this case. The government offered Mr. Markell, without objection from
plaintiffs, and the court admitted Mr. Markell as “an independent engineering expert in
the energy industry.”
40
have a rational connection,” to “facts within [the witness’s] range of generalized
knowledge, experience, and perception,” and such testimony may not be based upon
scientific, technical, or other specialized knowledge,’” quoting Global Computer Enter.,
Inc. v. United States, 88 Fed. Cl. at 67. (internal citations omitted in original).
Defendant alleges that plaintiffs’ witnesses are biased, stating “Mr. Markell was
the only truly independent witness to testify at the trial. Every other witness was
involved in the projects in some capacity and has either a direct or indirect financial
interest at stake in this litigation.” Defendant adds that plaintiffs’ descriptions of Mr.
Sharma, from Anaergia, and Mr. Leo, from FuelCell Energy, as “industry insider[s]” “just
highlights their inherent bias: they or their companies all stand to benefit from a broad
definition of fuel cell power plant.” Plaintiffs deny any incidence of bias and further
respond that defendant’s allegations of bias on the part of Mr. Leo are “cheap and not
reflective of the balanced and credible testimony that Mr. Leo provided.” Plaintiffs add
that “[t]he Government’s further assertion that Mr. Leo is not entitled to give fact and
opinion testimony on industry practice superior to their expert, who has no experience in
the fuel cell industry and who relied on Mr. Leo’s publications, is out of touch with this
Court’s position on lay witness opinion testimony.” (internal citation omitted).
Rule 701 of the 2015 Federal Rules of Evidence states:
If a witness is not testifying as an expert, testimony in the form of an
opinion is limited to one that is:
(a) rationally based on the witness’s perception;
(b) helpful to clearly understanding the witness’s testimony or to
determining a fact in issue; and
(c) not based on scientific, technical, or other specialized
knowledge within the scope of Rule 702.
Fed. R. Evid. 701 (2015) (FRE). The Federal Rules of Evidence have recognized
exceptions to the Rule 701(c) limitation on lay witness testimony “based on scientific,
technical, or other specialized knowledge.” See id. For example, a business owner or
executive, such as Mr. Sharma, President of Anaergia North America, could be allowed
to testify as to items he would be aware of as a result of his position. See Fed. R. Evid.
701, Advisory Committee Notes ¶ 4 (Dec. 2000) (“Such opinion testimony is admitted
not because of experience, training or specialized knowledge within the realm of an
expert, but because of the particularized knowledge that the witness has by virtue of his
or her position in the business.”). Similarly, Mr. Leo could be allowed to testify as to the
operations of FuelCell Energy, as well as their products and contractual relationships,
given his position as Vice President of Applications and Advanced Technologies for
FuelCell Energy.
The 2000 Advisory Committee Notes to FRE 701 state: “[T]he distinction
between lay and expert witness testimony is that lay testimony ‘results from a process
of reasoning familiar in everyday life,’ while expert testimony ‘results from a process of
reasoning which can be mastered only by specialists in the field.’” (internal citation
41
omitted). A judge of this court appropriately recognized that “‘the difficulty in
administering the 2000 amendment [is] drawing the line between lay and expert
testimony.’” DataMill, Inc. v. United States, 91 Fed. Cl. 722, 735 (2010) (quoting 1
McCormick On Evid. § 11 (Kenneth S. Broun et al. eds., 2006)); see also 1 McCormick
On Evid. § 11 (7th ed. 2013) (noting that “[t]estimony by physicians in civil cases can
pose the same line-drawing problems”). In DataMill, the judge concluded:
“The general application of Rule 701 indicates that a lay witness may
testify about facts within his or her range of generalized knowledge,
experience, and perception.” [United States v. ]Espino, 317 F.3d [788,
]797 [(8th Cir. 2003)]. The opinion “must have a rational connection to
those facts.” Miss. Chem. Corp. v. Dresser–Rand Co., 287 F.3d 359, 373
(5th Cir. 2002); accord Union Pac. Res. Co. [v. Chesapeake Energy
Corp.], 236 F.3d at 693 (sustaining the district court’s decision to admit
testimony from eight witnesses with “extensive personal experience” in the
oil drilling industry); Burlington N. R.R. Co. [v. State of Neb.], 802 F.2d
[994,] 1005 [(8th Cir. 1986)] (“A lay witness’ testimony in the form of
opinions or inferences need only be rationally based on perception . . . .”).
Where the testimony is based upon personal knowledge of the facts
underlying the opinion and the opinion is rationally related to the facts, a
lay witness may, “under certain circumstances[,] express an opinion even
on matters appropriate for expert testimony.” Soden v. Freightliner Corp.,
714 F.2d 498, 511 (5th Cir. 1983) (citing cases from the Eighth Circuit and
the United States Courts of Appeals for the Tenth Circuit).
Id. at 736.
In the above captioned, highly technical case, all the witnesses put forward by
the parties demonstrated they have significant knowledge of fuel cells and the fuel cell
industry, gained not through specialized study, but through their day-to-day experiences
in the field. In Global Computer Enterprises, Inc. v. United States, a decision by the
United States Court of Federal Claims cited to by both parties, the court discussed
whether or not lay witness opinion testimony “‘from individuals with decades of
experience’” working in information technology would be acceptable. See Global
Computer Enter., Inc. v. United States, 88 Fed. Cl. at 65. The judge concluded that,
“[a]s the Federal Circuit recognized in Union Pacific Resources Co., lay opinion
testimony based upon extensive experience in an industry is admissible under Rule
701.” Id. at 67 (citing Union Pac. Res. Co. v. Chesapeake Energy Corp., 236 F.3d at
693). The Global Computer Enterprises court allowed lay opinion testimony from the
experienced professionals, noting that “[a]ll of the proffered opinions of Messrs.
Muslimani, Lucas, and Winslow are based upon circumstances they have observed or
encountered within the industry and reflect a general knowledge of their work.” Id. In
BPLW Architects & Engineers v. United States, another judge of this court reiterated
that a lay witness can testify on his or her “perception,” as long as it is connected to
their personal knowledge. See BPLW Architects & Eng’rs, Inc. v. United States, 106
Fed. Cl. 521, 545 (2012) (citing DataMill, Inc. v. United States, 91 Fed. Cl. at 734; and 1
42
McCormick on Evidence § 10 (6th ed. 2006) (“[A] witness may testify to an event or
occurrence that he has seen himself, but not one that he knows only from the
description of others.”)).
A review of the testimony leads the court to conclude that plaintiffs’ witnesses did
not testify outside the range of their personal knowledge, based on what they learned
from their positions within Anaergia (Mr. Sharma) and FuelCell Energy (Mr. Leo). As
stated by the parties, the “overarching” question before the court is whether or not gas
conditioning equipment should be included in the cost basis used to calculate a grant
under Section 1603 of the American Recovery and Reinvestment Tax Act of 2009, Pub.
L. No. 111-5, Div. B, tit. I, § 1603, 123 Stat. 115, 364–66 (2009). The court references
the testimony of these fact witnesses insofar as it provides useful, specific, factual
background, based on their personal and work experience. In addition, the court notes
that defendant’s challenge to the admissibility of plaintiffs’ lay witness testimony is
complicated by the fact that defendant does not specify the responses from Mr. Sharma
and Mr. Leo with which it takes issue. Defendant’s counsel never objected to Mr.
Sharma’s testimony at trial. Regarding Mr. Leo’s direct testimony, defendant’s counsel
objected only once, when Mr. Leo was giving his interpretation of the Internal Revenue
Code in response to Mr. Markell’s expert report. Defendant’s objection was sustained at
that time and Mr. Leo’s responses on direct examination that were related to the topic
were struck. In its brief, however, defendant tries to cast a more general shadow over
plaintiffs’ witnesses without providing the specific statements that defendant considers
objectionable. Defendant’s belated discomfort is insufficient to disqualify the testimony
admitted into the record.
Regarding defendant’s allegation of bias on the part of plaintiffs’ witnesses,
determination of a witness’ bias and credibility based on the evidence before the court is
a factual question for the trial judge. The allegation appears to the court not to be one of
improper bias, but rather one of credibility with respect to choosing between plaintiffs’
and defendant’s witnesses. In that regard, the trier of fact has significant discretion. See
Anderson v. City of Bessemer City, N.C., 470 U.S. 564, 575 (1985) (“[W]hen a trial
judge’s finding is based on his decision to credit the testimony of one of two or more
witnesses, each of whom has told a coherent and facially plausible story that is not
contradicted by extrinsic evidence, that finding, if not internally inconsistent, can virtually
never be clear error.”); Honeywell Int’l, Inc. v. Hamilton Sundstrand Corp., 523 F.3d
1304, 1314 (Fed. Cir.) (citing Anderson v. City of Bessemer City, N.C., 470 U.S. at 575),
reh’g en banc denied (Fed. Cir.), cert. denied, 555 U.S. 939 (2008); Green v. United
States, 222 Ct. Cl. 600, 603, 650 F.2d 285 (1980) (“We adhere to the well-established
rule that the findings of the trier of the facts whose responsibility it was to weigh the
evidence, to hear and see the witnesses and to judge their credibility, and to observe
their demeanor and responses under oath and on cross-examination should be
sustained, absent serious prejudicial abuse of discretion, where there is substantial
credible evidence and a rational basis to support the findings”); see also Univ. of Colo.
Found., Inc. v. Am. Cyanamid Co., 342 F.3d 1298, 1304 (Fed. Cir.) (“‘Where there are
two permissible views of the evidence, the factfinder's choice between them cannot be
clearly erroneous.’” (quoting Am. Original Corp. v. Jenkins Food Corp., 774 F.2d 459,
43
462 (Fed. Cir. 1985))), reh’g and reh’g en banc denied (Fed. Cir. 2003), cert. denied,
541 U.S. 988 (2004).
After a review of the trial testimony and the record before the court, the court
finds no grounds in which to discount the testimony of plaintiffs’ witnesses due to bias. It
is true that the witnesses’ employers and partners stand to gain if plaintiffs win this
case. Mr. Sharma is the President of the indirect owner of RP1 and SJ-1, Anaergia. Mr.
Leo admitted at trial that “FuelCell Energy is the only company that’s selling fuel cells
that can be installed on digester gas.” Mr. Leo indicated that federal and state
“subsidies are important to encouraging the purchase and installation of fuel cells.” Mr.
Wason also confirmed that FuelCell Energy, Mr. Leo’s employer, is the only company
“supplying the equipment for the fuel cell power plants for anaerobic digester gas.” Mr.
Wason, plaintiffs’ expert, testified that he does work with fuel cell projects over
wastewater treatment plants, through his work with Carollo Engineers. Mr. Wason
assisted his client SJ-1 in securing California state Self-Generation Incentive Program
funding by sending a letter to the state government in support of the SJ-1 project’s
application. Mr. Wason emphasized at trial that his entire career of forty years has been
“working on wastewater treatment plants that are generating energy.” Nonetheless, all
the witnesses took oaths to tell the truth, and their credibility was reviewed by this court
during trial. Mr. Leo repeated at trial that his testimony was truthful and not impaired by
the indirect benefit FuelCell Energy may receive from the outcome of the case. Mr.
Wason also testified that his prior role in the SJ-1 project would not impair his ability to
give truthful expert testimony. Mr. Wason further stated that his team does not
traditionally become involved with the Section 1603 grant process as part of their
standard scope of services, although sometimes they get involved with the state-level
Self-Generation Incentive Program grants. Regarding the letter sent to the government
of California, Mr. Wason stated that “it’s very simple thing, so it’s not something I have
to go research it out, only spend one or two hours and I wrote that letter,” and he re-
clarified that the letter was to the state grant agency, not the federal Section 1603 grant
program. To the same extent as plaintiffs’ witnesses may indirectly stand to gain from a
favorable outcome, defendant’s expert witness could be said to gain from a favorable
outcome in the above captioned case. Defendant’s expert, Mr. Markell, also testified
that he is acting as an expert witness on behalf of the government in another case
related to the Section 1603 grant program in the United States Court of Federal Claims.
See, e.g., Furstenberg v. United States, 219 Ct. Cl. 473, 475–77, 595 F.2d 603, 604–05
(1979) (finding, with regards to the “possible bias” of an expert witness who was
testifying at trial on the valuation of a piece of art, yet also participating in an Art
Advisory Panel, an expert body which values works of art for the IRS, that “[t]here is no
reason to assume that, because an expert has expressed an opinion during confidential
deliberations of a particular panel and has heard the views of the other experts, he will
give anything other than his best independent expert judgment if called as a witness on
the question of valuation. . . . Furthermore, viewing an expert’s participation on the Art
Advisory Panel as creating personal bias might unnecessarily discourage distinguished
experts from participation on the panel, to the ultimate detriment of the Internal Revenue
Service and the tax system, or might reduce the availability of expert witnesses at
trial.”). Outside of defendant’s inferences in its briefs, defendant provides no compelling
44
evidence that plaintiffs’ witnesses were unduly biased in their testimony regarding the
RP1 and SJ-1 projects.
How Fuel Cells Operate
As explained by plaintiffs’ expert witness, Mr. Wason, “Fuel cells are relatively
recent” innovations that came to market in the past “about six to eight years. Before
that, most of the technology in the wastewater industry” for burning biogas “had been
internal combustion engines, microturbines and gas turbine[s].” Mr. Markell, defendant’s
expert witness, also stated: “Utilizing fuel cell power plants in conjunction with Biogas
from anaerobic digesters is a relatively recent application,” starting in 1997, and “[t]he
most recent installations of fuel cell power plants in conjunction with anaerobic digesters
started in 2008, with FCE [FuelCell Energy] taking the lead in providing larger fuel cell
power plants.”
Defendant’s expert witness, Mr. Markell, a professional engineer, offered an
introduction to how fuel cell systems operate in his expert report. According to Mr.
Markell, fuel cells systems installed at wastewater treatment plants utilize “four primary
systems: anaerobic digestion to produce Biogas, gas conditioning equipment to treat
the Biogas, a fuel cell power plant to generate electricity, and a heat recovery system.”
Mr. Markell offered a diagram in his report of how the alleged “four primary systems”
interact:
MARKELL DIAGRAM
Plaintiffs’ expert witness, Mr. Wason, offered an alternative diagram of how a fuel
cell facility interacts in his expert report, but avoided using the term “Gas Conditioning
Equipment” used by Mr. Markell. The plaintiffs’ expert report included a diagram,
reproduced below, which appears to have been modified from a diagram found in the
record related to an Anaergia “Case Study” regarding the SJ-1 project in San Jose.
(emphasis in original).
45
pounds is reduced, and as a part of the side thing it produces anaerobic
digester gas.
A website image, dated March 13, 2014, from the IEUA website, provided as a joint
exhibit, also explained that anaerobic digesters are “treatment units that reduce[] the
volume of organic matter by decomposition of the biosolids into relatively stable organic
and inorganic compounds from which water will separate more readily. In several ways,
anaerobic digestion functions similarly to the human stomach when it digests food.”
Mr. Sharma, from Anaergia, testified at trial that, from his experience, anaerobic
digesters are present at some wastewater treatment plants:
Some wastewater treatment plants have anaerobic digesters. Some
wastewater treatment plants might not have anaerobic digesters and they
might have aerobic digesters where biogas is not made. And some
wastewater treatment plants may not even have aerobic digesters. They
might just dry the biosolids or dewater it and get rid of them.
Mr. Sharma added that one of the reasons to install an anaerobic digester is to produce
and capture biogas that comes from the digestion process, which can be processed to
create electricity, as well as to “reduce the amount of solids that have to be disposed.”
Mr. Leo, from FuelCell Energy, testified that anaerobic digester biogas has about sixty
percent methane, and “that’s where most wastewater treatment plants are,” while
natural gas has about one hundred percent methane. Mr. Wason, plaintiffs’ expert
witness, further explained in his expert report that the anaerobic digestion “process
produces ADG [anaerobic digester biogas], which is approximately 60 to 65 percent
methane, 35 to 40 percent Carbon Dioxide and about 1 percent of other gasses and
contaminants,” which can be used by a fuel cell after it is treated.
According to the parties’ joint stipulation, the anaerobic digesters located at the
IEUA and at the San Jose Water Pollution Control Plant “produce both ‘biosolids’ and
‘biogas,’ consisting of methane, other gaseous elements, and various contaminants.
Biosolids are used to produce compost. Biogas may be discarded by burning it (in a
process called ‘flaring’) or may be used as a fuel source.” In the above captioned case,
the IEUA and San Jose Water Pollution Control Plant operated the anaerobic digesters,
which produced anaerobic digester biogas, prior to the installation of the RP1 and SJ-1
projects. Defendant’s expert, Mr. Markell, explained in his report that, prior to the
installation of the RP1 and SJ-1 fuel cell facilities, the IEUA and San Jose sites used
“reciprocating engines” to burn the biogas created by the anaerobic digesters, for
electricity. Mr. Markell added that a “reciprocating engine would simply replace the fuel
cell power plant in the diagram [diagram is above, offered by Mr. Markell]. Reciprocating
engines, which are similar to large automotive engines, are more tolerant of gas
impurities, but still require some level of gas conditioning.”
47
(2) Gas Conditioning Equipment
The trial testimony indicates that fuel cell systems can and do operate on
anaerobic digester biogas. Mr. Leo from FuelCell Energy explained that “[j]ust under
half of our projects in California are running on digester gas,” and that about twenty
percent of the company’s projects worldwide operate on digester gas, with the majority
of the remaining projects operating on natural gas. Mr. Wason, plaintiffs’ expert witness,
explained in his expert report that, significantly, “[r]aw ADG [anaerobic digester biogas]
is not a clean gas like natural gas,” and can damage a fuel cell if used directly without
treatment. Mr. Wason emphasized at trial that “[t]he gas coming from the anaerobic
digester does not meet the fuel specifications of FuelCell Energy equipment,” it could
“poison” a fuel cell module in under a day. Mr. Wason indicated that in terms of
contaminants in the anaerobic digester gas, “the most important one is the hydrogen
sulfide [sulfur], the second one is siloxane, the third one is water.” His report added that
“Fuel cells can’t operate properly without removing hydrogen sulfide and siloxanes
contaminants from ADG.” Mr. Leo, from FuelCell Energy, also testified that in its fuel
cell, “[t]he electrodes are acting like catalysts. And if you were to send a bunch of sulfur
over those electrodes, the sulfur molecules would occupy the normal catalytic reaction
sites and the fuel cell would stop working.”
Mr. Wason testified that due to the contaminants in anaerobic digester biogas, it
is generally standard to have gas conditioning equipment when working with biogas:
“Some kind of gas conditioning has always been necessary on anaerobic digester gas
because it comes out of the anaerobic digester as saturated gas. It’s saturated with
water, so at a minimum you must remove water.” Mr. Wason also added that “many of
the plants fall in jurisdiction of [California] Air Quality Management District, and many of
those have introduced legislation or regulations to minimize the amount of hydrogen
sulfide . . . .”
The parties jointly define “[g]as conditioning equipment,” to mean “[e]quipment
used to clean, treat, and process contaminants (e.g., sulfur, hydrogen sulfide, VOC
[volatile organic compounds], and siloxanes) from a fuel.” Mr. Wason, plaintiffs’ expert
witness, stated that “gas conditioning equipment takes in the raw anaerobic digester
gas coming from the digesters and cleans it up to a quality where it is required by
FuelCell Energy fuel specifications.” Mr. Markell, defendant’s expert witness, in his
expert report, stated that “[t]he gas conditioning system conditions the Biogas to meet
the gas specifications for the fuel cell power plant as defined by FCE’s fuel
specification.” Defendant’s expert report further explained: “H2S and siloxanes are
removed from the Biogas stream prior to use in a fuel cell power plant or a combustion
engine. Failure to remove such contaminants will result in serious damage to the
electricity generating equipment. As a result, utilizing gas conditioning equipment is an
industry standard.” Mr. Settle, from NREL, also testified that gas conditioning equipment
is necessary for a fuel cell to operate on biogas, and added: “I would suggest that if
you’re going to take raw digester gas and you’re going to put it into a fuel cell that you
have to clean it up with some sort of equipment in order for the fuel cell to maintain
48
good operation.” Mr. Markell added at trial that gas “conditioning systems are generally
complicated, expensive, and difficult to maintain.”
The parties have jointly stipulated that “[t]he ‘gas conditioning equipment’
supplied by ESC for the RP1 Project consists of the following equipment, corresponding
to ESC’s scope of supply, which are used to condition the digester gas from Inland
Empire prior to use in the fuel cells:” “Iron Sponge System,” “Compheet Gas Treatment
skid,” “Glycol Chiller skid,” “Hydrogen Sulfide Removal Vessels,” “Compheet Siloxane
Removal Vessels,” “Sil-X Conventional Siloxane Removal Vessels and Guard Bed
Removal Vessels,” “Sulfr Tri-X and Halogen Guard Vessels,” “ESC Control Panel,” and
“Skid-mounted wiring, piping and instrumentation.” The parties stipulated that similar
“gas conditioning equipment” was installed at the SJ-1 site, and was also supplied by
ESC Corporation.
Diving deeper into the specific components, Mr. Wason, plaintiffs’ expert witness,
explained that the “iron sponge,” one of the components of the RP1 and SJ-1 gas
conditioning systems mentioned above, is designed “to remove hydrogen sulfide.” Mr.
Wason’s testimony indicated that the siloxanes are removed through “two tanks full of
activated carbon filters,” which appears from a review of the record to refer to the
“Compheet Siloxane Removal Vessels,” mentioned above. Mr. Wason’s testimony also
indicated that the “chiller,” which appears from the record to refer to the “Glycol Chiller
skid,” “cools the anaerobic digester gas . . . and that takes most of the water out,” as
well as some siloxane and hydrogen sulfide. Mr. Wason testified that a gas conditioning
equipment also can have a compressor to prepare the gas for insertion into the fuel cell:
“If the pressure of the gas coming from the anaerobic digester -- if that’s not high
enough . . . so some of the plants will have a compressor or a blower to boost the gas
pressure up.” Mr. Wason stated, however, that for the SJ-1 plant, no compressor was
installed, because the “City of San Jose had compressors in their wastewater plant
which compressed all of their digester gas to about 50 psi,” a statement with which Mr.
Markell agreed. Mr. Wason added that although gas conditioning equipment is
purchased, installation is still customized to the local project: “[T]here’s more than one
way to do those things and we want it done a certain way, the way we have seen it
successful in other plants.” Mr. Wason testified that gas conditioning equipment
generally “comes on multiple skids, and then it’s piped and wired to wherever in the
field.”
Mr. Sharma, from Anaergia, testified that responsibility for the gas conditioning
equipment’s proper function lay with RP1 and SJ-1. Plaintiffs’ expert witness, Mr.
Wason, explained in his expert report that the “City of San Jose and IEUA municipal
agencies are not responsible for treating ADG [anaerobic digester gas]. UTS SJ-1 and
RP1 must supply the gas conditioning equipment and clean ADG to make it suitable for
fuel cell CHP [combined heat and power] plant use.”
49
(3) Natural Gas Desulfurizer
As indicated above, most FuelCell Energy fuel cells use natural gas as the sole
or primary fuel source. Mr. Leo, from FuelCell Energy, testified that all of FuelCell
Energy’s fuel cells are capable of running on natural gas. Defendant’s expert witness,
Mr. Markell, added that “[t]he standard equipment provided with an FCE fuel cell power
plant assumes operation on natural gas.” In addition, both the FuelCell Energy fuel cell
sales contracts to RP1 and SJ-1 stated that the fuel cells delivered are “typically fueled
with natural gas.” Mr. Sharma testified at trial that the RP1 and SJ-1 fuel cell facilities
can run on natural gas, for example, when the gas conditioning equipment does not
function and biogas is not available. Mr. Leo also testified that, even for fuel cell projects
that are designed to operate on anaerobic digester biogas:
the preferred approach to biogas these days is to have a dual-fuel
application where you’re using natural gas at least as a backup fuel in the
event that the biogas goes away.
So when you’re doing that, you’re dedicating the natural gas cleanup
system to natural gas, and so you need another cleanup system to
provide the biogas cleanup.
Nonetheless, according to the record, even natural gas needs pre-treatment
before use in a fuel cell. Mr. Settle, from NREL, stated that, in his understanding, natural
gas, when pulled from the field and sent in a natural gas pipeline, is conditioned to a
certain extent to create “pipeline quality natural gas.” Mr. Wason, plaintiffs’ expert
witness, added that natural gas from a pipeline is pre-treated to a certain specification
by the utility: “there’s the natural gas quality specs for natural gas coming through the
pipeline’s natural gas which it supplies to customers.” Mr. Wason testified that pipeline
quality natural gas is still insufficiently clean to be directly usable by a fuel cell:
“sometimes the content of hydrogen sulfide could be a little bit higher, and if it happens,
because it’s so critical to the fuel cell that it could damage it, that’s why they have the
desulfurization equipment as a standard to protect the fuel cell.” Mr. Leo, from FuelCell
Energy, testified at trial that: “[e]ven natural gas fuels require different approaches for
cleaning up.” Mr. Wason testified that it is not FuelCell Energy’s responsibility to operate
on natural gas straight from the pipeline, therefore, the developer of the fuel cell facility
itself has to clean the natural gas to meet the requirements set by FuelCell Energy.
The parties jointly define “desulfurizers” as “[e]quipment used to remove any
sulfur contaminants from fuel prior to its injection into the fuel cell modules.” At trial, the
witnesses went into further detail about how a natural gas desulfurizer operates. Mr.
Leo, from FuelCell Energy, described the natural gas desulfurizer that comes with a
FuelCell Energy fuel cell assembly:
So in our natural gas fuel treatment train we have gas conditioning
equipment that takes pipeline quality natural gas, which in the U.S. is
usually very dry, so you don’t have to worry about moisture. It has a little
50
bit of sulfur in it just to make it smell bad so that you know when it’s
leaking. We have to clean that out. And that’s the main part of our natural
gas cleanup system . . . .
Mr. Leo testified that gas conditioning equipment for anaerobic digester biogas, and
natural gas desulfurizers, are both similar “[a]t a very high level in terms of stripping out
the impurities.” 22 Mr. Leo described the biggest difference between the two systems as
being:
Biogas is typically made available out of the digester with a lot of moisture
that we would like to get rid of and a lot more sulfur than natural gas
typically has, so -- and at very low pressure. Natural gas is usually
available at pressure.
So a typical biogas conditioning system would both increase the pressure
of the gas, remove the water from the gas, usually by chilling, and remove
all that sulfur, in addition to some other things like siloxanes.
Mr. Markell, defendant’s expert witness, also testified that the natural gas desulfurizers
perform similar work as biogas gas conditioning equipment “[i]n the sense that they do
provide some cleaning of the gas, yes, but not to the same level.”
(4a) Fuel Cell Module
The parties have stipulated that “[f]uel cells convert a fuel into electricity through
an electrochemical process, without combustion. Fuel cells can operate on various
fuels, including biogas, if the inherent contaminants are removed to meet the fuel cell
manufacturer’s fuel specifications.” Mr. Leo, from FuelCell Energy, explained the basics
of fuel cell operation at trial:
[A]ll fuel cells work by reacting a fuel and oxygen, but they react it
differently than fuel and oxygen are usually reacted. Usually you take fuel,
you mix it with oxygen or air, and you ignite them and you make heat and
use that heat to spin a turbine or to boil water to make steam to spin
another kind of turbine.
And that is generally true, that if you take a fuel, a fuel that wants to
react with air, and mix it with air and ignite them, you will get heat.
But what fuel cells do is they react the fuel and the air in separate
compartments that are separated by an electrolyte. And when you do that,
if you connect a wire between those two compartments, instead of getting
22 In his testimony, Mr. Leo, from FuelCell Energy, did not distinguish between the
natural gas desulfurizers and biogas gas conditioning equipment, but instead often
referred to both as “gas conditioning equipment.”
51
heat, you’ll get electricity. And it’s a more direct way to convert the energy
content of the fuel to electricity than in the thermomechanical means that
are usually used.
Mr. Leo compared fuel cells to batteries at the trial:
If you look at a battery, inside a battery, say a nickel cadmium battery that
you might buy at the store, there’s nickel and there’s cadmium. And if you
were to mix those together, it would get hot. But because they’re
separated by an electrolyte layer, if you connect a circuit to them, instead
of getting heat, you’ll react them electrochemically, is the term, and you’ll
get electricity instead of heat.
Now, the difference between a battery and a fuel cell is that when
you stick batteries in your flashlight, eventually the battery died because
all the chemicals to support the electrochemical reaction are inside each
battery. In a fuel cell, the chemicals are continually pumped in. Instead of
nickel and cadmium, it’s fuel and air. And you just keep pumping them in,
and you’ll keep getting electricity out.
Q. And what happens to the gas in that process?
A. The fuel is -- in the case of our fuel cell specifically, methane is
sent into the fuel cell stacks where it’s converted to hydrogen, so the
hydrogens in the methane get stripped off and you end up with hydrogen
and CO2.
That hydrogen reacts in one of the compartments of the fuel cell,
which we call the anode, to produce electrons. And those electrons go out
into the circuit and they get consumed at the cathode. And the cathode is
where the air is reacted in a reaction that involves consumption of oxygen
and consumption of those electrons that the anode made.
Mr. Leo also testified that fuel cells are less polluting sources of fuel: “Because there’s
no combustion, that’s the – that’s one of the reasons why they’re so clean. A lot of the
pollution that comes from combusting a fuel is the result of the high flame temperature
that makes soot-type particulates. It makes nitrogen oxides that are smog precursors.”
Mr. Leo stated that what exits a fuel cell module “would be a little bit of CO2, water, and
what’s left of the oxygen in the air and the nitrogen that was in the air.”
Turning specifically to the fuel cells used in this case, the fuel cells supplied by
FuelCell Energy for the RP1 and SJ-1 facilities were molten carbonate-type fuel cells.
As testified to by Mr. Leo, from FuelCell Energy, “[o]ur main commercial product line is a
specific type of fuel cell called the molten carbonate fuel cell, which we call the Direct
FuelCell because it has a feature that allows fuel to be sent directly to the stacks
52
instead of going through a separate reforming[ 23] system. And that’s our main
commercial line.” Mr. Markell, defendant’s expert witness, stated in his report that
“[m]olten carbonate fuel cells operate at relatively high temperatures (sometimes in
excess of 1,200 degrees Fahrenheit) and can operate as high as 60 percent efficiency.”
Mr. Markell inserted into his report, which was provided to the court, a functional
diagram of a molten carbonate fuel cell, taken from a report by FuelCell Energy:
(HRU stands for Heat Recovery Unit). Mr. Markell explained in his report: “The fuel cell
takes in fuel and air, which react with a specifically designed anode and cathode, with
an electrolyte (a molten carbonate solution) in between to develop an electrical current
(DC power) similar to a battery.”
The FuelCell Energy report, referenced by Mr. Markell in his expert report and
above, is titled “Stationary Fuel Cell Power Systems with Direct FuelCell
Technology Tackle Growing Distributed Baseload Power Challenge,” (emphasis in
original), and goes into further detail about how molten carbonate fuel cells generate
electricity through the anode and cathode, including the following:
Fuel and air reactions for the molten carbonate Direct FuelCell occur at
the anode and cathode, which are porous nickel (Ni) catalysts. The
cathode side receives oxygen from the surrounding air. As can be seen in
Figure 1 [the below figure], hydrogen is created in the fuel cell stack
through a reforming process, which produces hydrogen from the reforming
reaction between the hydrocarbon fuel and water. The gas is then
23Mr. Leo later explained that “reforming” “is that process where we convert methane to
hydrogen,” because “almost all fuel cells want to consume hydrogen in their anode to
make electricity.” Mr. Leo added that “what’s unique about our version of the fuel cell
technology is that process occurs inside the fuel cell stack . . . . When you do it inside
the fuel cell stack, the heat [required] comes from waste heat from the fuel cell reaction,
so it’s a much more efficient way to do it.” Mr. Leo added that this is why the model sold
by FuelCell Energy is called “Direct FuelCell.”
53
consumed electrochemically in a reaction with carbonate electrolyte ions
that produces water and electrons.
The electrons flow through an external circuit to provide the power to the
fuel cell load, and then return to be consumed in the cathode
electrochemical reaction. The O2 supplied to the cathode, along with CO2
recycled from the anode side, reacts with the electrons to produce
carbonate ions that pass through the electrolyte to support the anode
reaction. The electron flow through the external circuit produces the
desired power (DC current). An inverter[ 24] is used to convert the DC
output to AC.
Mr. Markell added in his report:
The electricity generated by a single fuel cell is generally in the range of
0.5 volts to 1.0 volts, which is too small to be a power source. In order to
increase the voltage of the output of the fuel cell, a number of individual
fuel cells are combined or “stacked” to create a fuel cell stack.
Mr. Markell stated in his expert report that for the fuel cells operated by RP1 and SJ-1,
“[e]ach fuel cell module consists of four separate fuel cell stacks. FCE specifies four fuel
cell stacks per fuel cell module.”
24 Mr. Leo stated that since fuel cells produce direct current power, and the electricity
grid operates on alternating current, the power is converted from direct current to
alternating current “in a device that’s called an inverter.”
54
(4b) Fuel Cell Assembly
Mr. Leo, from FuelCell Energy, discussed at trial the other components that can
go into a fuel cell assembly, particularly those supplied by FuelCell Energy, as part of its
“standard scope of supply.” Mr. Leo explained that FuelCell energy delivered “one
DFC3000 to RP1 and the DFC1500 to San Jose.” The parties have stipulated that “[t]he
pieces of equipment provided by FuelCell Energy as part of its standard scope of supply
for the DFC3000,” delivered to RP1, “are shown in the figure below:”
The parties further stipulated that the “standard scope of supply” for the DFC3000 fuel
cell assembly, as shown above, includes the following “fuel cell equipment:”
• “Two fuel cell modules. . . The fuel cell module is the individual piece of
equipment that actually performs the electrochemical conversion of the fuel
into DC electric power for the DFC3000.”
• “Desulfurization skid [natural gas desulfurizers] . . . In the RP1 Project, the
natural gas supply feeds into the desulfurizers, which are used to remove any
sulfur contaminants in natural gas that do not meet the fuel specification.” Mr.
Leo from FuelCell Energy added at trial that “they’re not mounted on the main
process skid. They’re separate,” although they are part of the standard scope
of supply.
55
• “Main Process skid. The Main Process skid is the internal heat recovery unit
(not the waste heat recovery equipment . . .) that heats up the fuel and water
used in the fuel cell modules”
• “Water Treatment System (‘WTS’) skid. The WTS skid treats the water used
in the fuel cells and removes contaminants and impurities. The WTS skid
includes the control panel for the fuel cells”
• “Two Power Conditioning Units (‘PCUs’). The PCUs convert the DC power
produced in the fuel cell modules into utility grade AC power. There is one
PCU for each fuel cell module in the RP1 Project.”
• “Transformer. The transformer is used to increase the voltage of the AC
current.”
(all internal citations omitted). The parties jointly stipulated that “FuelCell Energy also
supplied the following additional equipment for the RP1 Project as part of its scope of
supply,” although these components do not appear to be part of the “standard” scope of
supply for the DFC3000: “Customer Data Interface Option,” “High Ambient (120F)
Package,” “Customer Critical Bus,” “Load Leveler,” “Fuel Blending and Switching
System,” “Inter-skid Cable Kit,” and “Switchgear.”
According to the parties, identical equipment was installed by FuelCell Energy at
the SJ-1 site, although in a different configuration, and, in particular, with only one fuel
cell module and power conditioning unit as opposed to two. The parties also stipulated
that the “Switchgear” was part of the standard scope of supply for the DFC1500, while it
was additional equipment for the DFC3000. Mr. Leo, from FuelCell Energy, confirmed at
trial that the pieces of equipment for the DFC1500, installed at SJ-1, were “[e]ssentially
the same” as the pieces of equipment for the DFC3000 installed at the RP1 site, and
that his testimony as related to the RP1 site pertained to the SJ-1 site as well. Mr.
Wason, plaintiffs’ expert witness, also stated that the RP1 and SJ-1 projects were
identical except “there’s two of those [fuel cell] modules instead of one, so instead of
one 1400 [kilowatt module], it’s two 1400 [kilowatt modules] put together.”
Mr. Leo, from FuelCell Energy, explained that the company’s fuel cell projects
are generally “turnkey projects,” which means that the company provides “the
equipment, the installation services, a complete wrap of a project for a customer, so the
customer doesn’t have to install it.” Mr. Leo also explained that in a turnkey project
FuelCell Energy offers maintenance services that involve “complete operation services
of the power plant. The customer literally has to do nothing. We monitor the power
plants remotely. If the power plants need attention, we can adjust their output remotely
or send technicians to the site. We completely operate the power plant.” Although Mr.
Leo testified at trial that “[a]ny fuel cell power plant project would be a turnkey project,”
Mr. Leo also testified that FuelCell Energy has never been involved in a turnkey project
involving anaerobic digester gas, indicating that they did not perform the turnkey
projects for the RP1 and SJ-1 projects. A review of the record indicates that although
56
San Jose and the IEUA sought “turnkey” projects in their solicitations, in the case
currently before the court, HDR Design-Build and Otto H. Rosentreter Co. acted as the
EPC contractors, 25 not FuelCell Energy. 26
Section 1603
The genesis of this suit lies in Section 1603 of the American Recovery and
Reinvestment Act of 2009, Pub. L. No. 111-5, 123 Stat 115. Division B, Title 1 of the Act
is titled the “American Recovery and Reinvestment Tax Act of 2009.” See ARRTA §
1000. Section 1603 of the ARRTA, as amended by section 707 of the Tax Relief,
Unemployment Insurance Reauthorization, and Job Creation Act of 2010, Pub. L. No.
111-312, § 707, 124 Stat 3296, 3312, 27 states in relevant part:
(a) IN GENERAL.—Upon application, the Secretary of the Treasury shall,
subject to the requirements of this section, provide a grant to each person
who places in service specified energy property to reimburse such person
for a portion of the expense of such property as provided in subsection (b).
No grant shall be made under this section with respect to any property
unless such property—
(1) is placed in service during 2009, 2010, or 2011, or
25 The parties jointly defined EPC Contractor as “[t]he contractor providing EPC
services” and EPC as “[e]ngineering, procurement, and construction (a standard type of
contract).”
26 Mr. Markell, defendant’s expert witness, stated in his report that the “final component
utilized by the Projects is a heat recovery system. A molten carbonate fuel cell as
utilized in the DFC1500 [used by SJ-1] and DFC3000 [used by RP1] fuel cell power
plant will give off excess heat that can be captured by a heat recovery system and then
used to generate steam or hot water.” Mr. Sharma explained at trial that a heat recovery
unit can “increase the efficiency of the entire power plant.” Plaintiffs’ expert report did
not discuss the heat recovery unit, however, the heat recovery unit is not at issue in this
case.
27 Section 707 of the Tax Relief, Unemployment Insurance Reauthorization, and Job
Creation Act of 2010 amended Section 1603 by extending the grants available under
the section to projects “placed in service” through 2011, whereas the original American
Recovery and Reinvestment Tax Act of 2009 only covered projects “placed in service”
up through 2010. See Tax Relief, Unemployment Insurance Reauthorization, and Job
Creation Act of 2010, Pub. L. No. 111-312, § 707, 124 Stat. 3296, 3312. Section
407(c)(2) of the American Taxpayer Relief Act of 2012 also amended Section 1603 by
striking “placed in service” from paragraphs (1) and (2) of subsection (a) and inserting
“originally placed in service by such person.” See American Taxpayer Relief Act of
2012, Pub. L. No. 112-240, § 407(c)(2), 126 Stat. 2313, 2342.
57
(2) is placed in service after 2011 and before the credit termination
date with respect to such property, but only if the construction of
such property began during 2009, 2010, or 2011.
(b) GRANT AMOUNT.—
(1) IN GENERAL.—The amount of the grant under subsection (a)
with respect to any specified energy property shall be the
applicable percentage of the basis of such property.
(2) APPLICABLE PERCENTAGE.—For purposes of paragraph (1),
the term “applicable percentage” means—
(A) 30 percent in the case of any property described in
paragraphs (1) through (4) of subsection (d), and
(B) 10 percent in the case of any other property.
(3) DOLLAR LIMITATIONS.—In the case of property described in
paragraph (2), (6), or (7) of subsection (d), the amount of any grant
under this section with respect to such property shall not exceed
the limitation described in section 48(c)(1)(B), 48(c)(2)(B), or
48(c)(3)(B) of the Internal Revenue Code of 1986, respectively, with
respect to such property.
(c) TIME FOR PAYMENT OF GRANT.—The Secretary of the Treasury
shall make payment of any grant under subsection (a) during the 60-day
period beginning on the later of—
(1) the date of the application for such grant, or
(2) the date the specified energy property for which the grant is
being made is placed in service.
(d) SPECIFIED ENERGY PROPERTY.—For purposes of this section, the
term “specified energy property” means any of the following:
(1) QUALIFIED FACILITIES.—Any qualified property (as defined in
section 48(a)(5)(D) of the Internal Revenue Code of 1986) which is
part of a qualified facility (within the meaning of section 45 of such
Code) described in paragraph (1), (2), (3), (4), (6), (7), (9), or (11)
of section 45(d) of such Code.[ 28]
28 Mr. Settle from NREL added at trial that the Section 1603 grant program references
“two specific sections in the tax code, [I.R.C.] section 45, production tax credit, and
section 48, investment tax credit.” Mr. Settle added:
58
(2) QUALIFIED FUEL CELL PROPERTY.—Any qualified fuel cell
property (as defined in section 48(c)(1) of such Code).
(3) SOLAR PROPERTY.—Any property described in clause (i) or
(ii) of section 48(a)(3)(A) of such Code.
(4) QUALIFIED SMALL WIND ENERGY PROPERTY.—Any
qualified small wind energy property (as defined in section 48(c)(4)
of such Code).
(5) GEOTHERMAL PROPERTY.—Any property described in
clause (iii) of section 48(a)(3)(A) of such Code.
(6) QUALIFIED MICROTURBINE PROPERTY.—Any qualified
microturbine property (as defined in section 48(c)(2) of such Code).
(7) COMBINED HEAT AND POWER SYSTEM PROPERTY.—Any
combined heat and power system property (as defined in section
48(c)(3) of such Code).
(8) GEOTHERMAL HEAT PUMP PROPERTY.—Any property
described in clause (vii) of section 48(a)(3)(A) of such Code.
Such term shall not include any property unless depreciation (or
amortization in lieu of depreciation) is allowable with respect to such
property.
...
So section 45 essentially covers the production tax credit, and that
includes projects like wind, wind energy projects, biomass projects,
projects dealing with landfill gas, projects that are fed with municipal solid
waste, and so forth.
And section 48 is dealing with projects such as solar electricity, solar
thermal, fuel cells, microturbines, combined heat and power, and so forth.
A review of Section 1603 indicates that grants made pursuant to Section 1603(d)(1)
involve determinations of eligibility under I.R.C. § 45, titled “Electricity produced from
certain renewable resources, etc.,” generally known as a Production Tax Credit. On the
other hand, grants made pursuant to Section 1603(d)(2) through (8) involve
determinations of eligibility under I.R.C. § 48, titled “Energy credit,” generally known as
an Investment Tax Credit.
59
(h) DEFINITIONS.—Terms used in this section which are also used in
section 45 or 48 of the Internal Revenue Code of 1986 shall have the
same meaning for purposes of this section as when used in such section
45 or 48. Any reference in this section to the Secretary of the Treasury
shall be treated as including the Secretary’s delegate.
(capitalization in original).
Under Section 1603(a), grants are awarded to those entities who place in service
a “specified energy property,” assuming other size and procedural requirements were
met. See Section 1603(a). The grant “with respect to any specified energy property” is
equal to an “applicable percentage of the basis of such property.” See Section
1603(b)(1). The percentage of the grant, either ten or thirty percent of the project’s cost
basis, depends upon what type of “specified energy property” the grant is for. See
Section 1603(a), (b)(2). In calculating cost basis for a project, Mr. Settle from NREL
testified that “the basis of the project is generally the amount of the investment in the
project, the tangible personal property that’s integral to producing the electricity, for
each of those technologies.”
Qualified Fuel Cell Property
When plaintiffs applied for Section 1603 grants, they applied for a grant under the
“Fuel cell property” option, which was one of the eight facility types made available on
the application by the government as eligible for a grant under Section 1603(d). The
application allowed only one choice to be indicated for the type of specified energy
property. Under Section 1603(d)(2), a thirty percent grant is available for:
QUALIFIED FUEL CELL PROPERTY.—Any qualified fuel cell property (as
defined in section 48(c)(1) of such Code).[ 29]
(capitalization in original). The statute at 26 U.S.C. (I.R.C.) § 48(c) (2012), states in
relevant part:
(c) Definitions
For purposes of this section—
(1) Qualified fuel cell property
(A) In general
29 Section 48 of the Internal Revenue Code, “Energy credit,” also known as an
Investment Tax Credit, is part of Chapter 1, Subchapter A, Part IV, Subpart E of the
Internal Revenue Code, “Rules for Computing Investment Credit.” Subpart E covers
I.R.C § 46, “Amount of credit,” through I.R.C. § 50, “Other special rules.”
60
The term “qualified fuel cell property” means a fuel cell
power plant which—
(i) has a nameplate capacity of at least 0.5 kilowatt of
electricity using an electrochemical process, and
(ii) has an electricity-only generation efficiency greater
than 30 percent.
(B) Limitation
In the case of qualified fuel cell property placed in service
during the taxable year, the credit otherwise determined
under subsection (a) for such year with respect to such
property shall not exceed an amount equal to $1,500 for
each 0.5 kilowatt of capacity of such property.
(C) Fuel cell power plant
The term “fuel cell power plant” means an integrated system
comprised of a fuel cell stack assembly and associated
balance of plant components which converts a fuel into
electricity using electrochemical means.
(D) Termination
The term “qualified fuel cell property” shall not include any
property for any period after December 31, 2016.
(emphasis in original).
The parties jointly state that the issue before the court is “whether gas
conditioning equipment installed by plaintiffs as part of the RP1 and SJ-1 projects is
included within the statutory definition of ‘qualified fuel cell property’” under Section
1603(d)(2), “which refers to 26 U.S.C. § 48(c)(1).” In their post-trial filings, the parties
have not relied on any case law that directly supports their positions and have
previously indicated that this is a case of first impression. Under I.R.C. § 48(c)(1), “fuel
cell power plant” is defined as:
(C) Fuel cell power plant
The term “fuel cell power plant” means an integrated system comprised of
a fuel cell stack assembly and associated balance of plant components
which converts a fuel into electricity using electrochemical means.
Id. (emphasis in original). This definition can be read as having three distinct parts:
61
1. “integrated system,”
2. “comprised of a fuel cell stack assembly and associated balance of plant
components,”
3. “which converts a fuel into electricity using electrochemical means.”
Integrated System
Plaintiffs contend that the term “integrated system” within I.R.C. § 48(c)(1)(C) is
broadly defined and does not exclude gas conditioning equipment from the definition of
“fuel cell power plant.” Plaintiffs state: “[t]he statute [I.R.C. § 48] does not separately
define the term ‘integrated system.’ The term, however, is defined by the language that
immediately follows—‘comprised of a fuel cell stack assembly and associated balance
of plant components.’” Defendant, similarly, does not contend that gas conditioning
equipment is excluded from the term “integrated system” in the “fuel cell power plant”
definition, but instead asserts that the term is vague and, thus, must be clarified by other
parts of the definition. Defendant states, “[a]t trial, the witnesses agreed that the term
‘integrated’ is vague.” Defendant adds that, in a fuel cell facility, all the components,
from the wastewater treatment plant to the heat recovery unit, “are, in some fashion,
integrated. Such a vague term is given substance only by the rest of the statutory
language.” A review of statute and case law likewise does not provide a definition of
“integrated system.” Looking to the trial testimony, Mr. Markell, defendant’s expert
witness, stated that there is no technical definition for the word “integrated.” Mr. Leo
from FuelCell Energy likewise indicated at trial that there can be many “integrated
systems” within a single facility. Mr. Leo’s testimony also indicated that the gas
conditioning equipment and fuel cells are interconnected, stating “[i]t’s integrated into
the system. We provide power to it. We get control signals from it. It’s integrated into our
system.” It would, therefore, appear that whether or not gas conditioning equipment is
part of a “fuel cell power plant” is not possible just by looking at the term “integrated
system.”
Despite the vagueness in the definition of “integrated system,” plaintiffs try to give
substance to the term. Plaintiffs first point the court to the Treasury Regulations, and, in
particular, 26 C.F.R. (Treas. Reg.) § 146-5 (2014). 30 Treasury Regulation § 1.46-
5(e)(3)(ii) states: “Property is part of an integrated unit only if the operation of that item
is essential to the performance of the function to which the unit is assigned.” Noting the
phrase “essential to the performance of the function to which the unit is assigned,”
plaintiffs contend that a system is integrated if it is “functionally interdependent.” Treas.
Reg. § 146-5(e)(3)(ii). Plaintiffs quote from a decision issued by the United States Court
30 As discussed more below, Treasury Regulation § 1.46-5, “Qualified progress
expenditures,” clarified I.R.C. § 46, “Amount of credit,” a neighboring provision of the
Internal Revenue Code to I.R.C. § 48. Defendant takes issue with plaintiffs’ reference to
Treasury Regulation § 1.46-5, as is discussed further below.
62
of Appeals for the Third Circuit, Armstrong World Industries, Inc. v. Commissioner,
which states:
“In sum, courts appear to agree that individual components will be
considered as a single property for tax purposes when the component
parts are functionally interdependent—when each component is essential
to the operation of the project as a whole and cannot be used separately
to any effect. The converse, thus, should be equally valid in this case.
Accordingly, if a project has component parts which can function as
planned in a wholly independent manner, then a court may find that each
component is a ‘property . . . placed in a condition or state of readiness
and availability for a specifically assigned function.’”
Armstrong World Indus., Inc. v. Comm’r, 974 F.2d 422, 434 (3d Cir. 1992) (quoting
Consumers Power Co. v. Comm’r, 89 T.C. 710, 723 (1987)) (emphasis and modification
in Armstrong World Indus., Inc. v. Comm’r). Plaintiffs also cite to Hawaiian Independent
Refinery, Inc. v. United States, 697 F.2d 1063, 1069 (Fed. Cir.), cert. denied, 464 U.S.
816 (1983), Public Service Co. v. United States, 431 F.2d 980 (10th Cir. 1970), and
Consumers Power Co. v. Commissioner, 89 T.C. 710, for the proposition that a project
is viewed as “integrated” by courts “‘when the component parts are functionally
interdependent.’” (quoting Armstrong World Indus., Inc. v. Comm’r, 974 F.2d at 434).
Plaintiffs state that, in the case currently before this court, “[t]he gas conditioning
equipment and fuel cell equipment for the two Projects are ‘functionally
interdependent.’” 31
Plaintiffs argue that whether a component is part of an “integrated system”
should depend on the interdependence or necessity of that component to the system.
31 Although the principal cases plaintiffs cite, Armstrong World Industries, Inc. v.
Commissioner, 974 F.2d 422, Hawaiian Independent Refinery, Inc. v. United States,
697 F.2d 1063, Public Service Co. v. United States, 431 F.2d at 980, and Consumers
Power Co. v. Commissioner, 89 T.C. 710, are relevant for resolution of the case
currently before the court, they do not use the phrase “integrated system.” The cases
indicate that the Internal Revenue Code views two items as “integrated” “when each
component is essential to the operation of the project as a whole and cannot be used
separately to any effect.” See Armstrong World Indus., Inc. v. Comm’r, 974 F.2d at 434;
see also Hawaiian Indep. Refinery, Inc. v. United States, 697 F.2d at 1069 (noting that
two parts of a tanker-pipeline facility “in conjunction with the refinery itself, functionally
form a single property” (internal quotation omitted)); Pub. Serv. Co. v. United States,
431 F.2d at 983–84 (concluding that all the elements of a power plant were placed in
service at the same time as one property, because “all of them properly fitted together
by the contractor, together with the building, constituted a complete unit which was
operational and served the purpose intended by appellee.”); Consumers Power Co. v.
Comm’r, 89 T.C. 726 (“In our opinion, based on the foregoing, the Ludington Plant
must be viewed as one integrated unit because the physical plant and the reservoir
operate simultaneously and as a unit in order to produce electrical power.”).
63
According to the plaintiffs, the record indicates that the gas conditioning equipment is
necessary to the operation of the RP1 and SJ-1 facilities on anaerobic digester biogas.
Mr. Wason, plaintiffs’ expert witness, emphasized multiple times at trial that a fuel cell
system, designed to operate on anaerobic digester biogas “cannot work without the gas
conditioning, so gas conditioning is an essential part of an anaerobic digester gas fuel
cell power plant.” Mr. Wason also noted that the gas conditioning equipment and fuel
cells are functionally connected: “their [gas conditioning equipment] operation has to be
coordinated with the fuel cell, because if some of this is not working properly, you want
to shut down or you want to switch it to natural gas until you find what the problem is.”
Mr. Markell’s expert report for the defendant explained that biogas contains many
contaminants, and “[f]ailure to remove such contaminants will result in serious damage
to the electricity generating equipment. As a result, utilizing gas conditioning equipment
is an industry standard.” Mr. Settle, from NREL, stated: “I would suggest that if you’re
going to take raw digester gas and you’re going to put it into a fuel cell that you have to
clean it up with some sort of equipment in order for the fuel cell to maintain good
operation.”
Defendant responds that “[a]s with the term ‘integrated’, ‘functional
interdependence’ is a loose term that could apply to almost anything at the entire
wastewater treatment plant. The digesters, for example. [sic] are functionally
interdependent with the projects’ heat recovery systems, which ensure that the
microbes have a suitable environment.” Defendant, however, also admits that
“integrated system” does not, by itself, exclude gas conditioning system from the ambit
of “fuel cell power plant.” See I.R.C. § 48(c)(1)(C).
Balance of Plant Components
Within the definition of a “fuel cell power plant” under I.R.C. § 48(c)(1)(C),
plaintiffs place the most emphasis on the phrase that follows “integrated system,” the
phrase “comprised of a fuel cell stack assembly and associated balance of plant
components.” Plaintiffs state: “[t]he evidence demonstrates that the gas conditioning
equipment is integral balance of plant for the fuel cell power plant.” Plaintiffs contend
that “balance of plant” is a broadly defined term that incorporates the gas conditioning
equipment. According to plaintiffs, their expert witness, “Mr. Wason testified that term
‘balance of plant’ means ‘the rest of the plant. It’s the rest of the plant which is needed
for this plant to work properly,’” Plaintiffs add that defendant’s expert witness, “Mr.
Markell similarly testified that the term ‘balance of plant’ is ‘a generally accepted
industry term’ and defined that term broadly as ‘everything else.’” Plaintiffs also note
that Mr. Leo, from FuelCell Energy, is “an industry insider” with “almost 30 years
experience in the fuel cell industry” and point to Mr. Leo’s testimony that a fuel cell
power plant “balance of plant” means all that “‘is required to make the stacks operate
based on the available fuel.’” Plaintiffs also note that the testimony of Mr. Sharma is
relevant as a “fuel cell industry insider and an officer of the owner of the Projects,” and
that Mr. Sharma noted “‘there is a clear boundary where the gas comes in and
electricity goes out or hot water goes out. That’s the boundary. Everything on the other
side [sic] is the fuel cell plant,’” and, therefore, balance of plant.
64
Defendant initially contends that the term “‘Balance of plant’ is no more useful”
than “integrated system” to determine the meaning of the statute, and that “neither term,
on its own, can provide a boundary to the statutory definition. That must come from the
operative phrase ‘converts a fuel to electricity.’” Defendant adds: “As plaintiffs’ expert
stated, ‘balance of plant’ just means the ‘rest of it.’ In other words, one must define plant
before one can define balance of plant.” (internal citation omitted). Defendant also adds
that “[e]ven the Glossary from the U.S. Energy Information Administration, referred to by
plaintiffs, includes a similarly vague definition of ‘plant’: ‘A term commonly used either
as a synonym for an industrial establishment or a generating facility or to refer to a
particular process within an establishment.’” (citations omitted). According to defendant,
however, a “plant” within I.R.C. § 48(c)(1)(C) must be restricted “to the system that
converts fuel to electricity.”
The trial testimony supports that the phrase “balance of plant” is a broadly
defined term that would not, upon an initial reading, prevent gas conditioning equipment
from falling under its umbrella. As noted above, the experts for both the plaintiffs and
defendant, Mr. Wason and Mr. Markell, at times indicated that “balance of plant” means
simply, “the rest of the plant” or “everything else.” As Mr. Wason, plaintiffs’ expert
witness, emphasized:
This is so straightforward. I know we’ve been spending a lot of time here,
but the overall principle is so simple, you know. This needed certain
quality of gas. The raw gas is too dirty for this application. Without this
equipment, fuel cell cannot work, so how could somebody design a fuel
cell without it, how could somebody question that this is not the balance of
the plant. It’s just – I’m surprised.
Mr. Wason stated that “without this [the gas conditioning equipment] you can’t meet the
fuel specs. Therefore, you can’t run without it. Therefore, it’s a part of this plant. It is a
balance of the plant.” Mr. Wason also discussed prior anaerobic digester biogas-fed fuel
cells that had failed because they did not have effective gas conditioning equipment:
“And that’s one of the history of the UTC power fuel cells which have failed in Cincinnati
and New York because all of them had a deficient gas conditioning equipment.” Mr.
Markell, defendant’s expert, agreed that “balance of plant” is a broad term and is
defined as “a generally accepted industry term that describes everything else.” As noted
above, both Mr. Sharma, from Anaergia, and Mr. Leo, from FuelCell Energy, also
testified that, based on their experience, “balance of plant” covers everything in the fuel
cell facility that helps the fuel cells to operate on anaerobic digester biogas. Mr. Leo
added that “balance of plant” is not an imprecise term simply because it is broad: “so
when we use the term, we mean a very specific thing, which is all the non-stack stuff
that is required for the fuel cell to operate.”
Although defendant admits that “balance of plant” is a broadly defined term,
defendant presents, albeit scattered throughout its briefs and trial testimony, three
separate arguments for why it believes “balance of plant” as used in I.R.C. § 48(c)(1)(C)
65
is nonetheless limited, so as to not cover the gas conditioning equipment installed by
RP1 and SJ-1. Defendant, first, contends that the gas conditioning equipment is not
“balance of plant,” but instead, “balance of project,” because “balance of plant” refers to
the narrow set of components that relate to the fuel cell module. In support, defendant
points to Mr. Markell’s expert testimony for the defendant, as well as the FuelCell
Energy fuel cell sales and service contracts, which provide a definition of “balance of
plant” that encompasses only the components provided by FuelCell Energy, and not the
components provided by other manufacturers (such as the gas conditioning equipment,
supplied by ESC Corporation). Second, defendant contends that “balance of plant” only
refers to what is required for the fuel cells to operate on natural gas, and does not
include components necessary to enable the RP1 and SJ-1 facilities to operate, as
intended contractually, on anaerobic digester gas. According to defendant, plaintiffs’
argument “that the gas conditioning equipment is necessary to operate their projects as
intended is simply beside the point. The statute contains no reference to the intended
purpose of a project or even to alleged contractual necessity.” Third, defendant points to
the phrase following “balance of plant components” in the definition of “fuel cell power
plant” under I.R.C. § 48(c)(1)(C), the phrase “which converts a fuel into electricity.”
Defendant contends this phrase limits the definition of “balance of plant” to exclude
biogas gas conditioning equipment, because this equipment “does not convert a fuel to
electricity; it cleans biogas such that it can be used as a fuel in the fuel cell.” See I.R.C.
§ 48(c)(1)(C).
Defendant argues that, according to Mr. Markell’s testimony and the FuelCell
Energy sales and service contracts, “balance of plant” refers only to what was directly
sold to RP1 and SJ-1 by FuelCell Energy. Defendant states: “Under its [the FuelCell
Energy sales and services contracts’] definitions, the ‘fuel cell power plant’ is its fuel cell
equipment, and the balance of plant is everything it provides other than the fuel cell
module. It does not include the gas conditioning equipment.” In support of this view, Mr.
Markell, defendant’s expert witness, testified at trial that “balance of plant” depends on
the meaning of the word “plant.” Mr. Markell explained at trial: “Typically in the power
industry you have what’s called a power island. That’s the major portion that produces
power. And in this case it would actually be the fuel cell modules that produce
power . . . ,” referring to the fuel cell modules supplied by FuelCell Energy. Mr. Markell
stated, “[i]n this case, really it’s the fuel cell modules that is the power island.” Mr.
Markell concluded, therefore, that the “power island” is the “plant” in “balance of plant,”
and, therefore, “balance of plant” should only relate to the fuel cell module. As opposed
to the “balance of plant” for the fuel cell module, Mr. Markell testified at trial that the
remaining equipment at the RP1 and SJ-1 sites, including the gas conditioning
equipment, relate to “the overall project,” and should be called “balance of project,” not
“balance of plant.”
On cross-examination, however, Mr. Markell stepped back from his differentiation
of “plant” and “project.” Mr. Markell was asked to discuss the definition of “plant” and
“balance of plant” with regards to other types of energy facilities, not just fuel cells. Mr.
Markell testified that although a hydropower project may have numerous suppliers and
systems, there is just one hydropower “plant.” Additionally, with nuclear power plants,
66
although there would be multiple systems involved, Mr. Markell testified that it would be
defined as one “plant,” as long as they are owned by the same party. Regarding a coal-
fired power plant, Mr. Markell stated that the “scrubber unit,” 32 a unit similar in function
to gas conditioning equipment, would be part of the coal plant “balance of plant,” not
balance of project. Mr. Markell then admitted at trial that “project” is sometimes used
interchangeably in the industry with the term “plant.” He also testified that “systems,”
and “facility” can sometimes be used interchangeably with “project” and “plant” as well.
In addition, defendant’s expert, Mr. Markell, appears to have contradicted
himself in his usage of plant and project between his expert report and trial testimony. In
his expert report, Mr. Markell stated that the “power plant and the gas condition system
are two separate discrete systems or two separate ‘Plants.’” Mr. Markell however, later
testified at trial:
Q. Are you providing the opinion that there’s more than one plant in
the projects here in this case?
A. I am not, no. You have the fuel cell power plant, so you have one
plant, one project.
When approached on this at cross-examination, he stated: “Actually, it looks like I was
mistaken, but ‘Plants’ being in quotes is -- just means it’s kind of a general term.” In
opposition to Mr. Markell’s testimony, Mr. Wason testified that he was not aware of any
industry definition that would refer to the digester gas condition equipment and the fuel
cell assembly as two separate plants, or projects.
Mr. Markell, defendant’s expert, also discussed the FuelCell Energy fuel cell
contracts, which defendant alleges define “balance of plant” as not including gas
conditioning equipment. In Mr. Markell’s expert report, he stated:
Based on the terminology used by FCE to define the fuel cell power plant
in their sales agreements, it is my engineering interpretation that “Plant”
for the Projects only includes the equipment provided by FCE. Therefore,
it is my opinion that the gas conditioning equipment would not be included
in the BOP [balance of plant], since it is not provided by FCE and would
not be considered part of the “Plant.”
32 Although “scrubber unit” is not defined by the parties or in the record, the United
States Energy Information Administration “GLOSSARY” states: “Flue gas
desulfurization: Equipment used to remove sulfur oxides from the combustion gases
of a boiler plant before discharge to the atmosphere. Also referred to as scrubbers.
Chemicals such as lime are used as scrubbing media.” See F, Glossary, U.S. Energy
Info. Admin., http://www.eia.gov/tools/glossary/index.cfm?id=F (last visited March 31,
2015).
67
The definition of “Balance of Plant” in the FuelCell Energy sales and service
contract is: “all components of the Plant other than the Fuel Cell Module, as specified by
Seller from time to time in its DFC Specifications.” (emphasis in original). “Plant” is
separately defined in the same document as “A carbonate-based fuel cell power plant
utilizing Seller’s Direct FuelCell® technology.” At trial, plaintiffs’ witness from FuelCell
Energy, Mr. Leo, suggested that the FuelCell Energy contracts definition of “balance of
plant” does not include gas conditioning equipment. Mr. Leo testified that the word
“Plant” in the FuelCell Energy contract refers to “[j]ust our scope of supply,” which does
not include gas conditioning equipment. Plaintiffs argue that the term, “balance of plant”
from the FuelCell Energy contracts does not represent the “balance of plant” for the fuel
cell power plant as a whole, but instead covered a more limited “scope of supply”
related to the FuelCell Energy sales and service contracts and that company’s
responsibilities. Plaintiffs argue that the FuelCell Energy sales and service contracts
relate to delivery of one piece of equipment for the fuel cell power plant, the fuel cell
assembly, and must be viewed in that light.
The record before the court would appear to support plaintiffs’ contention that the
term “balance of plant,” as used in the FuelCell Energy contracts, specifically refers to
the contracts between FuelCell Energy and RP1 and SJ-1, and does not define
“balance of plant” as the phrase is to be understood pursuant to I.R.C. § 48(c)(1)(C). Mr.
Sharma, from Anaergia, testified at trial that he understood the term “balance of plant”
as used in the FuelCell Energy contracts to relate “to their scope of services in their
power plant,” and affirmed that the definition of “balance of plant” in those same
contracts was “not intended by the parties to limit the full scope of what is a fuel cell
power plant.”33 (emphasis in original). Plaintiffs’ witness, Mr. Sharma, testified that,
when referring to the warranty provided by FuelCell Energy, the warranty only covered
the equipment the company, FuelCell Energy, provided, and not equipment supplied by
other contractors, such as the gas conditioning equipment, which was supplied by ESC
Corporation. This comment, however, appears not to have been offered regarding the
definition of “balance of plant,” but rather with respect to warranty coverage. Mr. Leo,
from FuelCell Energy, also commented that any references in the FuelCell Energy
contracts to “balance of plant,” refer to the FuelCell Energy standard scope of supply.
Mr. Leo added that any references to “plant” in the FuelCell Energy sales and service
contracts refer to merely a “subset of the full plant.”34
33 Mr. Sharma also testified that he understood the scope of service in the FuelCell
Energy services contract to be “[a]pproximately” similar to the scope of supply from the
sales contract.
34 Mr. Leo further indicated at trial that even though the gas conditioning equipment was
provided by a separate supplier, ESC Corporation, and not in FuelCell Energy’s “scope
of supply” for the RP1 and SJ-1 contracts, FuelCell Energy’s fuel cells for the RP1 and
SJ-1 project were nonetheless still tailored to operate on anaerobic digester gas, and
therefore considered and relied on the gas conditioning equipment provided by ESC
Corporation. Mr. Leo added that FuelCell Energy has “standard options that are tailored
68
In addition, both Mr. Leo and Mr. Sharma indicated at trial that, had the
contractual circumstances been different between RP1, SJ-1 and FuelCell Energy, the
gas conditioning equipment could have fallen within the “scope of supply” and “balance
of plant” of the FuelCell Energy sales and service contracts. Mr. Sharma testified at trial
that FuelCell Energy could supply and service the gas conditioning equipment for either
the RP1 or SJ-1 projects, if it was preferred. Mr. Sharma stated:
FuelCell Energy could have supplied the entire power plant or serviced the
entire equipment. And in fact, we’ve had discussions with FuelCell Energy
on several -- several times if they would take over servicing of the entire
power plant. That would include the gas conditioning equipment and
balance of plant, which they’re not servicing right now.
Mr. Leo further testified that, if requested, “[w]e offer to provide a complete either
equipment supply or turnkey for digester gas,” and in such situations, “[w]e would
provide the gas cleanup equipment [gas conditioning equipment].” Mr. Leo also stated
that even if another supplier, instead of FuelCell energy were to provide the gas
conditioning equipment, in a turnkey project, “[i]n fact, we would integrate it with the
plant exactly the same way we would integrate one provided by us.”
In apparent agreement with plaintiffs’ witnesses, Mr. Markell, defendant’s expert
witness, admitted at trial that his understanding of whether or not “balance of plant”
would cover gas conditioning equipment could vary based on what was included in the
FuelCell Energy contract. Mr. Markell testified, for example, that if FuelCell Energy and
RP1 engaged in “an EPC [engineering, procurement, and construction] contract, then it
may be different because that would change the overall function in the boundaries and
most likely the fuel specification going into the project.” He added:
With an EPC contractor, if they’re doing the entire project, then they’re
going to take responsibility of the biogas right as it leaves the digesters,
and they will set the fuel definition as of that point when it comes out of the
digesters, so in that sense it would redefine what the fuel cell power plant
is.
Mr. Markell further testified that “[i]f they have a single EPC contractor, which in this
case would have to be FuelCell Energy, they could in turn change the fuel specification
to be raw biogas. At that point in time, it would redefine ‘plant’” to be more inclusive. Mr.
Markell repeated, “I mean, FuelCell Energy, the way they did define ‘fuel cell power
plant,’ it really ties back to the equipment that they are providing.” As plaintiffs note,
however, “Congress could not have intended for a fuel cell power plant and all of the
associated equipment to qualify if constructed under a single contract, but components
toward digester gas.” Mr. Leo explained that these standard options included a
“deoxidizer option,” as well as a “fuel train that allows dual-fuel operation.”
69
in a physically identical plant would not qualify if constructed under more than one
contract.”
A review of the record also indicates inconsistencies in the government’s
argument. On the one hand, the government argues that the term “balance of plant”
should be understood to match what was provided in the FuelCell Energy sales and
service contracts. Multiple components of the RP1 and SJ-1 fuel cell facilities were not
sourced by FuelCell Energy, and, therefore, under that definition, would not fall in
FuelCell Energy’s contractually-defined “Balance of Plant.” Yet some of those not
FuelCell Energy provided components were considered by the government to be part of
the “balance of plant” in its evaluation of plaintiffs’ grant application. For example, Mr.
Leo, from FuelCell Energy, testified that the “AC power” and “foundations,” for a
FuelCell Energy fuel cell, which are included in the government’s definition of “balance
of plant,” “aren’t provided by us unless we’re doing a turnkey.” Mr. Markell, defendant’s
expert witness, also testified that the “foundations” and “pads” on which the FuelCell
Energy fuel cell sit would count as “balance of plant,” “[b]ecause that equipment would
basically provide the support necessary for the fuel cell power plant,” even though
those items were not provided by FuelCell Energy nor in its standard “scope of
supply.” 35
The power purchase agreements between RP1 and the IEUA, and SJ-1 and San
Jose appear to the court more relevant to the court’s understanding of “balance of
plant,” as applied to the RP1 and SJ-1 projects. Unlike the FuelCell Energy contracts,
the power purchase agreements govern the design and use of the overall fuel cell
facilities, not just a single subset of components. The power purchase agreement
between RP1 and the IEUA was for a “fuel cell facility,” consisting of a “Fuel Cell power
plant and ancillary equipment, as further described in the body of this Agreement and
35 Defendant also argues that “[e]very time FCE refers to the projects or its products
outside of the context of this litigation, it refers to the equipment it supplies as the ‘fuel
cell power plant.’ Its brochures, specifications, and informational materials repeatedly
refer to it that way.” Defendant states: “Thus, according to the manufacturer itself, the
‘fuel cell power plant’ is its fuel cell equipment, and the balance of plant is everything it
provides related to the fuel cell module. It does not, however, include the separate gas
conditioning system provided by ESC.” Mr. Leo admitted at trial “that in the documents
provided by FuelCell Energy it’s common for you to refer to your equipment as a fuel
cell power plant.” While it is true that, occasionally, FuelCell Energy documents
sometimes refer to their components, or the fuel cell modules specifically, as the “plant,”
“Power Systems,” “Power plant system,” or “power plant,” a review of the record
indicates that FuelCell Energy was not consistent overall in the naming schemes
included in its technical and marketing publications. Regardless, just as with the
FuelCell Energy sales and service contracts, the other technical and marketing
materials in the record appear limited to the “scope of supply” traditionally offered by
FuelCell Energy, and do not inform the statutory definition of “fuel cell power plant” or
“balance of plant” in I.R.C. § 48(c)(1)(C), which is at issue in this case.
70
Exhibit B and Exhibit D, providing a total gross electrical generating capacity of
approximately 2.8 megawatts.” (emphasis in original). Exhibit B, “FACILITY
EQUIPMENT SPECIFICATIONS,” discussed the fuel cell system’s technical
requirements, and included a requirement for a “Gas Cleaning System.”36 (capitalization
and emphasis in original). Under Exhibit D, Part B, “SCOPE OF WORK,” (capitalization
in original), the following was included:
The Seller shall include in the scope of work all necessary work, labor,
taxes, services, equipment, appurtenances, and incidentals necessary to
produce a fully functional and operational 2.8 MWac fuel cell system,
including a fuel cleaning system for the available quality of digester gas,
4.1 million BTH heat recovery system for use by the Purchaser, and
include the interconnection to the main utility service.
The SJ-1 power purchase agreement also required UTS BioEnergy, when creating the
SJ-1 facility, to provide and install gas conditioning equipment. The power purchase
agreement stated, under, “GENERAL DESIGN CRITERIA:” “The Fuel Cell System shall
be fed digester gas. The Fuel Cell System shall include fuel conditioning and cleaning
system.” (capitalization and emphasis in original).
Moreover, in response to defendant’s argument that the FuelCell Energy
contracts define “balance of plant” narrowly, plaintiffs contend that industry standards
have broadly defined the phrase. According to plaintiffs:
[T]wo national codes for the fuel cell industry treat gas conditioning
equipment as part of the fuel cell power plant—the ‘ASME PTC-50-2002,
Fuel Cell Power Systems Performance’ (PTC-50) performance test codes
published by the American Society of Mechanical Engineers (ASME)
[ASME standard] and the ‘NFPA 853, Standard for the Installation of
Stationary Fuel Cell Power Systems’ (NFPA 853) published by the
National Fire Protection Association (NFPA) [NFPA Standard].
Plaintiffs further assert that the IRS specifically references the ASME standard in IRS
Notice 2008-68, Energy Credit for Qualified Fuel Cell Property and Qualified
Microturbine Property, 2008 WL 3888278 (Aug. 28, 2008), and that defendant’s NREL
witness, “Mr. Settle, who had previously reviewed this IRS Notice but had forgotten
about it, accepted that the IRS considers the PTC-50 to be relevant to fuel cell power
plants under Code § 48(c)(1).” Plaintiffs also allege that FuelCell Energy’s own
publications reference the NFPA standard, and that the standard states: “Additional fuel
gas cleanup equipment shall be considered part of the associated equipment” for a fuel
cell power plant. At trial, Mr. Wason, plaintiffs’ expert witness, pointed to the standards
from the “National Fire Protection Association” and “American Society of Mechanical
Engineers,” and indicated they “specifically say for a biogas fuel cell power plant, the
36The parties agreed that gas cleaning system is the same as gas conditioning
equipment.
71
gas conditioning equipment is part of the fuel cell power plant.” Plaintiffs also note that
other documents in the record lend an expansive interpretation of the phrase “balance
of plant,” and contend, as an example, that the California Self-Generation Incentive
Program handbook “specifically defines eligible project costs to include costs for gas
conditioning equipment.”
At trial, plaintiffs introduced as an exhibit the American Society of Mechanical
Engineers Performance Test Code 50-2002, titled “FUEL CELL POWER SYSTEMS
PERFORMANCE,” (capitalization and emphasis in original) (ASME Standard), which
was accepted without objection into the record. The ASME standard discusses the
contents of a “generic fuel cell power system,” and includes as a typical component:
Fuel Processing. Involves a variety of processes, depending on the fuel
cell types. If the fuel cell is running on bottled hydrogen, fuel processing is
minimal. Typically a fuel cell power system will be run on common
hydrocarbon fuels, such as natural gas. Fuel processing usually involves
cleaning to remove possible fuel cell poisons (e.g., sulfur compounds used
in natural gas odorants). It can include reforming of the gas to produce
hydrogen (in “externally reformed” systems) or this function can occur
inside the stacks in some types of fuel cells. The fuel processor may also
include other equipment, such as shift reactors, CO oxidizer reactors,
higher hydrocarbon removal, etc.
(emphasis in original). Mr. Settle, from NREL, also agreed at trial that the standard’s
definition of a fuel cell system includes “cleaning equipment for the fuel.” The ASME
standard defined “balance of plant” as follows: “Balance of Plant (BOP). Used to refer to
all components in a fuel cell power system besides the electrochemical fuel cell stacks.
The BOP can include fuel processing equipment, heat recovery equipment, power
conversion equipment, control equipment, etc.” (emphasis in original). Mr. Settle
testified for defendant at trial, however, that he viewed “fuel processing equipment” to
mean only those “certain things that are customary for the fuel cell power plant, such as
the desulfurization unit, filtration, and so forth. I would view that as what’s referred to
here as fuel processing equipment.” Although Mr. Settle appeared to indicate from his
testimony that “fuel processing equipment” under the ASME standard would not include
gas conditioning equipment for anaerobic digester biogas, “[f]uel [p]rocessing” is defined
in the same ASME standard to cover not only natural gas, but also other fuels, such as
hydrogen, suggesting that “fuel processing equipment” would refer to equipment to
process, and clean, multiple types of fuels.
Plaintiffs place specific emphasis on the ASME standard. Defendant’s witness,
Mr. Settle from NREL, who was not qualified as an expert witness, but who was
involved in the Section 1603 grant review and evaluation process, stated that the ASME
standard “is one of the standards that the industry would rely on,” and acknowledged at
trial that the IRS considers the standard relevant. Plaintiffs also note that the ASME
committee that developed the PTC-50 included Mr. Leo as its Chair along with various
other representatives from the fuel cell industry, the United States Department of
72
Energy, the United States Army Corps of Engineers, and two Government-owned
laboratories (Argonne National Laboratory and National Energy Technology
Laboratory). As noted above, plaintiffs pointed to IRS Notice 2008-68, Energy Credit for
Qualified Fuel Cell Property and Qualified Microturbine Property, 2008 WL 3888278
(Aug. 28, 2008). Plaintiffs note that the IRS specifically references the ASME standard
in this notice under “SECTION 5. RULES RELATING TO THE AVAILABILITY OF THE
FUEL CELL CREDIT,” which states: “The electricity-only generation efficiency of a fuel
cell power plant may be determined in accordance with the standards of ANSI/ASME
PTC 50-2002 Fuel Cell Power Systems Performance or equivalent testing procedures
under normal operating conditions using the lower heating value of the primary fuel.”
Defendant tries to minimize the importance of the ASME standard, stating that
the standard, “PTC-50 Is Not Relevant.” (emphasis in original). Defendant states “[w]hile
plaintiffs tout that the IRS considers PTC-50 to be relevant, its only relevance IRS [sic]
was to set out the standards for efficiency testing, not to influence the statutory
definition of a fuel cell power plant.” Mr. Settle from NREL also testified that the subject
of the IRS Notice regarding the ASME standard has to do with “generation efficiency,”
not about whether gas conditioning equipment is part of a fuel cell power plant.
Defendant adds that “[i]t is notable that plaintiffs did not solicit any testimony about
PTC-50 [ASME standard] from Mr. Leo, despite touting him as the chair of the
committee in their brief.” Defendant argues that since Mr. Leo, from FuelCell Energy,
and Mr. Wason, from Anaergia, did not focus on the standard, “[c]learly, their own
witnesses do not ascribe much weight to the test code.” On cross-examination by
plaintiff, Mr. Markell, defendant’s expert witness, testified that prior to this case, he had
not used the ASME standard, but he has reviewed other similar standards. Mr. Markell
stated that he did not rely on the ASME standard in his analysis because it did not have
a definition of “plant.” He explained that the test code merely “sets up the ground rules
on how you run your test. But prior to running your test you do what’s called a test
protocol, and that will really set the boundaries of what is included in your -- the plant
that you’re testing.” He indicated that the “test engineer” decides what to include on a
given test and that, typically, the test engineer works for the developer.
Although the parties focus less on the NFPA standard, the 2010 version of the
NFPA standard, titled “NFPA® 853 Standard for the Installation of Stationary Fuel Cell
Power Systems,” defines “Biogas Fuel Cell System” as “[a] fuel cell system comprised
of a conventional biogas source, such as a landfill gas site or municipal sewage digester
site, a fuel cell specific gas cleanup unit, and a prepackaged or matched modular fuel
cell power system.” NFPA Standard, at 853-6 (emphasis in original). Multiple industry
sources indicate that the “balance of plant” of a fuel cell power plant specifically includes
anaerobic digester biogas gas conditioning equipment. Based on the record before the
court, plaintiff’s position that “balance of plant” should not be limited to a specific subset
of components of the RP1 or SJ-1 fuel cell facilities, such as only the components
supplied by FuelCell Energy, is supported.
Defendant, next, argues that underlying plaintiffs’ alleged definition of “balance of
plant” for a “fuel cell power plant” under I.R.C. § 48(c)(1)(C), is an assertion that “fuel
73
cell power plant” should be defined keeping in mind the intended use of the power plant
and those components necessary to support its intended use, which, in this case, would
be to operate with anaerobic digester biogas as the primary fuel. Defendant maintains
that plaintiffs’ arguments relating to “necessity” or “intended use” are “simply beside the
point. The statute contains no reference to the intended purpose of a project or even to
alleged contractual necessity.” Defendant asserts that, instead, the statute, I.R.C. §
48(c)(1)(C) defines “fuel cell power plant” narrowly, to include only those components
required for the fuel cell power plant to operate at a basic level, on natural gas, without
consideration for what is necessary for the fuel cell power plant to operate as
contractually intended. Defendant states: “To permit them to define the statute based on
their intended use at a particular project would allow each individual applicant (or
taxpayer, in the energy credit context) to redefine the statute based on their own
particular set of circumstances.”
Defendant, speaking specifically about the RP1 and SJ-1 projects, states that
“[t]he evidence is clear that the projects’ fuel cells can and do operate on natural gas,
which bypasses the external gas conditioning system.” Defendant adds: “the RP1 and
SJ-1 fuel cell power plants start up on natural gas, and they run on natural gas
whenever the gas conditioning is not functioning, when the biogas quality from the
digesters is too low, or when there is insufficient biogas.” Defendant argues that, thus,
because the RP1 and SJ-1 fuel cell facilities can technically run on natural gas, the
Section 1603 grant should only cover as “balance of plant” those components that
contribute to the operation of the fuel cell facilities on natural gas, and not those
components that facilitate their operation on alternative fuels, such as anaerobic
digester biogas. In support, defendant brings to the court’s attention the “Property
Placed in Service” date for the RP1 project included in its Section 1603 grant
application, and points to “the fact that the RP1 project came online on September 11,
2012, utilizing natural gas, a full two months before it began generating electricity from
digester gas on November 9, 2012.”37 (emphasis in original). Defendant contends that
because plaintiffs claimed the earlier “Property Placed in Service” date for the RP1
project of September 11, 2012 on their Section 1603 application, this demonstrates “that
plaintiffs themselves considered the fuel cell operational when it was running solely on
natural gas.” (emphasis in original).
Plaintiffs reply that “the ‘intended use’ of ITC [Investment Tax Credit] property is
critical for determining whether property is an ‘integrated unit of property,’ is an ‘integral
part’ of a qualifying activity, and has been placed in service.” Regarding “balance of
plant,” plaintiffs state:
Witnesses for both sides accepted that the fuel cell plants were
contractually and economically required to run on the digester gas and
37 Unlike the RP1 facility, the record indicates that the SJ-1 facility “began commercial
operations” with natural gas and anaerobic digester gas on June 15, 2012, and did not
previously start operations with natural gas. On its Section 1603 application, SJ-1 also
listed its “Property Placed in Service” date as June 15, 2012.
74
that this was the intended use and the primary purpose of the Projects. It
also is indisputable that the gas conditioning equipment is essential for
this intended use and must be included as balance of plant for the fuel cell
power plant.
(internal citations omitted). Plaintiffs point to a number of cases issued by the United
States Tax Court, Noell v. Commissioner, 66 T.C. 718 (1976), acq. in part, 1977-2 C.B.
1, 1977 WL 185621 (Dec. 31, 1977), Valley Natural Fuels v. Commissioner, T.C. Memo.
1991-341, 1991 WL 135497 (July 25, 1991), aff’d, 990 F.2d 1266 (9th Cir. 1993), and
85 Gorgonio Wind Generating Co. v. Commissioner, T.C. Memo. 1994-544, 1994 WL
591909 (Oct. 31, 1994), for the proposition that “ITC [I.R.C. § 48(c)(1)(C)] case law
demonstrates the importance of the intended use of the property and the irrelevant
aspect of initial or intermittent use of the property for another purpose (here, initial
operation on natural gas).”
As to defendant’s allegation that the RP1 project was “Placed in Service” only
on natural gas before operating with any anaerobic digester biogas, plaintiffs argue:
“The problem with Mr. Settle’s testimony is that he has confused the separate
‘commissioning’ of the fuel cell equipment on two different fuel sources with the
commissioning of the gas conditioning equipment.” Plaintiffs add that “[a]s Mr. Leo
explained, the only reason that the fuel cell equipment is ‘commissioned’ separately on
natural gas and digester gas is to verify the dual-fuel operation.” Plaintiffs also contend
that, for the RP1 project, “[t]he fuel cell equipment and gas conditioning equipment were
in a state of operations (even if not operating in a synchronization) on September 11,
2012, and were accordingly placed into service for tax purposes.” Plaintiffs also
maintain:
Hypothetically, even if the gas conditioning equipment was not “in a state
of readiness and availability” on September 11, 2012, all this proves is that
UTS incorrectly reported the placed-in-service date on its grant
application. That is, the fuel cell power plant was not ready and available
for its specifically assigned function—to operate on digester gas—before
the gas conditioning equipment was operational. And, even if the fuel cell
equipment was somehow placed in service separately from the gas
conditioning equipment, it would not disqualify the gas conditioning
equipment from a Section 1603 grant.
The record indicates that the intended purpose of both the RP1 and SJ-1
facilities was to operate using anaerobic digester biogas. The request for proposal for
the RP1 project stated: “[t]he purpose of the proposed fuel cell construction is to replace
the current power generation system at RP1 and utilize digester gas as the primary fuel
supply.” The RP1 power purchase agreement with the IEUA stated that the “SCOPE OF
WORK,” (capitalization in original), was for an “energy efficient fuel cell system that will
maximize the use of digester gas and increase the renewable energy resource potential
at the delivery point.” The RP1 power purchase agreement further stated that the RP1
fuel cell facility “requires a regular minimum operating ratio of 75% digester gas and
75
25% natural gas.” The parties have stipulated that the RP1 facility planned, at a
minimum, to operate on 75% anaerobic digester gas. The request for proposal for the
SJ-1 system asked for a fuel cell system “to be operated on plant digester gas,” and
indicated that the SJ-1 facility would run on one hundred percent anaerobic digester
gas. A report from the San Jose Water Pollution Control Plant states that the “City of
San José seeks out partnerships with innovative firms to convert solid waste and
biosolids—such as those produced by the Plant’s treatment process—into biodiesel,
methanol, biogas, and electricity that will someday power municipal operations as well
as be available to other users.” The parties also stipulated that the SJ-1 facility planned,
at a minimum, to operate on 75% anaerobic digester gas. Moreover, Mr. Wason,
plaintiff’s expert witness, testified at trial that operation of the SJ-1 fuel cell facility on
natural gas is not practical “because the contract between Anaergia and City of San
Jose is based on a hundred percent digester gas. . . . but if the problem is due to
something went wrong in the gas conditioning equipment and now a gas coming out is
not clean enough, now, if you use natural gas, Anaergia would have to pay for it.” Mr.
Wason added that even if the RP1 or SJ-1 facilities were within their “uptime”
requirements, they would still not choose to operate on natural gas if digester gas was
unavailable, and would rather shut down: “You will not run it on natural gas because the
cost for the natural gas and the O&M [operations and maintenance] cost is higher than
what they have, you know, agreed to charge the city for the electricity.”
Whether a facility’s “intended use” or purpose is relevant to interpretation of
Section 1603 and I.R.C. § 48, begins with the words of the statutes. Section 1603
awards a grant to “[a]ny qualified fuel cell property (as defined in section 48(c)(1) of
such Code).” See Section 1603(d)(2). I.R.C § 48(c)(1)(C) defines a fuel cell power plant
as “an integrated system comprised of a fuel cell stack assembly and associated
balance of plant components which converts a fuel into electricity using electrochemical
means,” but does not further clarify whether this definition considers the intended use of
the fuel cell facility, or some other standard. See id.
The court also examines neighboring provisions of the Internal Revenue Code
related to the Investment Tax Credit program for guidance, and, in particular, Subpart E,
“Rules for Computing Investment Credit,” IRC §§ 46–50. 38 As defendant indicates in its
briefs, when determining whether or not I.R.C. § 48, “Energy credit,” should be
interpreted keeping the intended use of a property in mind, a neighboring provision of
the Internal Revenue Code, I.R.C. § 46, “Amount of credit,” is instructive. Although
I.R.C. § 48 determines what types of facilities are eligible for an investment tax credit,
I.R.C. § 46 determines the “Amount of credit” that a specific facility should get, based on
a number of factors. The regulations promulgated under I.R.C. § 46, Treas. Reg.
38 Earlier in the same section of the Internal Revenue Code, I.R.C. § 48, the general
term “Energy property” is defined to include a “qualified fuel cell property,” “which is
acquired by the taxpayer if the original use of such property commences with the
taxpayer.” See I.R.C. § 48(a)(3)(A)(iv), (B)(ii). This might suggest that an energy
property, such as a qualified fuel cell property, could be defined in relation to its “original
use,” or “intended use.” See id.
76
§§ 1.46 et seq., explain how to determine the amount awarded for an investment tax
credit, see Treas. Reg. § 1.46-1, “Determination of amount,” as well as what is a part of
the qualified cost basis for the investment tax credit, see, e.g., Treas. Reg. §§ 1.46-3,
“Qualified investment,” and 1.46-5, “Qualified progress expenditures.” A review of the
regulations supports the conclusion that I.R.C. §§ 46 and 48 are related; while I.R.C.
§ 48, “Energy credit,” defines broadly which facilities are eligible for an investment tax
credit, I.R.C. § 46, “Amount of credit,” and its accompanying regulations, clarify which
components of the facility fall within the ambit covered by the tax credit, depending, for
example, on when the individual components were “Placed in service.” See Treas. Reg.
§ 1.46-3(d) (emphasis in original). Defendant actually links the two concepts together
when it argues that I.R.C. § 48, “Energy credit,” should not be interpreted to cover
“intended use” of an energy property, and offers as support for its position the allegation
that the RP1 facility was placed into service when it was operating only on natural gas.
“Placed in service,” however, is defined under the Treasury Regulations pursuant to
I.R.C. § 46, “Amount of credit.”
Plaintiffs in their brief point to Treasury Regulation § 1.46-5, “Qualified progress
expenditures,” which states:
Property is part of an integrated unit only if the operation of that item is
essential to the performance of the function to which the unit is assigned.
Property essential to the performance of the function to which the unit is
assigned includes property the use of which is significantly connected to
that function and which effects the safe, proper, or efficient performance of
the unit.
Treas. Reg. § 1.46-5(e)(3)(ii). Plaintiffs argue that “[t]his [Treasury] regulatory definition
subsumes what would normally be treated as ‘balance of plant.’ This definition matches
almost perfectly with the opinion of mechanical engineer Sarwan Wason, who
concluded that gas conditioning equipment is an ‘essential’ and ‘necessary’ part of the
fuel cell power plants at issue.”
Defendant urges the court not to rely on Treasury Regulation § 1.46-5, because
it:
is based on a repealed statute. Under former § 46(d), a taxpayer could
elect to take an investment tax credit (ITC) for so-called “qualified
progress expenditures,” amounts paid toward the construction of
otherwise qualifying ITC property that had a “normal construction period”
exceeding two years. Treas. Reg. § 1.46-5(d). For property placed in
service separately, this period was determined separately, unless such
property comprises an “integrated unit.” Treas. Reg. § 1.46-5(e)(3)(i).
Defendant argues the statute was repealed in 1990 “as part of the Tax Reform Act of
1986, which added § 49 to sunset the ITC provisions.” Even if the underlying statute
was sunset, however, the provision of Treasury Regulation § 1.46-5(e)(3)(ii) was not
77
struck by the agency and remains in effect. Regardless, the court is not relying on
Treasury Regulation § 1.46-5(e)(3)(ii) as definitive guidance, but, instead, as part of its
examination of section 48 of the Internal Revenue Code.
Plaintiffs in their briefs also point to Treasury Regulation § 1.46-3, “Qualified
investment,” in which “Placed in service,” (emphasis in original), is defined as:
(d) Placed in service. (1) For purposes of the credit allowed by section 38,
property shall be considered placed in service in the earlier of the
following taxable years:
(i) The taxable year in which, under the taxpayer’s depreciation
practice, the period for depreciation with respect to such property
begins; or
(ii) The taxable year in which the property is placed in a condition or
state of readiness and availability for a specifically assigned
function, whether in a trade or business, in the production of
income, in a tax-exempt activity, or in a personal activity.
Thus, if property meets the conditions of subdivision (ii) of this
subparagraph in a taxable year, it shall be considered placed in
service in such year notwithstanding that the period for depreciation
with respect to such property begins in a succeeding taxable year
because, for example, under the taxpayer’s depreciation practice
such property is accounted for in a multiple asset account and
depreciation is computed under an “averaging convention” (see §
1.167(a)–10), or depreciation with respect to such property is
computed under the completed contract method, the unit of
production method, or the retirement method.
Treas. Reg. § 1.46-3(d)(1). Of importance is the limitation, “property shall be considered
placed in service in . . . . [t]he taxable year in which the property is placed in a condition
or state of readiness and availability for a specifically assigned function.” Id.; see also
8 Mertens Law of Fed. Income Tax’n § 32A:8.30 (2015), available at Westlaw.
(“Generally, a property is placed in service when it is placed in a condition or state of
readiness and availability for a specifically assigned function.” (citing Treas. Reg. §
1.46-3(d)(1)(ii))); IRS Tech. Advice Memo. 201113025, 2011 WL 1210325, at *1 (Apr. 1,
2011) (discussing the “placed in service” rule under Treas. Reg. § 1.46-3(d), and noting
that to be placed in service, “a facility must be ready and available to produce on a
sustained and reliable basis in commercial quantities.”); see also Consumers Power Co.
v. Comm’r, 89 T.C. 724 (“The regulations provide that property will be regarded as
placed in service when it is ‘placed in a condition or state of readiness and availability
for a specifically assigned function.’” (citing Treas. Reg. § 1.46-3(d)(1)(ii))). Moreover, in
an IRS Technical Advice Memorandum, Treasury clarified that:
78
In order to determine when a facility has reached a condition or state of
readiness and availability for a specifically assigned function, all facts and
circumstances must be considered. The Service has generally looked to a
number of factors to determine when a facility is in a condition or state of
readiness and availability for a specifically assigned function. They are:
(1) approval of required licenses and permits;
(2) passage of control of the facility to taxpayer;
(3) completion of critical tests; and
(4) commencement of daily or regular operation.
These factors are not exclusive - they are used as guideposts to
determine whether, looking at the totality of the facts and circumstances, a
facility has been placed in service.
IRS Tech. Advice Memo. 201113025, at *1 (citing IRS Rev. Rul. 84-85, 1984 WL
262650 (June 18, 1984); IRS Rev. Rul. 76-526, 1976 WL 36215 (Jan. 1, 1976); IRS
Rev. Rul. 76-428, 1976 WL 36179 (Jan. 1, 1976)).
Although decisions by judges of the United States Tax Court are not binding on
this court, the court gives their interpretations, including those regarding an investment
tax credit statute such as I.R.C. § 48, “Energy Credit,” and its related section I.R.C. §
46, “Amount of credit,” due consideration. A review of United States Tax Court decisions
supports plaintiffs’ view that the intended, contracted-for use of the property should be
considered when determining whether a project is “Placed in service,” (emphasis in
original), under Treasury Regulation 1.46-3(d), and, furthermore, that the intended use
of a property is relevant to application of Internal Revenue Code requirements. In Noell
v. Commissioner, at issue “with respect to petitioner’s claim for an investment credit is
whether the main runway and two taxiways were placed in service in 1968.” Noell v.
Comm’r, 66 T.C. 728. In Noell, the IRS was arguing that the runway was in place one
year earlier, in 1967, “since airplanes began to use the runway after the rock was laid in
place in 1967.” Id. The Noell court concluded that “[t]he rock surface on which some
planes landed in 1967 was clearly only a stage in the construction of the facility,” and
added: “In short, the facility was simply not available for full service until the runway was
paved in 1968. We therefore hold that the landing facilities were not placed in service
until that year.” Id. at 728–29. Although the Noell court’s analysis related specifically to
Treasury Regulation § 1.46-3(d), which discusses a property’s “Placed in service” date,
the case is instructive as to whether the Internal Revenue Code looks to “intended”
versus “actual” use of a property in determining appropriateness for receipt of the
investment tax credit. See Treas. Reg. § 1.46-3(d) (emphasis in original); Noell v.
Comm’r, 66 T.C. 728.
In Valley Natural Fuels v. Commissioner, the United States Tax Court also
addressed whether a facility was placed in service at the time of its full, intended use, or
at the time when it started operations at some basic level. See Valley Natural Fuels v.
Comm’r, 1991 WL 135497. In Valley Natural Fuels, the circumstances were somewhat
79
reversed from Noell, as petitioner contended that its facility was placed in service earlier
than the IRS contended, so that it could receive an investment tax credit that would
otherwise have expired:
Petitioner’s position is that the facility was placed in service on December
30, 1983. Petitioner contends that the assigned function of the facility was
to produce a “warranted QUANTITY” of “commercially marketable ethanol,
whether such ethanol was 198.2 proof, 190 proof or 150 proof” and that,
as of December 30, 1983, the facility was capable of performing this
function.
See id. The IRS had concluded “that the facility was not placed in service until June
1985 because” only by then was the facility able to produce the highest grade of
“ethanol at 198.2+ proof for purposes of blending with gasoline to make gasohol.” Id.
The United States Tax Court agreed with the IRS position, that the later, 1985 date was
appropriate:
We similarly conclude that the ethanol still, which was constructed in
1983, the molecular sieve, which was installed in 1984, and the additional
equipment, which was installed in 1985, were component assets of the
facility and “functionally formed a single property.” Only after all of these
component assets were installed and functioning did the facility constitute
a complete unit that was operational and served the purpose intended by
petitioner, to wit, the production of 198.2 proof ethanol.
Id. The court in Valley Natural Fuels, a case often referred to in subsequent tax court
cases, reviewed a number of United States Tax Court decisions offered by petitioner in
that case for the proposition that earlier, intermittent use of a property for a purpose less
than the full, intended purpose, would still allow the facility to qualify for an investment
tax credit with the earlier placed in service date. In reviewing the decisions, the Valley
Natural Fuels court stated:
The property at issue in each of those cases was in a state of readiness
and availability to perform its assigned function, although not actually used
by the taxpayer during the year in issue due to circumstances beyond the
control of the taxpayer. The facts in those cases are distinguishable from
the facts in the instant case, where operations were not at or near the
intended level of production.
See id.
In 85 Gorgonio Wind Generating Co. v. Commissioner, the United States Tax
Court again concluded that operation of two wind turbines at less than intended use
prevented them from being placed in service for the purpose of a business tax credit.
See 85 Gorgonio Wind Generating Co. v. Comm’r, 1994 WL 591909, at *6, *10. The
Gorgonio court concluded:
80
Operation of the Dynergy 180 wind turbines without controllers was
theoretically possible, at least for short periods of time, but would be less
cost effective and potentially more hazardous than operation with the
automatic controllers designed for use on the wind turbines.
...
In sum, the partnership’s two wind turbines were simply not available for
production of electricity on a regular, ongoing basis in the condition in
which they existed in 1985. Since neither of the partnership’s wind turbine
generators were available for full service on or before December 31, 1985,
we hold that they were not placed in service in that year.
Id. at *9; see also Armstrong World Indus., Inc., & Affiliated Cos. v. Comm’r, T.C. Memo.
1991-326 (Tax Court, 1991) (determining that “[t]he applicable authorities are consistent
in their analysis of placed in service where the completion of a component is integral to
the availability and readiness of a project as a whole for its specifically assigned
function”), aff’d, 974 F.2d 422 (3d Cir. 1992). In 85 Gorgonio Wind Generating Co. v.
Commissioner, the government had argued that under I.R.C. § 46 the business tax
credit should only be available when the facilities were ready for their intended use
because, in that case, the government would not have had to allow a fifteen percent
business tax credit. See 85 Gorgonio Wind Generating Co. v. Comm’r, 1994 WL
591909, at *10 (noting that “[t]he 15–percent business energy tax credit for wind
property expired on December 31, 1985”). In contrast, the government now argues in
the above captioned case that whether a facility was ready or not for its intended use is
irrelevant.
A number of more recent United States Tax Court decisions continue to agree
that application of the investment tax credit, and determination of a project’s “Placed in
service” date, should be interpreted with intended use in mind. See Brown v. Comm’r,
T.C. Memo. 2013-275, 2013 WL 6244549, at *12 (Dec. 3, 2013) (“And, just as the
ethanol plant in Valley Natural Fuels needed to have all of its components in place and
functioning in the right way to fulfill its specifically assigned function before we could find
that it was placed in service, so too did the Challenger require installation of all of its
necessary parts—including the conference table and enlarged display screens—to fulfill
its specifically assigned function before it was placed in service.” (citing Valley Natural
Fuels v. Comm’r, 1991 WL 135497)). Brown v. Comm’r also emphasizes that:
Cases like Consumers Power and Valley Natural Fuels tell us to look at
the taxpayer—he’s the one who gets to determine what an asset’s
“specifically assigned function” is. . . . Even though an asset like the
Challenger may be operational, it’s not placed in service until it is
operational for its intended use on a regular basis.
81
Brown v. Comm’r., 2013 WL 6244549, at *12 (quoting Treas. Reg. § 1.46-3(d)(ii) and
citing Consumers Power Co. v. Comm’r, 89 T.C. 710; Valley Natural Fuels v. Comm’r,
1991 WL 135497).
The court also notes that defendant’s witness, Mr. Settle from NREL, testified at
trial that he viewed the “placed in service” date during the evaluation of the RP1 and SJ-
1 projects as the date the project is “ready and available for its intended use.” Mr. Settle
testified to his understanding of “placed into service” as when “construction has ended,
if you will. The facility, the energy property, is ready and available for its intended use.”
Nonetheless, the record suggests that Mr. Settle and NREL also considered other
factors to determine when a facility was placed into service, which do not necessarily
align with the Treasury Regulations or Internal Revenue Code. Mr. Settle stated: “But
for the most part, in the 1603 program, we view that as essentially the stopping of
construction and the point at which the costs are basically capitalized to the energy
property, so it gives us our eligible basis from which to make the calculation.” He also
stated: “But, you know, a lot of this basically hinges on is the facility up and running
according to their commissioning report as submitted by the applicant.”
It is apparent from the above and the court’s analysis, that the Internal Revenue
Code sections and Treasury Regulations pertaining to the I.R.C. § 48, “Energy credit,”
like I.R.C. § 46, “Amount of credit,” should be interpreted keeping in mind a facility’s
intended use or “specifically assigned function,” and the taxpayer is “the one who gets
to determine what an asset’s ‘specifically assigned function’ is. . . .” Brown v. Comm’r.,
2013 WL 6244549, at *12 (quoting Treas. Reg. § 1.46-3(d)(ii)). The evidence in the
record indicates that the intended use of the RP1 and SJ-1 facilities is to function
mostly, if not one hundred percent, on anaerobic digester biogas. Although defendant
points out that technically, the facilities can function on natural gas, even Mr. Markell,
defendant’s expert witness, states that, although “technically the equipment can run on
natural gas,” “[c]ontractually and economically, yes, you have to run them on biogas.”
Defendant is correct that plaintiff RP1, on its Section 1603 grant application, put its
“Property Placed in Service” date as September 11, 2012, although, at that time, RP1
was only commissioned by FuelCell Energy on natural gas, and was not certified as
operating with at least a 75% biodigester gas blend until November 9, 2012. 39 This
simply indicates, however, as plaintiffs state in their briefs, that RP1 and its parent, UTS
BioEnergy “incorrectly reported the placed-in-service date on its grant application. That
is, the fuel cell power plant was not ready and available for its specifically assigned
function—to operate on digester gas—before the gas conditioning equipment was
operational.” RP1’s date entry, however, does not appear to affect eligibility of the RP1
project for a Section 1603 grant that includes the project elements claimed by the
plaintiffs. 40
39 The record also does not affirmatively rule out that RP1 was using any anaerobic
digester biogas before November 9, 2012.
Related to the discussion above, Mr. Markell added that he considered it odd that the
40
monthly operations reports for the RP1 and SJ-1 projects, which track the performance
82
An analysis of the statutes, regulations, case law, and the record before the court
also fails to support defendant’s contention that the gas conditioning equipment should
be treated differently than other elements of a fuel cell power plant that the government
has included when calculating the cost basis for a Section 1603 grant. In particular, the
court finds little functional difference between natural gas desulfurizers and biogas gas
conditioning equipment. Defendant argues that the FuelCell Energy natural gas
desulfurizers are part of the “balance of plant” of a fuel cell power plant because they
“serve as a fail-safe in case the natural gas supply varies and there is an unexpected
increase in the amount of sulfur.” Defendant’s expert witness, Mr. Markell, stated that it
was typical to include a natural gas desulfurizer as part of a fuel cell facility operating on
natural gas, because, “[n]atural gas out of the pipeline has a tendency to have the sulfur
content vary, so it may meet the fuel spec one hour, but four hours later it may not, and
it will vary, so it’s really kind of a safety measure for FuelCell Energy . . . .” 41 In addition,
Mr. Markell testified that the natural gas desulfurizers perform similar work as the gas
of the fuel cell facilities, tracked the performance and uptime for both the fuel cell
module and the gas conditioning equipment. He explained that “[a]n operation report is
typically something that goes to upper management or the lenders on a timely basis,
whether it’s a week or every month, and gives an overall summary of the operation of
the projects.” Mr. Markell noted that “The unusual part in their operations report is they
show the availability for both the fuel cell and the gas conditioning system. While it is
common to track the availability of all the various subsystems, it’s very unusual to report
them to management on an individual basis.” Mr. Sharma testified at trial however, that
“depending on the complexity, there are many parameters which are tracked from time
to time for various reasons. If this were a nuclear power plant, you would probably track
57 different components. That doesn’t make it 57 different plants. It is a single plant. It’s
an integrated plant.” Although the monthly operations reports separately tracked “Fuel
Cell Availability” as well as “DG [digester gas] Treatment Availability,” the court does not
consider the separate tracking as definitive that the gas conditioning equipment is not
within the “balance of plant” of the overall fuel cell power plant.
41 Mr. Markell appears to have made contradictory statements. Mr. Markell previously
stated: “The desulfurizers provide some additional gas cleanup if necessary,” but added
that “the fuel must meet that spec prior to getting to this equipment.” Mr. Markell’s
testimony that sometimes, the natural gas quality from the pipeline can vary and fall
below the fuel cell specification, enough to “poison” the fuel cells, contradicts his prior
testimony that the natural gas meets the fuel specification at the pipeline, and
defendant’s statements in its brief, that “[t]he pipeline natural gas that fuels the DFC
power plant meets the fuel specifications without any additional treatment.” The court
also notes that, in the FuelCell Energy fuel specification document, when discussing
“Fuel Specifications” for “Natural Gas,” the following is stated: “Fuel with contaminants
beyond the Standard Design limits shown in Table 2 require review and written approval
by FCE and may require additional fuel treating equipment or decreased maintenance
intervals.” (emphasis in original). This indicates that, sometimes, natural gas may need
treatment before it can meet the FuelCell Energy fuel cell specification.
83
conditioning equipment, “[i]n the sense that they do provide some cleaning of the gas,
yes, but not to the same level.” As discussed, the definition of “fuel cell power plant” in
I.R.C. § 48 is to be interpreted keeping in mind the intended use of the facility in
question, see Brown v. Comm’r., 2013 WL 6244549, at *12, which, in this case, is the
production of energy from anaerobic digester biogas, and which requires the biogas to
be cleaned before use by the fuel cell module. As discussed more below, the term “fuel”
in I.R.C. § 48 is considered to be broadly defined and includes anaerobic digester gas.
See, e.g., Treas. Reg. § 1.48-9(c)(5)(ii). Mr. Markell stated that the natural gas
desulfurizers’ purpose is to clean the natural gas so “they don’t poison the catalyst in
there, in their fuel cells.” Defendant has failed to explain why natural gas desulfurizers
should be part of a fuel cell power plant “balance of plant,” when they clean a fuel
intended for use by the RP1 and SJ-1 projects, although gas conditioning equipment,
which also cleans a fuel intended for use by the RP1 and SJ-1 projects, should not be
considered “balance of plant.”
Defendant notes one difference between the natural gas desulfurizers and the
gas conditioning equipment—that “natural gas is conditioned prior to insertion in the
pipeline, which is why it meets the FCE fuel specifications without additional treatment.”
Defendant continues, “[b]ecause the pipeline natural gas that fuels the DFC power plant
meets the fuel specifications without any treatment by the separate gas conditioning
system, external gas cleanup is not necessary to the fuel cell systems’ conversion of
fuel to electricity.” Defendant asserts that
applying Mr. Wason’s theory of “necessity”, the gas conditioning
equipment used in the fields by the natural gas extraction companies
should be considered as part of the balance of plant of any fuel cell power
plant that happens to hook up to a pipeline receiving that gas from a utility.
Such a conclusion, however, would obviously be absurd.
Defendant’s argument incorrectly asserts that the natural gas coming from the
pipeline “meets the FCE fuel specifications without additional treatment.” Mr. Markell,
defendant’s expert witness, stated that “[n]atural gas out of the pipeline has a tendency
to have the sulfur content vary, so it may meet the fuel spec one hour, but four hours
later it may not . . . .” Defendant’s assertion that plaintiffs’ theory would lead to an
absurd result, is also incorrect. Defendant’s hypothetical scenario tries to convince the
court that, because it is necessary for natural gas to be cleaned before use by a fuel cell
module, the entire utility-side natural gas cleaning operation would be eligible for a
Section 1603 grant for this one project. The entire utility natural gas cleaning operation,
however, is not necessary to supply natural gas to the RP1 and SJ-1 facilities.
Which Converts a Fuel into Electricity
In defendant’s third argument for why gas conditioning equipment is not “balance
of plant” the government refers back to the text of the definition of “fuel cell power plant”
in I.R.C. § 48(c)(1)(C). According to defendant, “The Statutory Definition of Fuel Cell
Property Is Limited to the System that Converts Fuel to Electricity.” (emphasis in
84
original). Defendant contends that the other terms in the I.R.C. § 48 definition of “fuel
cell power plant,” in particular, the terms “integrated system,” and “balance of plant,” are
limited only to those components “that support the conversion of the fuel into electricity,”
and, therefore, “do not include the property required to clean up the biogas so it can be
used as fuel.” Defendant explains that “only one integrated system ‘converts a fuel to
electricity’: the DFC power plant provided by FCE, which takes natural gas and biogas
and generates electricity.” Therefore, according to defendant, “plaintiffs attempt to
shoehorn the external gas conditioning system into the statutory definition of ‘fuel cell
power plant,’ even though it does not convert a fuel to electricity, as that statute
requires.”
Defendant argues that the gas conditioning equipment is not part of the system
that converts fuel to electricity, because the anaerobic digester biogas that enters the
gas conditioning system is not “fuel.” In support, defendant asserts that “fuel” is limited
to chemicals that already meet the FuelCell Energy fuel specifications document, “Fuel
Specifications for Direct FuelCell® Powerplants.” (emphasis in original). As a result,
defendant defines “balance of plant,” to exclude any components of the RP1 and SJ-1
fuel cell facility that handle biogas before it has been cleaned, even if to meet the
FuelCell Energy fuel specifications. Defendant relies on trial testimony of its expert
witness, Mr. Markell, who stated that he “looked at the statute and tried to define the
terms in the statute technically. The key part that I focused on is taking a fuel and
converting it by electromechanical means to produce electricity.” Mr. Markell stated in
response to a question:
Q. So going through that analysis, really the term “fuel” is what
distinguishes the hypothetical scenario where you have the fuel cell stack
assembly and associated balance of plant components and this additional
phraseology in the statute; is that -- is that what your opinion is based on?
A. In my opinion, yes, that is. The differentiating factor is the term
“fuel.”
Mr. Markell expanded on his explanation, focusing on the definition of the word “fuel” in
his analysis:
So looking at the major systems, the fuel cell power plant is the
only portion that takes a fuel and converts it electrochemically to produce
electricity.
Now, the key to saying that is the definition of “fuel,” so technically
you would look at how is “fuel” defined.
Based on looking at the documents provided, FuelCell Energy
provides a fuel spec, a specification for the fuel that is acceptable for use
in their fuel cell.
85
So once that material meets that fuel spec, at that point in time that
is what I was considering as fuel.
So another way to put it is, in their fuel spec they state “acceptable
fuel,” so at that point it’s an acceptable fuel to be used in the fuel cell
power plant.
Mr. Markell further testified that “you’ll always have a fuel specification no matter the
technology, whether it’s a gas turbine, whether it’s a reciprocating engine, a
microturbine or whatever,” and, therefore, fuel is to be defined based on the specific fuel
specification applicable for the power plant under examination.
Plaintiffs respond that defendant’s focus on “fuel” in the Internal Revenue Code
“eliminates the key part of the definition that defines what property is included in that
plant—‘an integrated system comprised of a fuel cell stack assembly and associated
balance of plant components.’” Plaintiffs assert that the phrase “balance of plant” is an
important part of the statutory definition. According to plaintiffs, if the court concludes
that gas conditioning equipment can fall within the “balance of plant” of a fuel cell power
plant (as it has in this case above), the analysis should stop there. In support, plaintiffs
argue that, “[u]nder the Government’s balance-of-plant definition,” equipment is already
considered “balance of plant” even though it “performs a different function than
‘convert[ing] a fuel into electricity,’ including gas conditioning equipment for natural gas
[natural gas desulfurizers], the water treatment system, the deoxidation module and fuel
blending/switching system for digester gas, and the substantial ‘downstream’ electrical
equipment supplied by FuelCell Energy and the EPC.”
Plaintiffs are correct in noting that the government’s alleged definition of “balance
of plant” is quite broad, and covers materials such as the concrete “foundations” and
various electrical components that may be considered, at best, tangentially related to
converting fuel to electricity. The Internal Revenue Code defines “fuel cell power plant”
as “an integrated system comprised of a fuel cell stack assembly and associated
balance of plant components which converts a fuel into electricity using electrochemical
means.” I.R.C. § 48(c)(1)(C). The issue, therefore, is whether the phrase, “which
converts a fuel into electricity using electrochemical means,” modifies the whole phrase
“an integrated system comprised of a fuel cell stack assembly and associated balance
of plant components,” or only the phrase “fuel stack assembly” and/or “associated
balance of plant components,” and whether the phrase, “which converts a fuel into
electricity using electrochemical means” limits a “fuel cell power plant” only to the fuel
cell components that operate on natural gas, as defendant prefers.
Plaintiffs argue, in the alternative, that, when examining the phrase “which
converts a fuel into electricity” under I.R.C. § 48, the key word to which defendant
points, “fuel,” should be broadly defined and include anaerobic digester biogas. Plaintiffs
state that defendant’s expert, “Mr. Markell’s critical ‘differentiating factor,’ the term ‘fuel’
in Code § 48(c)(1)(C), is not based on any fuel cell industry definition.” Plaintiffs state
that Mr. Markell incorrectly “latched onto the FuelCell Energy fuel specifications, which
86
Mr. Leo testified are not intended to define what is a ‘fuel’ but are intended to define the
limits for fuel contaminants in natural gas and digester gas.” Plaintiffs note: “As Mr.
Markell acknowledged, the statute does not use the term ‘acceptable fuel,’ and neither
does the legislative history or any IRS or Treasury interpretation of Code § 48(c)(1)(C).”
Plaintiffs maintain that “Mr. Markell conceded that he did not review any particular
definitions in the energy industry for the term ‘fuel,’” and that fuel in the industry is
broadly defined to be “‘[a]ny material that can be burned to make energy,’” quoting
Department of Energy publications. Plaintiffs also add that a Treasury Regulation
clarifying I.R.C. § 48, “Treas. Reg. § 1.48-9(c)(5)(ii) defines the term ‘fuel’ as ‘[a] fuel is
a material that produces usable heat upon combustion.’”
Plaintiffs assert that Mr. Markell admitted at trial that anaerobic digester gas
meets industry-defined definitions of fuel, and that, if fuel was defined in this manner,
the gas conditioning equipment would therefore be part of the system which converts
fuel to electricity, pursuant to I.R.C. § 48(c)(1)(C). Plaintiffs add that: “The deepest flaw
in Mr. Markell’s logic is, as Mr. Sharma testified, that ‘every fuel that has to be
introduced in a fuel cell stack, which has very stringent requirements, has to be
conditioned in some fashion or other.’” Plaintiffs conclude by stating:
It is clear that the purpose of the language “which converts a fuel into
electricity using electrochemical means” in Code § 48(c)(1)(C) is purely
definitional—it is intended to define what a fuel cell power plant does not
what its outer boundaries are or otherwise change the scope of the
components specifically listed in the definition. There is no basis for
setting arbitrary boundaries based on the manufacturer’s fuel
specifications. The evidence in the record establishes that the digester
gas is a “fuel” and, in any event, this language does not arbitrarily limit the
scope of the fuel cell power plant to exclude necessary gas conditioning
equipment.
As Mr. Markell admitted on cross-examination, the term “acceptable fuel” coined
by defendant does not appear in Section 1603 or I.R.C. § 48. In contrast to the
testimony of defendant’s expert witness regarding the definition of “fuel,” other
definitions of the term “fuel” were provided by the Department of the Treasury, the
Department of Energy, industry documents, and other witnesses at trial, that are
relevant to the discussion. Looking first at the Treasury Regulations, “fuel” is defined
broadly, in a manner that would include anaerobic digester biogas as a “fuel.” Treasury
Regulation § 1.48-9, titled “Definition of energy property,” defines “fuel” as “a material
that produces usable heat upon combustion.” See Treas. Reg. § 1.48-9(c)(5)(ii).
Furthermore, although Mr. Markell testified that “I don’t believe there is a specific
definition for ‘fuel’ in the energy industry,” at trial, plaintiffs provided two definitions for
“fuel,” issued by federal government agencies that operate in the energy industry. The
first definition was from the Department of Energy’s “OFFICE OF ENERGY
EFFICIENCY & RENEWABLE ENERGY,” online “Glossary of Energy-Related Terms.”
(capitalization and emphasis in original). The Department of Energy Glossary defined
“FUEL” as “[a]ny material that can be burned to make energy.” (capitalization in
87
original). The Department of Energy Glossary also defined “FUEL CELL” as “[a]n
electrochemical device that converts chemical energy directly into electricity,” mirroring
the definition given to a fuel cell in I.R.C. § 48. (capitalization in original). The second
definition offered at trial comes from the United States Energy Information
Administration’s online “GLOSSARY,” (capitalization in original), which defined “Fuel”
as: “Any material substance that can be consumed to supply heat or power. Included
are petroleum, coal, and natural gas (the fossil fuels), and other consumable materials,
such as uranium, biomass, and hydrogen.” The same glossary also defined “Fuel cell”
in relevant part as: “A device capable of generating an electrical current by converting
the chemical energy of a fuel (e.g., hydrogen) directly into electrical energy.” Mr. Markell
testified that he was not familiar with the Department of Energy or the Energy
Information Administration glossaries of definitional terms, although he did reference the
Energy Information Administration in his expert report. Moreover, despite Mr. Markell’s
statement that “I’m not aware of any specific definitions provided by DOE or EIA
regarding ‘fuel’ or ‘fuel cell power plant’ or specific terms relative to this case,” when
asked if the “Department of Energy is a good place to look for specific definitions of
matters for the energy industry,” Mr. Markell responded, “[y]ou could look there, yes.”
Mr. Markell also testified that under the definitions provided by the Department of
Energy and the Energy Information Administration, the anaerobic digester biogas would
be a “fuel.”42
The FuelCell Energy literature appears to also take a broader view of the term
“fuel.” For example, the “DFC3000™ 2.8 MW POWERPLANT SPECIFICATION
SUMMARY,” contained in the record, states that “[t]he powerplant is designed to
operate on natural gas and anaerobic digester gas (with auxiliary equipment) as the fuel
source.” (capitalization and emphasis in original). Mr. Leo from FuelCell Energy testified
that “auxiliary equipment” refers to
a couple small modifications that are made into our existing balance of
plant equipment. There’s an extra catalyst that’s added in one of the
reactors to get rid of any oxygen that might be there and there’s the actual
-- the extra fuel connection for the second fuel, so that’s one modification.
And then there’s the -- the other auxiliary equipment would be the biogas
cleanup system.
FuelCell Energy’s “Direct FuelCell® APPLICATIONS GUIDE” for the DFC1500 also
states that “Direct FuelCell® powerplants can effectively utilize biogas or Anaerobic
Digester Gas (ADG), when equipped with the appropriate ADG processing equipment.”
(emphasis in original).
A review of the FuelCell Energy fuel specification document also indicates that,
“[w]hile designed primarily for operation on natural gas, Direct FuelCell powerplants can
42 A review of the parties’ joint stipulation of fact suggests defendant’s definition of “fuel”
is atypical in the industry. The parties have jointly stipulated that “[b]iogas may be
discarded by burning it (in a process called ‘flaring’) or may be used as a fuel source.”
88
effectively utilize Anaerobic Digester Gas (ADG) . . .” as a “fuel,” when properly
equipped. In the fuel specification document, “Table 1: DCF® Fuel Major Components
and Physical Properties,” lists specifications and requirements for fuel cells operating
on natural gas or anaerobic digester gas, and requires that methane comprise fifty-five
to one hundred percent of the volume of the intake gas to the fuel cell. (emphasis in
original). 43 Also in the fuel specification document, “Table 2: Contaminant Limits for
DFC® Fuels,” lists limits of “Total Sulfur,” “Water,” “Halogens,” “Siloxanes,” “Metals,”
“Particulates,” and “Dust, Gum, Solid Matter,” for both natural gas and anaerobic
digester gas as an intake gas. (emphasis in original). Mr. Leo explained at trial that
Table 2 of the fuel specification “defines what the cleanup system has to do,” but does
not relate to the determination of raw digester gas as a fuel. On cross examination, Mr.
Leo affirmed that natural gas can be blended with anaerobic digester gas and meet a
third category titled “Externally Purified Fuel Limits” which is how the RP1 and SJ-1
fuel cells were installed. (emphasis in original). The fuel cell specification, on review,
does not appear to define the term “fuel,” although the document indicates that an
acceptable fuel is simply a fuel that contains at least fifty-five percent methane, and is
removed of contaminants. Mr. Leo testified that the purpose of the fuel specification “is
to create a mutual understanding for what we’ve designed, what kinds of fuels we have
designed our equipment to use, and the limits of the bulk concentrations and
contaminant concentrations that the equipment can either take without modification or
can take with modification,” which was not intended to define the word “fuel.” Mr. Leo
further testified regarding the fuel specification settings: “It’s what the customer has to
meet before putting the fuel into our equipment without modification or some adjustment
of some kind.” Mr. Leo’s comments indicate that the fuel specification does not limit
what is technically allowed into the fuel cell module, just what is allowed without
modification of the fuel cell module or fuel cell assembly, and, moreover, that the fuel
specification can change, depending on changes in technology or the contracting
relationship between the parties.
Finally, trial testimony further supports that the term “fuel” in the statute has a
broader definition than just “acceptable fuel.” Mr. Sharma, from Anaergia, testified that
he understood anaerobic digester gas to be a fuel because “[i]f you put a flame to it, it
will burn.” Mr. Sharma also testified that the anaerobic digester gas contains methane
as the fuel, and that the gas conditioning equipment’s purpose is to remove
contaminants, not impact the fuel. Mr. Sharma also stated that, according to his
understanding, the industry would refer to anaerobic digester gas as a fuel. Mr. Sharma
noted that “Biogas has contaminants. Natural gas has contaminants. And as I said
before, every fuel that has to be introduced in a fuel cell stack, which has very stringent
requirements, has to be conditioned in some fashion or other.” At trial, defendant asked
Mr. Sharma whether “natural gas is the reference fuel for a fuel cell,” referring to the fuel
cell specification, but Mr. Sharma stated “depending on the fuel cell, it could be
43Mr. Wason testified that the minimum methane content is more likely sixty percent for
the FuelCell Energy fuel cells: “some of the documents say 55, but 60 percent to get full
load out of the fuel cell.”
89
hydrogen fuel. It could be ethanol, methanol. There are many different kind of fuel cells
which run on many different fuels.”
Mr. Leo from FuelCell Energy similarly defined fuel to be “basically anything that
can react with oxygen to produce thermal energy or electrical energy.” Mr. Leo testified
that “[t]o me, the term ‘fuel’ is any material -- it can be a liquid. It can be a gas. It can be
solid like coal -- that will react with oxygen and air to make heat.” Mr. Leo stated at trial
that both natural gas and anaerobic digester biogas contain methane, and that is the
fuel the fuel cells rely on. Mr. Leo further testified that “FuelCell Energy fuel cells can --
are designed to use methane as the fuel source, so they can use methane-based fuels,
which would include natural gas. It would include biogas from a wastewater treatment
plant. It could include things like coal mine methane, anything that is predominantly
methane.”
Mr. Wason, plaintiffs’ expert, also defined anaerobic digester gas as a “fuel,”
because “[i]t has normally between 60 to 65 percent methane. And that fuel can be
used for a number of places like boilers, internal combustion engines, fuel cells,
microturbines, gas turbines.” Mr. Wason testified that the gas conditioning equipment
does not change the nature of the anaerobic digester biogas into a fuel, and added,
“[i]t’s a fuel right when it comes out of the anaerobic digester because it has methane
content of 60 to 65 percent and it comes out of the digester. It’s a fuel, but it’s not as
clean. You go through the gas conditioning equipment. Then it becomes clean fuel
suitable for fuel cell.” Mr. Wason reemphasized that during the gas conditioning process
“no methane is added, which is the fuel.”
Defendant’s expert, Mr. Markell defended his position on the definition of “fuel” by
focusing on the fuel specification, stating “I think ‘fuel’ has to go back to the fuel spec,
so that is the material that’s actually converting into electricity, not the raw biogas.” Mr.
Markell testified that the fuel cell specification, which set the limits of what is “acceptable
fuel,” created a boundary in terms of the definition of fuel cell power plant, and that the
equipment working with non-acceptable fuel was outside of that boundary and,
therefore, not part of the fuel cell power plant. Mr. Markell further testified that the gas
conditioning equipment’s different “function,” to turn the input fuel into “acceptable fuel,”
prevented it from being classified as part of the fuel cell power plant: “The gas
conditioning system is taking the biogas, and it is cleaning it up to turn it into an
acceptable fuel, so really at that point in time the gas conditioning system is external
and is not responsible for converting fuel to electricity.”
Mr. Markell indicated, however, that his definition of “acceptable fuel” could
change to include anaerobic digester gas, depending on the role of FuelCell Energy in
the RP1 and SJ-1 projects.
Q. I think your testimony, though, was that you believe that it did
make a difference whether there was a single EPC contract that
encompassed the -- where the EPC contractor was supplying both the gas
90
conditioning equipment and the fuel cell equipment under those
circumstances.
...
Q. And under those circumstances you would say that the gas
conditioning equipment was balance of plant.
A. If the raw biogas met the fuel specification, yes, at that point in
time the gas conditioning would be part of balance of plant.
...
A. It all depends on the fuel specification because I’m using the fuel
specification to actually define what acceptable fuel is to be converted into
electricity.
Mr. Markell added that “you’re redefining the term ‘fuel’ with a single EPC contract or
you could redefine the term ‘fuel’ with a single EPC contract, so at that point you would
end up redefining what ‘plant’ means.”
Defendant is attempting to define “fuel” utilizing a variable term dependent upon
an individual contractor’s fuel specification document for a particular contract, rather
than to define fuel in line with the multiple government-provided definitions referenced
above, which a number of witnesses agreed at trial constituted a better approach.
Although defendant asserts that the definition of fuel in the Internal Revenue Code is
narrower than the definition provided by other government sources, this assertion
seems unsupported by a reading of the Internal Revenue Code, other government
documents, and the trial testimony. Instead, it seems more appropriate to define “fuel”
broadly, as “[a]ny material that can be burned to make energy.” 44
Defendant also compares the definition of “fuel cell power plant” in Section
1603(d)(2) and I.R.C. § 48, with other parts of the Internal Revenue Code, in order to
44 Mr. Markell emphasized the importance of defendant’s definition of the word “fuel” to
defendant’s case, and admitted that if fuel was defined in favor of plaintiffs’ view, the
gas conditioning equipment would be considered “balance of plant” of a “fuel cell power
plant:”
Q. . . . I’m saying if, if the term “fuel” includes raw anaerobic
digester gas, then your opinion would be that the gas conditioning
equipment is an associated balance of plant component; is that correct?
A. If the statute specifically stated that anaerobic digester gas was
acceptable, then yes.
91
contend that the definition of a fuel cell power plant should be read narrowly to exclude
plaintiffs’ gas conditioning equipment. Defendant points the court to other types of
facilities covered under the Section 1603 grant program, and argues that Congress
affirmatively defined a broad set of components as eligible for a Section 1603 grant for
certain facility types, thereby indicating that Congress meant the opposite when defining
a fuel cell power plant. Defendant notes, for example, that the definition for a “stationary
microturbine power plant” under Section 1603 and in I.R.C. § 48(c)(2)(C), covers not
only “associated balance of plant components which converts a fuel into electricity and
thermal energy,” but also “‘all secondary components located between the existing
infrastructure for fuel delivery and the existing infrastructure for power distribution,
including equipment and controls for meeting relevant power standards, such as
voltage, frequency, and power factors.’” (quoting § 48(c)(2)). Defendant also notes that
“geothermal equipment under section 48(a)(3)(A)(iii),” “includes not just electricity
generation, but specifically includes all ‘equipment used to produce, distribute, or use
energy derived from a geothermal deposit.’ § 1603(d)(5).”
Defendant argues that “where Congress wanted to include equipment beyond
the ‘system . . . which converts a fuel into electricity,’ it simply said so,” and quotes
Dean v. United States, 556 U.S. 568, 573 (2009) (“‘[W]here Congress includes
particular language in one section of a statute but omits it in another section of the same
Act, it is generally presumed that Congress acts intentionally and purposely in the
disparate inclusion or exclusion.’” (quoting Russello v. United States, 464 U.S. 16, 23
(1983))). Defendant asserts that reading “secondary components” such as gas
conditioning equipment into the definition of fuel cell power plant “would render
superfluous the ‘secondary components’ language in the parallel microturbine
definition,” and quotes United States v. Commonwealth Energy System, 235 F.3d 11,
15 (1st Cir. 2000) (“As a general rule, a statute should be construed so that each part is
given effect and no part is rendered inoperative or superfluous.”).
Plaintiffs reply that “Congress did not signal a narrower definition for qualified fuel
cell property in defining ‘qualified microturbine property’ in Code § 48(c)(2).” According
to plaintiff:
Congress felt compelled to make clear what that definition specifically
includes in addition to the general components listed in the principal part
of the definition. That may be a result of the unique nature of
microturbines which require an additional set of electrical equipment to
meet power standards and because of the potential overlap with non-
qualified electrical transmission equipment. If anything, what this shows is
that Congress intended to define the “integrated system” for fuel cell and
microturbine properties to include gas conditioning equipment as balance
of plant, not exclude it for fuel cell properties.
Plaintiffs also note that defendant’s new argument contradicts its earlier contention, that
“fuel” is to be defined according to the FuelCell Energy fuel specification: “The
Government’s position suggests that Congress adopted a definition for the microturbine
92
power plant that does not depend on the equipment manufacturer’s fuel specifications
and includes ‘external’ equipment such as gas conditioning equipment—even though
the exact same language is used.”
The court notes that the United States Supreme Court has limited the Russello
holding on statutory construction. In City of Columbus v. Ours Garage and Wrecker
Service, Inc., 536 U.S. 424, 425 (2002), the United States Supreme Court stated: “The
Russello presumption—that the presence of a phrase in one provision and its absence
in another reveals Congress’ design—grows weaker with each difference in the
formulation of the provisions under inspection.” In addition, the United States Supreme
Court has indicated that the Russello direction has to be considered in the overall light
of congressional intent, and that reviewing courts should “‘“look not only to the particular
statutory language, but to the design of the statute as a whole and to its object and
policy.”’” Negusie v. Holder, 555 U.S. 511, 519 (2009) (quoting Dada v. Mukasey, 554
U.S. 1, 16 (2008) (quoting Gozlon–Peretz v. United States, 498 U.S. 395, 407 (1991))).
Directly below the definition for “Qualified fuel cell property” in I.R.C. § 48(c)(1)
is the definition for “Qualified microturbine property.” See I.R.C. § 48(c)(2) (emphasis
in original). According to the statute, “[t]he term ‘qualified microturbine property’ means
a stationary microturbine power plant,” which meets a number of size and placed in
service date requirements. See id. A “stationary microturbine power plant” is defined as:
(C) Stationary microturbine power plant
The term “stationary microturbine power plant” means an integrated
system comprised of a gas turbine engine, a combustor, a recuperator or
regenerator, a generator or alternator, and associated balance of plant
components which converts a fuel into electricity and thermal energy.
Such term also includes all secondary components located between the
existing infrastructure for fuel delivery and the existing infrastructure for
power distribution, including equipment and controls for meeting relevant
power standards, such as voltage, frequency, and power factors.
I.R.C. § 48(c)(2) (emphasis in original). For reference, a “fuel cell power plant” is defined
as the following:
(C) Fuel cell power plant
The term “fuel cell power plant” means an integrated system comprised of
a fuel cell stack assembly and associated balance of plant components
which converts a fuel into electricity using electrochemical means.
I.R.C. § 48(c)(1). Although the “stationary microturbine power plant” definition does
have an additional sentence, defendant’s reliance on Russello does not resolve the
issue. The definition for “stationary microturbine power plant” covers a completely
different type of energy property to the one at issue before this court, and, thus,
93
defendant’s attempt to make a direct statutory language comparison, is limited. See City
of Columbus v. Ours Garage and Wrecker Serv., Inc., 536 U.S. at 425 (“The Russello
presumption—that the presence of a phrase in one provision and its absence in another
reveals Congress’ design—grows weaker with each difference in the formulation of the
provisions under inspection.”). Plaintiffs contend that microturbine power plants “require
an additional set of electrical equipment to meet power standards,” and that
characteristic explains the additional sentence. The court notes that the specific
“secondary components” referenced in the microturbine definition are electrical in
nature, “including equipment and controls for meeting relevant power standards, such
as voltage, frequency, and power factors,” which can be used to support plaintiffs’
argument that the additional sentence in the microturbine power plant definition relates
to specific electrical components unique to microturbines. See I.R.C. § 48(c)(2)(C).
Given that gas conditioning equipment is a mechanical/chemical component that does
not play a role in “meeting relevant power standards,” defendant’s argument does not
rule out that a fuel cell assembly’s “balance of plant components which converts a fuel
into electricity” can include gas conditioning equipment, for both fuel cell or microturbine
facilities.
Regarding defendant’s reference to geothermal facilities, Section 1603 offers two
means by which a geothermal facility can be awarded a grant. Section 1603(d)(1) offers
a blanket grant to, as stated in I.R.C. § 45(d)(4), any “facility using geothermal or solar
energy to produce electricity.” See I.R.C. § 45(d)(4). In addition, under Section
1603(d)(5), a grant is available for a “GEOTHERMAL PROPERTY,” (capitalization in
original), which contains, as stated in I.R.C. § 48(a)(3)(A)(iii), “equipment used to
produce, distribute, or use energy derived from a geothermal deposit (within the
meaning of section 613(e)(2)), but only, in the case of electricity generated by
geothermal power, up to (but not including) the electrical transmission stage.” See
I.R.C. § 48(a)(3)(A)(iii). It is immediately apparent that this definition shares little in
common with the definition for a “fuel cell power plant,” again reducing the value of the
comparison defendant seeks to make. See City of Columbus v. Ours Garage and
Wrecker Serv., Inc., 536 U.S. at 425.
Defendant, alternatively, steps back to look more broadly at the relationship
between Section 1603 and the two sections of the Internal Revenue Code, I.R.C §§ 45
and 48. According to defendant, there are “two general types of energy property that
may qualify under § 1603: projects that qualify because of their fuel source and property
that qualifies as a specified type of energy generation property.” Defendant maintains
that the first category of energy property is governed by I.R.C. § 45, which, according to
defendant, addresses projects “generating electricity from a qualifying fuel source.” See
Section 1603(d)(1). I.R.C. § 45 is referenced in Section 1603(d)(1), which allows a grant
for property “which is part of a qualified facility (within the meaning of section 45 of such
Code) described in paragraph (1), (2), (3), (4), (6), (7), (9), or (11) of section 45(d) of
such Code.” Id. Defendant maintains that “[t]he second category” of eligible facilities
“includes other specified energy property defined in [I.R.C.] § 48,” citing to Section
1603(d)(2)–(8). According to defendant, projects eligible for a grant under I.R.C. § 48
are narrowly defined: “The narrow definition of ‘qualified fuel cell property’ is dictated by
94
the statutory structure.” Defendant adds: “Section 45 property need only generate
electricity from a specified source, but § 48 property, regardless of whether it is integral,
qualifies only to the extent that it meets the specific relevant statutory definition in § 48.”
Defendant also states:
This distinction is borne out in the legislative history of § 1603, which
states that it provides payments to energy property that is either (1) “an
electricity production facility” otherwise eligible for the renewable electricity
production credit (§ 45) or (2) qualifying property otherwise eligible for the
investment tax credit (§ 48). H.R. Rep. No. 111-16, at 620-21 (Feb. 12,
2009) (Conf. Rep.).
Plaintiffs respond that the opposite is true if anything, and that facilities defined
under I.R.C. § 48, are more broadly defined than facilities under I.R.C. § 45. According
to plaintiff:
§ 45 facilities have been construed narrowly to exclude property that is
normally included in ITC [investment tax credit, I.R.C. § 48] basis. The
historical reason for this is the narrower definition of facility allows existing
facilities to be “requalified” with a new placed-in-service date in certain
situations. For example, in Notice 2008-60, § 3.01(1), 2008-2 C.B. 178,
179, which Mr. Settle mentioned in his testimony (Tr. 383:14-25), the IRS
defined the components of the facility narrowly to exclude, among other
things, fuel processing equipment and roads. This rule is confined to the
PTC [production tax credit] under § 45 and did not carry over to the ITC or
Section 1603 for biomass facilities.
(footnote omitted). Plaintiffs state that “[t]here is no evidence that Congress intended to
establish a more generous regime for the narrower § 45 facilities than for the historically
broader § 48 facilities.”
Moreover, defendant’s argument does not alter the court’s understanding of the
term “QUALIFIED FUEL CELL PROPERTY” under Section 1603(d)(2), arrived at
through traditional tools of statutory interpretation. (emphasis in original). Even
assuming, as defendant argues, that “fuel cell power plant” under I.R.C. § 48(c) is to be
defined narrowly and, as defendant states, “only to the extent that it meets the specific
relevant statutory definition in § 48,” plaintiffs still have demonstrated to the court that
the gas conditioning equipment meets the statutory definition of “fuel cell power plant”
under I.R.C. § 48, and, thus, is a “QUALIFIED FUEL CELL PROPERTY” under Section
1603(d)(2). (emphasis in original).
The record, therefore, indicates that plaintiffs’ gas conditioning equipment is part
of “an integrated system comprised of a fuel cell stack assembly and associated
balance of plant components which converts a fuel into electricity using electrochemical
means.” I.R.C. § 48(c)(1)(C). The key terms in the statute, “integrated system,” “balance
of plant,” and “fuel,” should be understood to include the components necessary to the
95
fuel cell facilities’ intended operation on anaerobic digester biogas. The government’s
decision at the administrative level to not consider gas conditioning equipment as part of
a “fuel cell power plant” also appears to have been driven by the fact that the RP1 and
SJ-1 facilities were unique compared to the majority of projects reviewed by NREL. The
court considers the gas conditioning equipment at issue in this case as part of a “fuel
cell power plant,” and, thus, as part of a “QUALIFIED FUEL CELL PROPERTY” under
Section 1603(d)(2). (capitalization in original). Therefore, the court holds that the thirty
percent grant should have been awarded to the RP1 and SJ-1 facilities, including for the
gas conditioning equipment.
Plaintiffs also make an alternative argument for why the RP1 and SJ-1 gas
conditioning equipment should be covered under the Section 1603 grant program, this
time, relying not on the statutory language, but rather on the Treasury Regulations and
a Treasury Guidance document issued by Treasury related to the Section 1603 grant
program. According to plaintiffs,
Longstanding regulations under the ITC [investment tax credit, I.R.C. § 48]
provide that tangible property that is an “integral part” of certain qualifying
activities, including the furnishing of electricity, qualify for the ITC even if
such property performs an ancillary function to the principal equipment
(e.g., generating equipment).
(citing Treas. Reg. § 1.48-1(d)(4)). Plaintiffs note that the term “integral part” has been
defined broadly, citing New England Electric System v. United States, 28 Fed. Cl. 720,
725 (1993). Plaintiffs maintain that Treasury in its Treasury Guidance adopted an
“integral part” test as an alternative means to qualify a component of an energy property
under Section 1603.
The Department of the Treasury issued guidance documents titled “Payments
for Specified Energy Property in Lieu of Tax Credits under the American
Recovery and Reinvestment Act of 2009 Program Guidance,” which the parties
submitted as a joint exhibit. (emphasis in original). In his testimony, Mr. Settle from
NREL discussed the Treasury Guidance, and described it as “essentially a guide that
was put together by the Department of Treasury so applicants would understand how
they were administering the program.” Mr. Settle also indicated it was considered by
both NREL and Treasury in their review of applications. The Treasury Guidance, in
defining the global term “SPECIFIED ENERGY PROPERTY”, of which “QUALIFIED
FUEL CELL PROPERTY” is one type, see Section 1603(d), stated that a “specified
energy property” includes “only tangible property (not including a building) that is an
integral part of the facility.” 45 On the same page, the Treasury Guidance defines
“integral part” as:
45The guidance document continues, “tangible property is tangible personal property
and other tangible property as defined in sections 1.48-1(c) and (d) of the Income Tax
Regulations.” Treas. Reg. § 1.48-1(c) defines “tangible personal property” to include,
96
Property is an integral part of a qualified facility if the property is used
directly in the qualified facility and is essential to the completeness of the
activity performed in that facility. Roadways and paved parking areas
located at the qualified facility and used for transport of material to be
processed at the facility or equipment to be used in maintaining and
operating the facility are integral to the activity preformed [sic] there, but
roadways or paved parking lots that provide solely for employee and
visitor vehicle traffic are not an integral part [sic] a qualified facility.
Property is considered used as an integral part of a qualified facility if so
used either by the owner of the property or by the lessee of the property.
...
For qualified property that generates electricity, qualified property includes
storage devices, power conditioning equipment, transfer equipment, and
parts related to the functioning of those items but does not include any
electrical transmission equipment, such as transmission lines and towers,
or any equipment beyond the electrical transmission stage, such as
transformers and distribution lines.
Plaintiffs argue:
any tangible property except land and improvements thereto, such as
buildings or other inherently permanent structures (including items which
are structural components of such buildings or structures). . . . Further, all
property which is in the nature of machinery (other than structural
components of a building or other inherently permanent structure) shall be
considered tangible personal property even though located outside a
building. Thus, for example, a gasoline pump, hydraulic car lift, or
automatic vending machine, although annexed to the ground, shall be
considered tangible personal property.
Treas. Reg. § 1.48-1(d) defines “other tangible property” to include tangible property
used as an integral part of manufacturing, production, or extraction, or as
an integral part of furnishing transportation, communications, electrical
energy, gas, water, or sewage disposal services by a person engaged in a
trade or business of furnishing any such service, or which constitutes a
research or storage facility used in connection with any of the foregoing
activities.
The parties do not appear to dispute whether the gas conditioning equipment would
qualify as tangible personal property or other tangible property under Treasury
Regulation § 1.48-1.
97
Surely, if the roads in a fuel cell power project qualify for the grant, which
by the Government’s account have nothing to do directly with generating
electricity but are integral to its operation, then it follows that the gas
conditioning equipment has to be an integral part of the fuel cell power
plant since it cannot operate for its intended use with digester gas without
this equipment.
The Treasury Guidance appears to be based on the test for “Integral part” from
Treasury Regulation § 1.48-1(d)(4) (emphasis in original), which states “Property is
used as an integral part of one of the specified activities if it is used directly in the
activity and is essential to the completeness of the activity.” See Treas. Reg. § 1.48-
1(d)(4).
Defendant initially argues that the court should not rely on the “integral part”
definition in Treasury Regulation § 1.48(d)(4) because it was promulgated in reference
to a part of I.R.C. § 48 that was subject to a 1990 sunset provision. Defendant states:
“The only broader reference to the ‘integral part’ test is contained in regulations (Treas.
Reg. § 1.48-1) that were based on a statute that was repealed in 1990.” Plaintiffs reply
that “the ‘integral part’ standard has been a fixture of the ITC going back to 1964, when
those regulations were first promulgated.” The relevant reference, however, is to
Treasury’s guidance document issued for the Section 1603 program, which, itself,
happens to have been based on the language of Treasury Regulation § 1.48-1(d)(4).
The court notes that, although the underlying provision of the Internal Revenue Code
related to the “integral part” test may have been subject to sunset, the regulation still
exists, and appears to be in use today.
Defendant also contends that the “integral part” test referenced in the Treasury
Guidance does not expand what can be part of a qualified facility under Section 1603,
but, actually, is a limitation: “it is a threshold for qualifying, not an expansion of what
qualifies. In other words, it disqualifies pieces from otherwise qualifying property.”
Defendant states that “[I.R.C.] Section 48 property (including fuel cell power plant and
microturbines), regardless of whether it is integral, qualifies only to the extent that it
meets the specific delimiting language of the relevant statutory definition in § 48 (an
‘integrated system . . . which converts a fuel to electricity’).” 46 Defendant also reminds
the court that the term “integral part” is not in the statute. Plaintiffs respond that “it is
counterintuitive to suggest that ITC facilities are not subject to the “integral part”
46 The Treasury Guidance states that “[s]pecified energy property includes only tangible
property (not including a building) that is an integral part of the facility.” Although
defendant may be correct that the “integral part” clause is a limit to what can be
considered as eligible for a Section 1603 grant, and a component “integral” to an
already qualified specified energy property is not automatically eligible for a Section
1603 grant, the “integral part” standard “is a threshold for qualifying, not an expansion of
what qualifies,” and the various statutory requirements of Section 1603 must be met
independently to qualify for a Section 1603 grant.
98
standard when that standard originates from the ITC regulations, see Treas. Reg. §
1.48-1(d)(4).” (emphasis in original).
The Treasury Guidance described and quoted, in part, above, was created for
the Section 1603 program for the purpose of educating potential applicants. In addition,
Mr. Settle, from NREL, noted that NREL referenced the guidance in its decision making.
Mr. Settle stated:
Q. And is NREL and Treasury required to follow this guidance
document in reviewing applications?
A. I would say it’s a part of our review process, but underlying it all
is section 45 and 48, so there are times when that clarification is needed
between what the guide actually says and what’s actually in the code or in
tax policy.
Q. But if something is stated in the guidance document, that’s generally
going to be followed by both NREL and Treasury; correct?
A. I’d say generally, yes.
According to the Treasury Guidance, “[p]roperty is an integral part of a qualified
facility if the property is used directly in the qualified facility and is essential to the
completeness of the activity performed in that facility.” Mr. Settle from NREL further
testified that the team considered whether something was an “integral part” of a
qualified facility under this definition. At trial, Mr. Settle discussed the example of
roadways in the Treasury Guidance, quoted above, stating that NREL and the
Department of the Treasury considered roadways as part of a project’s cost basis and
integral to the project when they “are necessary for, for example, getting from one wind
turbine to another wind turbine. We have disallowed those which basically have to do
with visitors, employee parking, and so forth.” Even Mr. Markell, defendant’s expert
witness, was asked if the gas conditioning system was “integral” to the RP1 and SJ-1
projects, and responded in the affirmative: “In the way that I see the term ‘project’
defined as including all of the equipment under UTS, I would say yes, it is integral.”
Given that Mr. Markell later agreed that “plant” can be seen to be the same as “project,”
defendant’s own expert witness essentially indicated that the gas conditioning
equipment is “integral” to a fuel cell power plant. A review of the trial record supports
this conclusion.
Trash Facility
The parties jointly stipulate that the second issue before the court is
“alternatively, whether the gas conditioning equipment, either in combination with the
other equipment in the projects or individually, qualifies for payment as a qualified
facility under § 1603(d)(1) as a ‘trash facility’ as defined by 26 U.S.C. § 45(d)(7).”
Section 1603(d)(1) allows a thirty percent grant for:
99
(1) QUALIFIED FACILITIES.—Any qualified property (as defined in
section 48(a)(5)(D)[ 47] of the Internal Revenue Code of 1986) which is part
of a qualified facility (within the meaning of section 45 of such Code)
described in paragraph (1), (2), (3), (4), (6), (7), (9), or (11) of section
45(d) of such Code.
(capitalization in original). Relevant to the court’s analysis, Section 1603(d)(1) allows
grants for “QUALIFIED FACILITIES” that meet the requirements regarding energy
facilities discussed in any of the paragraphs, (1), (2), (3), (4), (6), (7), (9), or (11) of
I.R.C. § 45(d) (2012). (capitalization in original). Looking at one of the paragraphs,
I.R.C. § 45(d)(7), in particular:
(7) Trash facilities
In the case of a facility (other than a facility described in paragraph (6))
which uses municipal solid waste to produce electricity, the term “qualified
facility” means any facility owned by the taxpayer which is originally placed
in service after the date of the enactment of this paragraph and the
construction of which begins before January 1, 2015.[ 48] Such term shall
include a new unit placed in service in connection with a facility placed in
service on or before the date of the enactment of this paragraph, but only
47 I.R.C. § 48(a)(5)(D) states:
(D) Qualified property
For purposes of this paragraph, the term “qualified property” means
property—
(i) which is—
(I) tangible personal property, or
(II) other tangible property (not including a building or its
structural components), but only if such property is used as
an integral part of the qualified investment credit facility
(ii) with respect to which depreciation (or amortization in lieu of
depreciation) is allowable.
I.R.C. § 48(a)(5)(D) (2012) (emphasis in original).
48 Section 155 of the Tax Increase Prevention Act of 2014 more recently amended
I.R.C. § 45(d)(7) by striking “January 1, 2014” and inserting “January 1, 2015.” See Tax
Increase Prevention Act of 2014, Pub. L. No. 113-295, 128 Stat. 4010, 4021.
100
to the extent of the increased amount of electricity produced at the facility
by reason of such new unit.
I.R.C. § 45(d)(7) (2012) (emphasis in original); see also Tax Increase Prevention Act of
2014, Pub. L. No. 113-295, 128 Stat. 4010, 4021 (amending I.R.C. § 45(d)(7) by striking
“January 1, 2014” and inserting “January 1, 2015.”). I.R.C. § 45(d)(6) covers: “(6)
Landfill gas facilities,” which are facilities “producing electricity from gas derived from
the biodegradation of municipal solid waste . . . .” (emphasis in original). In the same
section 45 of the Internal Revenue Code, I.R.C. § 45(c)(6) states: “The term ‘municipal
solid waste’ has the meaning given the term ‘solid waste’ under section 2(27) of the
Solid Waste Disposal Act (42 U.S.C. 6903).” Solid waste is defined in 42 U.S.C. §
6903(27) as:
The term “solid waste” means any garbage, refuse, sludge from a waste
treatment plant, water supply treatment plant, or air pollution control facility
and other discarded material, including solid, liquid, semisolid, or
contained gaseous material resulting from industrial, commercial, mining,
and agricultural operations, and from community activities, but does not
include solid or dissolved material in domestic sewage, or solid or
dissolved materials in irrigation return flows or industrial discharges which
are point sources subject to permits under section 1342 of title 33,
or source, special nuclear, or byproduct material as defined by the Atomic
Energy Act of 1954, as amended (68 Stat. 923) [42 U.S.C. 2011 et seq.].
42 U.S.C. § 6903(27) (2012) (brackets in original).
Plaintiffs contend that, “[u]nder Code § 45(d)(7), as incorporated into Section
1603(d)(1), a ‘trash facility’ means ‘a facility (other than a facility described in paragraph
(6) [i.e., a landfill gas facility]) which uses municipal solid waste to produce electricity.”
Plaintiffs contend that the only item in dispute is whether the wastewater treatment
plants that the RP1 and SJ-1 facilities rely on for biogas treat “municipal solid waste.”
According to plaintiffs:
For this purpose, the term “sludge” is defined expressly as “any solid,
semisolid or liquid waste generated from a municipal, commercial, or
industrial wastewater treatment plant, water supply treatment plant, or air
pollution control facility or any other such waste having similar
characteristics and effects.” 42 U.S.C. 6903(26A). Thus, “sludge from a
wastewater treatment plant” is “solid waste” under the Solid Waste
Disposal Act and, by incorporation, “municipal solid waste” under Code §
45(c)(6) and (d)(7).
Plaintiffs also point out that the definition of solid waste explicitly includes “sludge from a
waste treatment plant.” Plaintiffs assert that “[t]he wastewater sludge at the Inland
Empire and San Jose wastewater plants is a ‘municipal waste,’” and, therefore, because
101
the RP1 and SJ-1 facilities take biogas, which is formed from treating municipal solid
waste, they meet all the requirements of I.R.C. § 45(d)(7) to be termed a “trash facility,”
and are “QUALIFYING FACILITIES” under Section 1603. (capitalization in original).
Plaintiffs also cite to NREL’s Mr. Settle’s trial testimony and allege, “Mr. Settle in fact
conceded that Treasury and NREL would award the grant for the gas conditioning
equipment if it were a trash facility.”
Plaintiffs further cite to a recent IRS Revenue Ruling, Private Letter Ruling
201419006 (May 9, 2014), which plaintiffs allege “supports treating wastewater sludge
as ‘municipal solid waste’ for purposes of the trash facility definition.” In addition,
plaintiffs point to the Treasury Guidance for the Section 1603 program, and argue:
More importantly, in the case of a trash facility, Treasury’s guidance
document states specifically: “If the facility uses a gas or liquid derived
from open-loop biomass, closed-loop biomass, or municipal solid waste to
produce electricity, equipment used to produce and process such gas or
liquid may also be an integral part of the facility.” Under these rules, the
gas conditioning equipment would be treated as an “integral part” of the
trash facility.
(internal citations omitted).
Relevant to this court’s analysis, under Section 1603(d)(1), a thirty percent grant
is available to “[a]ny qualified property . . . described in paragraph (1), (2), (3), (4), (6),
(7), (9), or (11) of [I.R.C.] section 45(d) of such Code.” As noted above, paragraph (7) of
I.R.C. § 45(d) includes as a “Trash facilit[y]” a “facility,” other than a landfill gas facility
“which uses municipal solid waste to produce electricity,” provided the facility meets
some placed in service requirements discussed further below in this opinion. 49 See
I.R.C. § 45(d)(7).
49 The statute also states that, within an existing “trash facility,” “the term ‘qualified
facility’ means any facility owned by the taxpayer which is originally placed in service
after the date of the enactment of this paragraph and the construction of which begins
before January 1, 2015.” This language does not indicate that the trash facility has to be
owned entirely by the taxpayer, but instead, that the taxpayer will only be able to
recover a grant on the “qualified facility” that it owns. See I.R.C. § 45(d)(7). As indicated
by Mr. Settle at trial,
Q. Okay. And so just to go back to my question, does the ownership of the
actual fuel source have any relevance to the determination of whether in
this case the production or processing or the processing equipment is
eligible for a Treasury grant?
A. No. I think you could actually take a gas or liquid produced from one of
those facilities and use it in your energy property and qualify it.
102
Although the RP1 and SJ-1 facilities do not take in any municipal solid waste
because they operate on biogas, plaintiffs contend that the anaerobic digesters, which
process allegedly “municipal solid waste,” also count as part of a “[t]rash facilit[y]” for
the purposes of I.R.C. § 45(d)(7), even though plaintiffs do not own them. In support,
plaintiffs contend that a document titled: “Payments for Specified Energy Property in
Lieu of Tax Credits Under the American Recovery and Reinvestment Act of 2009
FREQUENTLY ASKED QUESTIONS AND ANSWERS,” (capitalization and emphasis
in original), issued by the Department of the Treasury and submitted as a joint exhibit,
explains “that a trash facility qualifies for the Section 1603, even if the equipment used
to convert the municipal solid waste into a gas or liquid (i.e., ‘conversion equipment’) is
under different ownership.” One question and answer addresses eligibility for a Section
1603 grant for a trash facility when the “conversion equipment” (or the “equipment used
to produce the gas or liquid,” in this case, the anaerobic digester) is owned by a
separate, third party:
Question: In the case of a qualified facility that produces electricity by
burning gases or liquids derived from a qualified energy resource such as
open-loop biomass or municipal solid waste, can the equipment used to
convert the qualified energy resource into a gas or liquid qualify for a
Section 1603 payment?
Answer: Yes, but only if the equipment used to produce the gas or liquid
(the conversion equipment) is an integral part of the qualified facility. In
general, conversion equipment that is owned by the same person and
located at the same site as the qualified facility will be treated as an
integral part of the facility. In addition, the conversion equipment may be
treated as an integral part of the qualified facility, even if under different
ownership or at a different site, if it is established that the conversion
equipment is integrated into the facility. Factors that may be relevant in
determining whether the conversion equipment is integrated into the
facility include whether the conversion equipment and the facility are
placed in service simultaneously, the extent to which the gas or liquid
produced is dedicated to the facility (for example, under an exclusive long-
term supply contract), and the dependence of the facility on the gas or
liquid produced by the conversion equipment. Conversion equipment
generally will not be treated as an integral part of a qualified facility if less
than 75 percent of the gas or liquid produced is dedicated to the facility. In
addition, if conversion equipment is treated as an integral part of a
qualified facility but not all the gas or liquid produced is dedicated to that
facility, the conversion equipment’s eligible cost basis is limited to the
percentage of its otherwise eligible cost corresponding to the percentage
of its production that is dedicated to the qualified facility.
(emphasis in original). The “FREQUENTLY ASKED QUESTIONS AND ANSWERS,”
(capitalization and emphasis in original), indicate that the anaerobic digester can be
103
combined with plaintiffs’ fuel cell facilities for the purpose of forming a “[t]rash
facilit[y],” (emphasis in original), under I.R.C. § 45(d)(7), “if it is established that the
conversion equipment is integrated into the facility.” The statute, I.R.C. § 45(d)(7), is
silent as to whether all the parts of a trash facility must be owned by a single person to
qualify, and the trial testimony indicates that the government, including Mr. Settle did not
believe this was the case. The factors listed by Treasury in their Frequently Asked
Questions are instructive regarding whether the RP1 and SJ-1 fuel cell facilities were
“integrated” with the adjacent located anaerobic digesters. Although the anaerobic
digesters were put into operation at the IEUA Regional Plant No. 1 and San Jose Water
Pollution Control plant long before the RP1 and SJ-1 facilities were built there, the
record indicates that the RP1 and SJ-1 fuel cell facilities operate almost entirely on the
biogas from anaerobic digesters, and the only source of anaerobic digester biogas for
the RP1 and SJ-1 facilities comes from the anaerobic digesters within the IEUA
Regional Plant No. 1 and San Jose Water Pollution Control Plant. Thus, the anaerobic
digesters at the RP1 and SJ-1 sites, according to the factors listed by Treasury, appear,
based on the record before the court, to be integrated with the fuel cell facilities at those
sites. 50
The record reflects that the adjacent anaerobic digesters and RP1 and SJ-1 fuel
cell facilities can be considered, in combination, as one integrated unit. Nonetheless, in
order to be a qualified trash facility, this combination must still be one “which uses
municipal solid waste to produce electricity.” The parties stipulate that “[w]astewater
sludge” is a “by-product of the treatment of municipal wastewater, which may be used to
produce biogas in anaerobic digesters.” Defendant’s expert, Mr. Markell, stated that
“wastewater sludge” “goes into the anaerobic digesters to produce biogas.” The parties
also stipulated that “[s]ludge” is a “[g]eneric term that may include municipal sewage
sludge, wastewater sludge, and/or biosolids.” The record indicates that “biosolids” is a
term used by plaintiffs’ expert, Mr. Wason, as well as by Anaergia and the IEUA to
describe the material that enters into an anaerobic digester. 51 As previously noted
50As noted above, case law suggests that facilities can be considered “integrated” when
they are essential to the operation of each other. See Armstrong World Indus., Inc. v.
Comm’r, 974 F.2d at 434 (Two components are “integrated” “when each component is
essential to the operation of the project as a whole and cannot be used separately to
any effect.”); Consumers Power Co. v. Comm’r, 89 T.C. 726 (“In our opinion, based
on the foregoing, the Ludington Plant must be viewed as one integrated unit because
the physical plant and the reservoir operate simultaneously and as a unit in order to
produce electrical power.”). Both the anaerobic digester and fuel cell facility would be
necessary to create a “[t]rash facilit[y]” “which uses municipal solid waste to produce
electricity.” See I.R.C. § 45(d)(7). The anaerobic digester is necessary to convert the
municipal solid waste into biogas, and the fuel cell facility is necessary to convert the
biogas into electricity.
51 In the record, including in Mr. Wason’s expert report, biosolids or “[w]astewater
sludge” are the products of a “[W]astewater [T]reatment” facility, which are then sent to
an anaerobic digester for further processing and conversion into biogas.
104
above, I.R.C. § 45(c)(6) states: “[t]he term ‘municipal solid waste’ has the meaning
given the term ‘solid waste’ under section 2(27) of the Solid Waste Disposal Act (42
U.S.C. 6903).” Again, for reference, solid waste is defined in 42 U.S.C. § 6903 as
follows:
The term “solid waste” means any garbage, refuse, sludge from a waste
treatment plant, water supply treatment plant, or air pollution control facility
and other discarded material, including solid, liquid, semisolid, or
contained gaseous material resulting from industrial, commercial, mining,
and agricultural operations, and from community activities, but does not
include solid or dissolved material in domestic sewage, or solid or
dissolved materials in irrigation return flows or industrial discharges which
are point sources subject to permits under section 1342 of title 33, or
source, special nuclear, or byproduct material as defined by the Atomic
Energy Act of 1954, as amended (68 Stat. 923) [42 U.S.C. 2011 et seq.].
42 U.S.C. § 6903(27) (2012) (brackets in original). From a reading of the words of the
statute, a number of the categories fit within the definition of “solid waste” in 42 U.S.C.
§ 6903(27), including, “sludge from a waste treatment plant” or “water supply treatment
plant,” “garbage,” or discarded “solid, liquid, semisolid” waste resulting from community
activities. See id.
The court also notes that Mr. Markell, in his expert report for the defendant, gave
alternate definitions for “Municipal Solid Waste” and for “Municipal Sewage Sludge.”
According to Mr. Markell’s report:
In the power industry it is more common to see trash more specifically
defined as one of the following:
o Municipal Solid Waste (“MSW”) – The U.S. Environmental
Protection Agency defines MSW as “Municipal Solid Waste
(MSW)—more commonly known as trash or garbage—consists of
everyday items we use and then throw away, such as product
packaging, grass clippings, furniture, clothing, bottles, food scraps,
newspapers, appliances, paint, and batteries. This comes from our
homes, schools, hospitals, and businesses.”
o Municipal Sewage Sludge (“MSS”) –typically viewed as sewage or
solid waste from wastewater treatment facilities (treated MSS is
commonly called Biosolids).
(emphasis in original). Notably, Mr. Markell in his expert report appears to refer to the
“[b]iosolids” produced from wastewater treatment facilities, which are then sent to
anaerobic digesters for further processing, as “solid waste.” Furthermore, in response to
a question and at trial, Mr. Markell indicated that anaerobic digesters process municipal
solid waste.
105
Q. Do you agree that the wastewater sludge at the Inland Empire and San
Jose wastewater plants is a municipal waste?
A. I think that’s a viable definition. Yes.
Mr. Markell also agreed at trial that anaerobic digester biogas is produced “from the
anaerobic digestion of the solids in that wastewater sludge.” Plaintiffs point the court to
an EPA publication, “Identification of Non-Hazardous Secondary Materials That Are
Solid Waste,” 76 Fed. Reg. 15456, 15514 (Mar. 21, 2011), which states “EPA has long
viewed sewage sludge generated from POTWs [Publicly Owned Treatment Works] as a
solid waste.” 52
Defendant, in a footnote in its brief, contends that “[i]t is far from clear that the
sludge would qualify under the RCRA [Resource Conservation and Recovery Act]
definition, which refers to ‘sludge from a waste treatment plant,’” quoting 42 U.S.C.
§ 6903(27). Defendant alleges that “Plaintiffs would need to demonstrate both that it is a
waste and that it is ‘generated from’ a POTW, as opposed to being generated ‘during
treatment.’” As indicated in Mr. Wason’s expert report for plaintiffs, and from the record,
including a diagram in the record, however, the “sludge” or “[b]iosolids” entering an
anaerobic digester have already been treated, and are not “in treatment.” Moreover, as
explained above, anaerobic digesters are not required at a waste water treatment plant.
Instead, they help to reduce the mass of treated materials, and produce biogas for
electricity. The sludge that enters an anaerobic digester already has been treated by a
wastewater treatment facility, and, thus, meets the definition of “sludge from a waste
treatment plant.” 42 U.S.C. § 6903(27). A review of the record and statutes, therefore,
indicates that the sludge, wastewater sludge and biosolids that enter an anaerobic
digester fit within the definition of solid waste under 42 U.S.C. § 6903(27), and are
municipal solid waste under I.R.C. § 45(c)(6). As a result, the RP1 and SJ-1 fuel cell
facilities, “integrated” with the anaerobic digesters at the IEUA Regional Plant No. 1 and
San Jose Water Pollution Control Plant, qualify as “[t]rash facilities” pursuant to I.R.C.
§ 45(d)(7). (emphasis in original). 53
52 As defendant itself notes, both the IEUA and San Jose Water Pollution Control Plant
are Publicly Owned Treatment Works, which means they are publicly owned
wastewater treatment facilities. See also Vocabulary Catalog List Detail - Environmental
Issues Terms & Acronyms, Envtl. Prot. Agency, http://ofmpub.epa.gov/sor_internet (last
visited Mar. 31, 2015).
53 Plaintiffs also provided an IRS Private Letter Ruling which plaintiffs allege “supports
treating wastewater sludge as ‘municipal solid waste’ for purposes of the trash facility
definition.” The May 9, 2014 ruling addresses an issue similar to the case currently
before the court. According to the letter, the taxpayer “will use sludge from an adjacent
sewage treatment plant owned by the Water District (Water District Plant) as well as
sludge imported from other sewage treatment facilities as fuel to produce renewable
electricity.” IRS Priv. Ltr. Rul. 201419006 (May 9, 2014). The taxpayer sought a
106
Looking back to why NREL and the government did not, during their Section
1603 review at the administrative level, credit plaintiffs’ facilities as trash facilities, it
appears that primarily it was because plaintiffs did not check the box for trash facility on
their Section 1603 applications. Therefore, the defendant’s agency evaluators did not
consider whether the RP1 and SJ-1 facilities could be “integrated” with the anaerobic
digesters, and, in combination, thus meet the requirements of I.R.C. § 45(d)(7). In
addition, Mr. Settle, from NREL, when evaluating the RP1 and SJ-1 applications, stated
that: “We’d concluded that it was not qualified as a trash facility. It was not consuming,
from our perspective, municipal solid waste. It was actually taking digester gas into the
plant.” Mr. Settle further testified: “I think there was a letter from them at some point that
basically said, you know, we’re taking in municipal liquid waste, but we didn’t find that
they were actually taking in waste at all. They were taking digester gas.” Mr. Markell in
his expert report for the defendant and in his testimony apparently came to a similar
conclusion, and discounted that the anaerobic digester could have been considered in
the trash facility analysis:
Q. And was it relevant to your conclusion there that the projects -- that the
-- as you indicated on the chart earlier, that the project boundary starts at
the biogas?
A. That was relevant because the project itself is not dealing with the solid
sludge, sewage sludge, so they really aren’t dealing with any direct waste
products.
Mr. Markell admitted at trial, however, that his analysis was not based on a reading of
the Internal Revenue Code or Solid Waste Disposal Act.
In its submissions to the court, defendant only briefly addresses whether or not
RP1 and SJ-1 could qualify as a “[t]rash facilit[y]” under I.R.C. § 45(d)(7). 54 Defendant
determination of whether parts of its energy facility “are part of the ‘qualified facility’ for
purposes of § 45(d)(7).” Id. Plaintiffs contend that “[t]he IRS accepted the taxpayer’s
representation ‘that the sludge that will be used as a fuel in the Plant is “solid waste”
within the meaning of the Solid Waste Disposal Act (42 U.S.C. § 6903).’” A review of the
ruling indicates that because the taxpayer affirmatively “represented that the sludge that
will be used as a fuel in the Plant is ‘solid waste’ within the meaning of the Solid Waste
Disposal Act (42 U.S.C. § 6903),” the IRS appears not to have debated the issue and to
have taken the taxpayer’s representation at face value.
54 Notably, defendant does not argue that the anaerobic digesters cannot be considered
“integrated” with the RP1 and SJ-1 projects to form a trash facility under I.R.C
§ 45(d)(7). Defendant also does not question whether the gas conditioning equipment
would count as part of a trash facility under I.R.C § 45(d)(7). Regarding the latter issue,
the Section 1603(d)(1) “qualified facility” definition explicitly states that it includes “[a]ny
qualified property (as defined in section 48(a)(5)(D) of the Internal Revenue Code of
107
raises a number of arguments. Defendant first contends that the sites RP1 and SJ-1,
which operate at the IEUA Regional Plant No. 1, and the San Jose Waste Pollution
Control Plant, are not properly regulated in order to be termed “trash facilities.”
According to defendant:
The wastewater treatment plants, or POTWs [Publicly Owned Treatment
Works], at which the projects are installed, are not regulated by the
relevant state agency (to which RCRA regulatory authority is delegated)
as facilities that handle solid waste. Instead, POTWs like the ones at
which the projects are installed are regulated under the Federal Water
Pollution Control Act (also known as the Clean Water Act or “CWA”).
(internal citations omitted). According to defendant, “RCRA, which includes the
definition of solid waste that applies to trash facilities, specifically states that it shall not
be construed to apply to “any activity or substance which is subject to the Federal Water
Pollution Control Act [Clean Water Act] . . .” pursuant to 42 U.S.C. § 6905(a). (emphasis
in original). Defendant states that “Plaintiffs’ attempt to define solid waste to include
sewage sludge that is plainly regulated by the Clean Water Act would seem to run afoul
of that provision.” According to defendant, plaintiffs are excluded from defining the
sludge and biosolids handled by the anaerobic digesters connected to RP1 and SJ-1 as
“solid waste” under RCRA, which is a prerequisite for the RP1 and SJ-1 facilities to be
termed “trash facilities.”
Plaintiffs initially respond that the IEUA Regional Plant No. 1 and the San Jose
Waste Pollution Control Plant do not need to be regulated by the RCRA or the state:
“POTWs such as the Inland Empire and San Jose wastewater plants are effectively
exempted from those regulations and are deemed to have a solid waste permit,” citing
40 C.F.R. §§ 264.1(e), 270.1(c)(1)(ii) (2012). 55 Plaintiffs explain, regarding 42 U.S.C.
§ 6905(a), that “[t]his exemption does not convert the wastewater sludge from a ‘solid
waste’ to a non-solid waste under the Solid Waste Disposal Act. This exemption is a
product of the overlapping regulatory structure for solid wastes—the EPA regulates
1986).” I.R.C. § 48(a)(5)(D) specifically includes as “qualified property” any equipment
that is “an integral part of the qualified investment credit facility.” Defendant does not
appear to challenge the integral nature of the gas conditioning equipment to a trash
facility “which uses municipal solid waste to produce electricity.” The gas conditioning
equipment is a necessary element for cleaning biogas produced from municipal solid
waste, before it is converted to fuel, even if the power plant is not a fuel cell. At trial, Mr.
Settle, from NREL, affirmed that, if the RP1 and SJ-1 facilities were to be viewed as part
of a “trash facility,” gas conditioning equipment would be included, “because the gas
conditioning equipment is an integral part of that particular facility.”
55 The parties have stipulated that “[n]either Regional Plant No. 1 nor the RP1 Project
has been regulated by the California Department of Resources Recycling and Recovery
(‘CalRecycle’) as a permitted solid waste facility,” and that “[n]either WPCP nor the SJ-1
Project has been regulated by CalRecycle as a permitted solid waste facility.”
108
wastewater plants, including wastewater sludge, under the Clean Water Act . . . .”
Plaintiffs add that, regardless, “[t]he inescapable fact is that wastewater sludge is ‘solid
waste’ because the RCRA says it is and the EPA says it is.”
Defendant appears, incorrectly, to contend that simply because the IEUA
Regional Plant No. 1 and San Jose Water Pollution Control Plant are publically owned
treatment works, regulated by the Clean Water Act, the text of RCRA is not applicable.
It is correct that at the start of RCRA, there is a clause that exempts RCRA from
applying to entities regulated under other statutes, such as the Clean Water Act, also
known as the Federal Water Pollution Control Act. Pursuant to 42 U.S.C. § 6905(a):
Nothing in this chapter [RCRA] shall be construed to apply to (or to
authorize any State, interstate, or local authority to regulate) any activity or
substance which is subject to the Federal Water Pollution Control Act [33
U.S.C. 1251 et seq.], the Safe Drinking Water Act [42 U.S.C. 300f et seq.],
the Marine Protection, Research and Sanctuaries Act of 1972 [16 U.S.C.
1431 et seq., 1447 et seq., 33 U.S.C. 1401 et seq., 2801 et seq.], or the
Atomic Energy Act of 1954 [42 U.S.C. 2011 et seq.] except to the extent
that such application (or regulation) is not inconsistent with the
requirements of such Acts.
42 U.S.C. § 6905(a). This clause is an anti-duplication provision, the purpose of which is
to prevent entities from being regulated by two different, overlapping and duplicative,
environmental regulatory schemes. See Jones v. E.R. Snell Contractor, Inc., 333
F. Supp. 2d 1344, 1350 (N.D. Ga.) (Discussing 42 U.S.C. § 6945(a), the court stated:
“In section 6905, Congress provided the EPA with guidelines for applying and
integrating the [Resource Conservation and] Recovery Act with other legislation,
including the Clean Water Act. In pertinent part, Congress stated that the Recovery Act
regulations could not be inconsistent with the Clean Water Act, and should, to the
maximum extent possible, avoid duplication with its provisions.”), aff’d, 120 F. App’x 786
(11th Cir. 2004), cert. denied, 544 U.S. 962 (2005). The point of an anti-duplication
provision such as 42 U.S.C. § 6905(a) is to prevent the burdens of compliance with
RCRA from applying to an entity that already is subject to the regulatory environment of
the Clean Water Act. See id. As plaintiffs point out, one way this anti-duplication
provision is made effective is through presumed permitting of publically owned
treatment works regulated under the Clean Water Act. See 40 C.F.R. § 270.1 (2012)
(“However, the owner and operator of a publicly owned treatment works receiving
hazardous waste will be deemed to have a RCRA permit for that waste if they comply
with the requirements of [40 C.F.R.] § 270.60(c) (permit-by-rule for POTWs).”).
The anti-duplication provision of RCRA, 42 U.S.C. § 6905(a), does not prevent
other parts of the United States Code from referencing the text of RCRA for other
purposes, such as in this case, using the definition of “solid waste” in RCRA for
determining the Treasury grant at issue. Here, section 45(c)(6) of the Internal Revenue
Code is referencing a provision of RCRA for its definition. See I.R.C. § 45(c)(6) (“The
term ‘municipal solid waste’ has the meaning given the term “solid waste” under section
109
2(27) of the Solid Waste Disposal Act (42 U.S.C. 6903).”). Moreover, the RCRA anti-
duplication provision, 42 U.S.C. § 6905(a), does not apply to this case. The provision
states that: “Nothing in this chapter shall be construed to apply to (or to authorize any
State, interstate, or local authority to regulate) any activity or substance which is subject
to the Federal Water Pollution Control Act [Clean Water Act] . . . .” See 42 U.S.C. §
6905(a). This provision suggests that an “activity or substance” regulated under the
Clean Water Act is not to be regulated under RCRA. See id. A Treasury grant pursuant
to I.R.C. § 45(d)(7) is not an “activity or substance” regulated under the Clean Water
Act.
Defendant also contends that the legislative history of Section 1603 indicates that
“[t]rash facilities” under I.R.C. § 45(d)(7) must use a turbine to process the biogas
created from the waste, not fuel cells. (emphasis in original). According to defendant,
“Congress in enacting § 1603 contemplated the same type of ‘trash facilities’ using
turbines to generate electricity since the inception of section 45(d)(7).” Defendant draws
upon legislative history to come to its conclusion. Defendant states:
The legislative history of the section makes this clear. When § 45(d)(7)
was first enacted into the Code as “trash combustion facility,” P.L. 108-
357, § 710(b)(1), 118 Stat. 1418, 1552 (2004), the scope of “trash
combustion facilities” contemplated by Congress was rather narrow:
facilities that “burn municipal solid waste (garbage) to produce steam to
drive a turbine for the production of electricity.” H. Rep. No. 108-755, at
511 (Conf. Rep.). Although the word “combustion” was eliminated in an
amendment in 2008, the Emergency Economic Stabilization Act of 2008,
Pub. L. 110-343, § 101(c)(2), 122 Stat. 3765, 3809 (2008), the change
merely was intended to permit facilities to gasify municipal solid waste so
that the facilities can “burn such gas as part of an electricity generation
process.” H. Rep. No. 110-658, at 49; see Def. Ex. 2000, DX 1503,
¶ 7.3.1. Thus, the requirement of using a turbine to generate electricity
arguably remained the same. In fact, in 2009 when Congress passed
§ 1603, it also passed a provision extending the tax credit for trash
facilities. In the legislative history accompanying that latter provision,
“trash combustion [sic] facilities” were explicitly described as facilities that
“use municipal solid waste (garbage) to produce steam to drive a turbine
for the production of electricity.” H. R. Rep. No. 116-16, at 613 (2009)
(Conf. Rep.) (emphasis added). Thus, except for changing the word from
“burn” to “use” to accommodate the 2008 amendment, Congress in
enacting § 1603 contemplated the same type of “trash facilities” using
turbines to generate electricity since the inception of section 45(d)(7).
(footnote omitted; emphasis in original). At trial, Mr. Markell, defendant’s expert witness,
offered testimony in support of defendant’s argument. Mr. Markell stated:
It’s really based on my experience with working with waste-to-
energy projects. A typical waste-to-energy project will burn municipal solid
110
waste or MSW to generate steam and go through a steam turbine to
generate power that way.
So looking at a waste-to-energy project that way, RP1 and SJ-1 are
not what I would consider waste-to-energy projects.
Defendant’s reliance on legislative history, however, overlooks the plain
language of the Internal Revenue Code. The relevant portion of I.R.C § 45(d)(7) states:
Trash facilities
In the case of a facility (other than a facility described in paragraph (6))
which uses municipal solid waste to produce electricity, the term “qualified
facility” means any facility owned by the taxpayer which is originally placed
in service after the date of the enactment of this paragraph and the
construction of which begins before January 1, 2015.
The definition in I.R.C. § 45(d)(7) does not reference a requirement to use a turbine to
process the biogas created from the waste, rather than fuel cells. In addition, a review of
the legislative history indicates that the changes defendant described above, for
example, the removal of the word “combustion,” and the changing of “burn” to “use,”
indicates Congressional intent as the statute has evolved to expand the types of
facilities available for a grant under I.R.C. § 45(d)(7). Defendant’s references to
legislative history do not compel the court to disregard the plain language of I.R.C.
§ 45(d)(7).
Finally, defendant also raises two arguments for why, even if plaintiffs’ facilities
qualify as trash facilities under I.R.C. § 45(d)(7), plaintiffs still should not receive a grant
under Section 1603(d)(1) that includes the value of the gas conditioning equipment.
Defendant first argues that, because the RP1 and SJ-1 facilities also burn natural gas,
and natural gas, allegedly, is not a qualifying fuel for a trash facility, plaintiffs’ payments
under Section 1603 would have to be pro-rated to account for how much of the
electricity produced by their facilities came from anaerobic digester biogas versus the
natural gas. Defendant states that “[a]s the Treasury Guidance explains, the ‘eligible
basis of a qualified facility does not include the portion of the cost of the facility that is
attributable to a non-qualifying activity.’” Defendant, quoting an October 29, 2013 IEUA
“Fuel Cell Update” in the record, calculates that plaintiffs’ facilities only operated on
anaerobic digester biogas “‘68.9% of [the] time,’” for the alleged period of interest, and
therefore, their pro-rated grant would be less than what plaintiffs have already received.
(modification in original).
Plaintiffs respond that “[t]he fuel cell equipment qualifies under Code
§ 48(c)(1)(C), without reduction, regardless of whether it uses natural gas.” In addition,
plaintiffs note that “digester gas conditioning equipment cleans only qualifying digester
gas from the wastewater treatment plants (i.e., a qualifying activity). Treasury’s own
guidance indicates that this type of equipment separately qualifies for the Section 1603
111
grant, without any reduction . . . .” Plaintiffs add that “[e]ven if Treasury had the authority
to apply a ‘haircut,’ which it does not, its calculations are not correct,” because they
refer to calculations of fuel cell usage just after startup. Plaintiffs argue that it is unfair to
consider this snapshot period as indicative, considering that “[a]s the testimony in this
case showed, the design of the RP1 Project was to operate on no less than 75 percent
digester gas and the design of the SJ-1 Project was to operate on 100 percent digester
gas,” but that defendant instead has looked at just the period of time in which the
facilities were starting operation.
Defendant’s argument appears to rely primarily on the Treasury Guidance for the
Section 1603 program, in the section under “Eligible Basis,” (emphasis in original),
which states that “[t]he basis of property is determined in accordance with the general
rules for determining the basis of property for federal income tax purposes.” The
guidance document continues:
Limitation on eligible basis. The eligible basis of a qualified facility does
not include the portion of the cost of the facility that is attributable to a non
qualifying activity[ 56]. For example, for a biomass facility that burns fuel
other than open-loop biomass or closed-loop biomass,[ 57] the eligible cost
basis is the percentage of total eligible costs that is equal to the
percentage of the electricity produced at the facility that is attributable to
the open-loop biomass and closed-loop biomass. In the case of costs that
relate to both a nonqualifying activity and a qualifying activity, the costs
must be reasonably allocated between the nonqualifying and qualifying
activities. For example, if combustion equipment burns both qualifying
biomass and other fuel, the equipment’s eligible cost basis is limited to the
percentage of its otherwise eligible cost corresponding to the percentage
of the equipment’s electricity production that is attributable to the
qualifying biomass. Similarly, the eligible basis of a qualified hydropower
facility producing incremental hydropower includes the entire costs of the
modification even though only a portion of the power produced from the
modification is attributable to the modification.
Although plaintiffs are correct that gas conditioning equipment only works with
anaerobic digester biogas, defendant also is correct to note that the cost basis for the
entire RP1 or SJ-1 facility might have to be recalculated if a grant were to be awarded to
56“[N]onqualifying activity” appears to be a new term introduced in the Treasury
Guidance, and is not reflected in the Internal Revenue Code at sections 45 or 48, or
Section 1603. See generally Section 1603; I.R.C. §§ 45, 48.
57 Open-loop and close-loop biomass facilities are defined in I.R.C. § 45(d)(2), (3).
Biomass facilities are not the same as trash facilities. Biomass facilities relate to the
production of electricity from “organic material from a plant which is planted exclusively
for purposes of being used at a qualified facility to produce electricity,” or from wood or
agricultural waste. See I.R.C. § 45(c)(2), (3).
112
plaintiffs as a “trash facility.” On the one hand, the Treasury Guidance appears to
indicate that a nonqualifying activity may include the production of electricity from
natural gas, since natural gas is not a qualified energy resource under I.R.C. § 45(c).
The language of the Treasury Guidance indicates that this could affect the overall RP1
and SJ-1 cost basis:
For example, if combustion equipment burns both qualifying biomass and
other fuel, the equipment’s eligible cost basis is limited to the percentage
of its otherwise eligible cost corresponding to the percentage of the
equipment’s electricity production that is attributable to the qualifying
biomass.
The government’s reliance on the Treasury Guidance, however, may be limited
because it refers to biomass facilities, not trash facilities or facilities that use municipal
solid waste. In addition, the interplay between the Treasury Guidance and Treasury
Frequently Asked Questions document is unclear. The Frequently Asked Questions
document appears to address a similar question:
Question: Is the eligible cost basis of the conversion equipment reduced if
the qualifying facility of which it is a part burns fuel other than fuel that the
conversion facility produces from qualified energy resources?
Answer: No, not if all fuel produced by the conversion equipment is used
by the qualifying facility in the production of electricity.
(emphasis in original). The Treasury’s answer to the question appears to indicate that
as long as the conversion facility, such as an anaerobic digester, is used full-time in a
qualifying manner, its cost basis might be considered in full, even if other parts of the
qualifying facility partake in non-qualifying activities.
Returning to the language of Section 1603 for clarification, grants are available
to:
(1) QUALIFIED FACILITIES.—Any qualified property (as defined in
section 48(a)(5)(D) of the Internal Revenue Code of 1986) which is part of
a qualified facility (within the meaning of section 45 of such Code)
described in paragraph (1), (2), (3), (4), (6), (7), (9), or (11) of section
45(d) of such Code.
Section 1603(d)(1). Section 1603 does not address additional limitations on grant
eligibility due to use of a facility for nonqualifying purposes. Section 45(a) of the Internal
Revenue Code gives a general rule for I.R.C. § 45:
113
(a) General rule
For purposes of section 38, the renewable electricity production credit for
any taxable year is an amount equal to the product of—
(1) 1.5 cents, multiplied by
(2) the kilowatt hours of electricity—
(A) produced by the taxpayer—
(i) from qualified energy resources, and
(ii) at a qualified facility during the 10-year period
beginning on the date the facility was originally placed
in service, and
(B) sold by the taxpayer to an unrelated person during the
taxable year.
I.R.C. § 45(a) (emphasis in original). Defendant’s reduction calculation is rooted in the
term “qualified energy resources.” Defendant states that, for the RP1 and SJ-1 projects,
“their overall basis would then be reduced by the percentage that is attributable to
electricity production that is not from a qualified source. See § 45(a)(2)(A)(i) (credit only
for electricity from eligible sources).” The court notes, however, that the grant
requirement under Section 1603(d)(1), and the definition of trash facility in I.R.C. §
45(d)(7), refer to qualified facilities described within I.R.C. § 45(d), not “qualified energy
resources,” which are described separately within I.R.C. § 45(c). If a facility is a qualified
facility, there does not appear to be a basis in the statute, I.R.C. § 45, for giving only a
partial grant to the facility owner because the same facility might also use natural gas or
any other non-qualified energy resource. The court notes that the primary and intended
use of the applicant’s facility is considered when making the initial determination of
whether or not the facility is a qualified facility under Section 1603. For example,
regarding the determination of whether the anaerobic digesters were “integrated” within
the RP1 and SJ-1 fuel cell facilities, a factor considered is how much the RP1 and SJ-1
facilities use the anaerobic digester biogas produced by the anaerobic digesters.
Finally, defendant also contends that, even if the RP1 and SJ-1 facilities are part
of a trash facility under I.R.C. § 45(d)(7), plaintiffs would nonetheless be statutorily
barred from receiving a reward because “they are not the first trash facilities to be
placed in service at the sites. Both SJ-1 and RP1 replaced previous on-site electrical
generation that used the same biogas.” Defendant’s argument is repeated below:
Here, if plaintiffs are correct that their projects, which take biogas from
digesters, clean it, and produce electricity, qualify as trash facilities, then
114
they are not the first trash facilities to be placed in service at the sites.
Both SJ-1 and RP1 replaced previous on-site electrical generation that
used the same biogas. As a result, they are “new units” under § 45(d)(7).
That creates a problem for plaintiffs’ claim, no matter when the prior facility
was placed in service. If the original trash facilities, i.e., the prior engine-
generation setup, were placed in service prior to the enactment, as seems
most likely, the projects fall within the “new units” under § 45(d)(7).
Accordingly, the projects qualify “only to the extent of the increased
amount of electricity produced at the facility by reason of such new unit.”
§ 45(d)(7). The projects, however, did not increase the electrical
generation capacity at all. At RP1, the 2.4 MW fuel cell replaced previous
reciprocating engines that also generated 2.4 MW of electricity. At SJ-1,
the 1.4 MW fuel cell replaced prior generators that had a capacity of 5.2
MW. Because there is no evidence that additional electricity would be
generated as a result of these new units, and, under the new unit rule of
§ 45(d)(7), the projects would not qualify as a trash facility.
If, instead, the original engines were placed in service after October 22,
2004, then the projects would not qualify because they do not fall within
the definition, which does not seem to include new units on facilities that
post-date the paragraph (presumably because they are simply replacing
existing ones that already received a tax credit).
Not only does this bar their trash facility claim, but it demonstrates why
they should not qualify in any event: RP1 and SJ-1 are more appropriately
viewed as fuel cell power facilities that use pre-existing biogas to generate
electricity than “trash facilities” that convert the waste to energy. The
digesters have been digesting sludge and producing biogas for decades,
and that (conditioned) biogas was used previously to produce electricity.
Plaintiffs are not capturing energy from otherwise unutilized waste. They
are just replacing prior energy generation equipment with a fuel cell. To
the extent Congress wanted to subsidize that type of replacement of one
type of prime mover with another, it is only through the tax credit and
§ 1603 payment for fuel cell power plants, not by claiming the entire
project as a trash facility.
(internal citations omitted; footnote omitted).
Defendant in a footnote also refers to the legislative history of I.R.C. § 45(d)(7),
stating:
Plaintiffs cannot circumvent the “new unit” rule by claiming that the
projects themselves independently qualify as a trash facility within the
meaning of section 45(d)(7) when they are only units of a pre-existing
facility. The legislative history accompanying the new unit rule indicates
that the new unit generally is electricity generation equipment that shares
115
“certain common equipment, such as trash handling equipment, with other
pre-existing units at the same facility.”
(emphasis in original; citation omitted).
Section 45(d)(7) of the Internal Revenue Code states:
(7) Trash facilities
In the case of a facility (other than a facility described in paragraph (6))
which uses municipal solid waste to produce electricity, the term “qualified
facility” means any facility owned by the taxpayer which is originally placed
in service after the date of the enactment of this paragraph and the
construction of which begins before January 1, 2015. Such term shall
include a new unit placed in service in connection with a facility placed in
service on or before the date of the enactment of this paragraph, but only
to the extent of the increased amount of electricity produced at the facility
by reason of such new unit.
Defendant notes that the record was not initially developed to provide evidence
of when the IEUA Regional Plant No. 1 and the San Jose Waste Pollution Control Plant
were put into service, and more factual discovery and development in the record would
be necessary. Nonetheless, assuming that plaintiffs’ anaerobic digesters and prior
reciprocating engines were in place prior to October 22, 2004, they would have been
considered trash facilities pursuant to I.R.C. § 45(d)(7). Thus, the RP1 and SJ-1 fuel cell
power plants could be considered “new units” of the broader trash facility. The record
indicates that the reciprocating engines that operated at both the RP1 and SJ-1 sites
beforehand had similar power outputs. Therefore, even if the RP1 and SJ-1 facilities
could be considered “Trash facilities” pursuant to I.R.C. § 45(d)(7), their eligibility as
“Qualified Facilities” under Section 1603(d)(1), might be limited to “the increased
amount of electricity produced at the facility by reason of such new unit.”
116
CONCLUSION
For the reasons discussed above, the gas conditioning equipment located at the
RP1 and SJ-1 fuel cell facilities are part of a “fuel cell power plant” pursuant to I.R.C.
§ 48(c)(1)(C), and, thus, are eligible for a Section 1603 grant as a “qualified fuel cell
property” pursuant to Section 1603(d)(2). The RP1 and SJ-1 fuel cell facilities,
integrated with the anaerobic digesters co-located at the same sites, also meet the
definitional requirements to be considered as “Trash facilities” under I.R.C. § 45(d)(7),
(emphasis in original), but the record before the court is not sufficiently developed on
the trash facilities issue for the court to be able to determine plaintiffs’ grant entitlement
under a “Trash Facility” qualification. As plaintiffs are eligible for the thirty percent
Section 1603 grant on the cost basis that includes the gas conditioning equipment at the
RP1 and SJ-1 sites, the court does not reach whether plaintiffs could have recovered
the amount sought under their alternative trash facility argument.
IT IS SO ORDERED.
s/Marian Blank Horn
MARIAN BLANK HORN
Judge
117